Hydraulic Casing Scraper

CASE MW36 Wheel Loader - Typical Specifications
Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs)
Bucket Capacity: Generally around 0.65 to 0.9 cubic meters
Dimensions:
Overall Length: Approximately 4.0 m (varies with configuration)
Width: Roughly 2.5 m
Height: Around 3.0 m
Lift Height: Typically in the range of 2.5 to 3.0 m
Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration
Additional Features:
Ergonomic operator station
Versatile hydraulic system for various attachments

Description¡êothe casing scraper is ideal for the removal of mud, cement, bullets, rust, scale, paraffin, perforation burrs and other obstructions from the inside walls of casing.
Maintaining a clean casing i.D. Is important when operating drilling, fishing, or wire line tools. Likewise, packers, patches, spears, and similar tools require clean surfaces to grip. Obstructions on casing walls will frequently cause these tools to fail or become difficult to operate.
Construction:
Utilizing a simple one-piece mandrel design, the bowen casing scraper is constructed to be rugged, yet simple to operate and maintain. The scraper conditions 50 percent more surface area than any other tool on the market. The full circle blades are so spaced to contact 600¡ã (almost two complete circles) of casing surface at once.
Short and compact, the scraper also incorporates a long taper on the blades for passing through joints without hanging. The scraper works in vertical or rotary operations and may be run on drill pipe or wire line.
Bowen casing scrapers are available to condition pipe ranging from 2-3/8-inch tubing to 13-3/8-inch casing. For more information on the use, operation and specifications of the scraper contact your national oilwell representative.


Wooden cases

TQ Series Hydraulic Casing Tong
Product Description
TQ series of casing power tongs are widely used for making up and breaking out pipes or casinga in diameters of 4~13 3/8 inch. the tong heads are designed "open"type and can freely clamp and escape from the casing.TQ casing power tongs are safe, raliable and easy to handle with mobility.this series of tongs can be connected to computer controlling units and can serve as ideal well mechnical tool for surface operations in oil fields. national invention patent of the tongs has been got. the tongs are designed and manufactured according to API 7K specification for drilling equipment.

TQ series of hydraulic casing tongs are widely used for making-up and breaking-out of casings or pipes. The series of casing tongs are wholly hydraulic driven. The tongs are configured with a large-torque motor. And per form mechanical gearchange. Structure is simple and operation is safe. The casing tongs can be supplied with torque device to perform computer monitoring and managing on pressure, torque and rounds. The casing tong are designed and manufactured according to SY/T5074 standard and API spec 7Kspecification for drilling and well servicing equipment.

Products Drawing
TQ Series Hydraulic Casing Tong
Main Parameters
Casing Power tongs Technical specification:

Model TQ178/16 TQ340/35 TQ356/55
Size Range mm 101.6-178 114.3-340 114.3-356
inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14
Max Pressure Mpa 18 16.6
psi 2610 2400
Working flow L/min 110-160 110-140
gpm 29.3-42.7 29.3-37.3
Air Pressure Mpa 0.5-0.9
psi 72-130
Max. Torque kN.m 16 35 55
ft.lbf 11800 25800 40560
Speed rpm 9-79 3.5-86 4-70
Size mm 1450*760*740 1580*900*880 1770*960*850
in 57*30*29.1 62.2*35.4*34.6 69.7*37.8*33.5
Weight Kg 580 780 1150
lb 1280 1720 2530


TQ series hydraulic casing power tongs technical specification:

Model TQ178/16Y
TQ340/35Y

TQ356/55Y TQ508/70Y TQ610/60Y TQ340/85Y
Size rang mm 101.6-178 114.3-340 114.3-365 244.5*508 244.5-610 114.3*340
inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14 9 5/8 -20 9 5/8-24 4 1/2-13 5/8
Max. Pressure Mpa 18 20 18
psi 2610 2900 2610
Working Flow L/min 110-160 110-170 120-180 110-170
gpm 29.3-42.7 29.3-45.4 32-48 29.3-45.4
Max.Torque kN.m 16 35 55 70 60 85
ft.lbf 11820 25800 40560 51600 44250 62680
Speed rpm 9-79 8-90 4.8-61 4-43.6 5-45 3.2-45
Size mm 1500*760*800 15800*900*860 1770*960*780 2080*1280*760 2330*1310*840 1995*1150*680
inch 59*30*31.4 62.2*35.4*33.8 69.7*37.8*30.7 82*50.4*30 91.7*51.6*33 78.5*45.3*26.8
Weight Kg 560 760 1100 1550 2100 1700
lb 1230 1670 2420 3410 4620 3740

Hydraulic Excavator Submersible Dredge Pump Description:

Hydraulic Excavator Submersible Dredge Pump is a versatile tool. It can be attached to the of an excavator and run using the excavators hydraulics, or it can be suspended from a crane or an A-frame to form a high efficient suction dredger. Design of dredgers comes out to be extremely simplified with possibility to reduce capital cost and have high working depth without any increase in the cost of equipment. Pumps can be provided with cutter heads and thus form a submersible cutter dredger, and could include high pressure water jets to work with highly compacted soil. All of our Submersible Slurry Pumps are suitable to be used for dredging. The solids are pumped mixed with water. There are many applications for our dredge pumps: Dredging of Rivers, Harbors, Dams, Canals, Lakes and Lagoons. In some cases is essential to control the turbidity while dredging.

Features
The Digger Compaction Wheel, designed for easy compaction of dirt back into the trench.
Wheels are designed to deliver optimal performance through quicker compaction more particularly in trenches. They deliver exceptional compaction on the toughest terrains, under the harshest conditions, while lasting longer, using less fuel and minimising operational costs.
Compaction Wheels are designed to reinstate material to its original condition after remedial work has been carried out or pipes have been laid. Apart from different designs of wheels for various applications, there are some interesting designs of pads, some efficient, and some unfortunate. The ideal design are pads that are tapered from the flat surface to the back where they are welded to the wheel or roller so that they do not the compacted material as they roll over the surface.
Packing
1. We pack the products by simple pallet or case which is seaworthy.
2. Fast delivery time: 5-7 days for small quantity, and 20-30 days for container quantity.
3. We have a team specialized in packing and loading container, they have rich experience, and can load the max quantity products, which can help customer save the ocean freight.

excavator attachments such as: buckets, ripper, & arm, grapple, quick coupler, hydraulic shear, hydraulic clamp, hydraulic vibration hammer, hydraulic crusher, milling machine, screener, strength boom & arm, tamping bucket, bulldozer shovel, bulldozer push beam, bulldozer ripper, loader bucket, loader timer grapple, show shovel etc. We have many kinds of top quality attachments products to fit all type of excavators, bulldozers and loaders. Also, we have our own import/export company, our products are exported to all over the world, based on our quality and the best after-service.