Cooling Spray Nozzle

SJPT Nozzle is hollow / full cone with spraying angle from 60 centigrade to 170 centigrade. Under 3 bar pressure, the flowing rate of liquid is 5.5--4140L/min.
It has an expedite flow channel design, which can decrease liquid barrier formax, capacity with certain size. Rotary spray nozzle can be installed or updated in lots of pipe system.
NPT/BSPT(male) Thread are provided. The common 1/4"-2" nozzles are made of , SS316, Teflon or PVC. Other selective materials can be used for special application.
Common application:
1.Exhaust gas filtration
2.Gas cooling
3.Washing and rinsing
4.Fireproofing and fire extinguishment

Cooling Tower Spray Nozzles
The nozzle of cooling tower is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower.

As a professional cooling tower spray nozzle manufacturer, we offer different types of water distribution spray nozzles for cooling towers. You can choose what you need from the following products.

WHAT IS A COOLING TOWER NOZZLE?
Cooling tower nozzles direct the hot water in need of cooling to the tower fill. These provide the water sprays to wet the fill. Uniform water distribution at the top of the fill is essential to achieve proper wetting of the entire fill surface. Nozzles can either be fixed in place and have either round or square spray patterns, or can be part of a rotating assembly as found in some circular cross-section towers. Cooling tower nozzles disperse water across the heat exchanger. They are usually made of PVC, glass or ceramic. Some nozzles are high-temperature resistant and have a non-clogging design. Cooling tower nozzles come in both cross flow and counter flow designs.

SOME BENEFITS OF COOLING TOWER NOZZLES
Non-Clogging

Low Pressure Design
Operational Adaptability
Efficient Performance
Virtually Maintenance-Free
Unique Solid Cone Spray Ensures Consistent Distribution
Easy Installation & Very Reliable
Evenly Distributes Water
Comes In Both Spray And Target, With Or Without Grommets

FLAT SPRAY NOZZLES
Type "C" flat nozzles are designed for high pressure washing applications. Flat nozzles are designed for high pressure washing applications. Their specially designed inner profile allows for even jet distribution, which results in effective and uniform cleaning action over the surface being processed. All nozzles are finished on high precision machinery assuring close manufacturing tolerances made out of AISI 316 grade stainless steel and all machinable material. Design: One piece construction, Non clogging type. Application: Surface Treatment, Roll Cooling, Degreasing & Rinsing, Lubricating, Industrial washing machines.


FULL CONE NOZZLES:
widely used in the industry, for a wide variety of applications. used in the industry, for a wide variety of applications. They maintain the simple design of the smaller nozzles, With the inherent resistance to clogging due to design of the X-vane and are often manufactured by any type of machinable material like SS304, SS316, PP/PVC etc. Flow Rate : 96 LPM to 1200 LPM Application : Surface spraying, Washing & Cooling of flue gasses to remove fly ash , Cooling condenser, Scrubbing, Foam breaking.

HOLLOW CONE NOZZLES:
These hollow cone nozzles work on the tangential flow principle and are manufactured by machine tool operation from metal bar stock. This offers versatile construction of small sized nozzles. In addition nozzles can be made on request from any special materials and alloys that are available as a bar stock. There are Following types of hollow cone nozzles: (1) Tangential Entry (2) Inline (Axial) Entry (3) Spiral Hollow cone. Design : Vaneless (Two Piece Construction ) Non clogging Application : Cooling & Washing of gas


TANK WASHING NOZZLES:
Suited for CIP systems. No motor source is needed due to the reaction force of the cleaning liquid... Suited for CIP systems. No motor source is needed due to the reaction force of the cleaning liquid to rotate spray head. Low pressure for cleaning and rinsing application. For rinsing small and medium sized vessels for example dairy, chemical, pharmaceutical and food industries. Material of construction-corrosion resistance TEFLON. Application : Cleaning of tanks up to 3 m in diameter. Self - rotating. Double bearings.

Material:metal (brass, stainless steel)
Plastic(pp, pvdf, ppr, pvc, pps etc)
Spray pattern: full/hollow cone, flat fan, solid stream
Spray droplet:fine mist, fog, light rain, fine drizzle
Application:cooling, cleaning, dust control, watering, landscaping, coating&painting, moisten, sterilization, surface treatment, fire control, add spice, adjust gas etc.

Standard exporting carton.

Highest quality industry spray nozzles.


Standard exporting packing

Spray nozzle

Spray nozzle

Relab manufactures a full of spray nozzles in the worldwide, including flat nozzle, full cone nozzle, unijet nozzle, washing nozzle, plastic nozzle, mixing nozzle, etc.

We can supply boron carbide and SiC spray nozzles , and except standard nozzles, we also can supply products according to customers requirement
Nozzes type:
1. Insert nozzles
2. Venturi nozzles
3. Stick-up nozzles
4. With lead-in nozzles
5. Other type
The jacket for nozzes is Al, nylon, PU, steel available.