Garnet Sand

CHEMICAL COMPOSITION

Fe2O3: 25-31%

Al2O3:17-21%

MgO:5-6%

SiO2:34-40%

CaO:5.0-10.0%

MnO:0-1.0%



PHYSICAL PROPERTIES

Specific Gravity:3.8-4.1g/cm3

Bulk Density:1.8-1.9 g/cm3

Hardness (Mohs):7.5-8.0

Melting point:1300 C

Grain shape:Sharp, Angular

Chloride content 25ppm

Acid solubility(HCL) 1%

Conductivity 25 ms/m

Toxic substances:None


AVAILABLE SIZES
10-20mesh 20-40mesh 30-60mesh 80mesh

PACKING
25kgs pvc bags 1mt big bag or 1mt big bag

Pink garnet sand 10-20mesh
Chemical Composition
SiO2:34-40%
Fe2O3:25-31%
Al2O3:17-21%
MgO:5-6%
MnO

Dear Sir / Madam,

We are producers and exporters of Garnet Sand

30/60 Mesh Beach Garnet Sand Blasting Application.
50/80 Mesh Beach Garnet Sand Water Jet Cutting Application.
80 Mesh Beach Garnet Sand Water Jet Cutting Application.
100 Mesh Beach Garnet Sand Water Jet Cutting Application.
120 Mesh Beach Garnet Sand Lapping Application.

Thanks & Best Regards,
Kuladeep

Garnet sand is a good abrasive, and a common replacement for silica sand in sand blasting. The garnet, as it is mined and collected, is crushed to finer grains; all pieces which are larger than 60 mesh (250 micrometers) are normally used for sand blasting.

We KRISHNA ENTERPRISES Are Having Manufactring Facilites of Garnet Abrasives in Rajasthan With Owing to the affluent knowledge, we are capable to provide Garnet Abrasive Sand. Moreover, the presented series of products is properly checked on varied industry standards to make sure the longer life.

Garnet sand is a good abrasive and a common replacement for silica sand in sand blasting. Alluvial garnet grains which are rounder are more suitable for such blasting treatments. Mixed with very high pressure water, garnet is used to cut steel and other materials in water jets. For water jet cutting, garnet extracted from hard rock is suitable since it is more angular in form, therefore more efficient in cutting.

Garnet Abrasive Sand Available Size:
Mesh 20/40
Mesh 20/60
Mesh 30/60
Mesh 80
Mesh 10/20
And Many more Sizes
Garnet Abrasive Sand is a group of iron aluminum silicate homogeneous minerals having similar properties. Non-hygroscopic, sharp angular shape, inert, slightly magnetic, not soluble in water, translucent, friable to tough, and contains no free chemicals. All oxides and dioxides are combined chemically as follows: Fe2O3Al2(SiO4)3. The iron and aluminum are partially replaceable by calcium, magnesium and manganese.


Specifications :


Fracture

Usually Brittle

Color

Red to Pink

Bulk Density (lbs./ft3)

150

Melting Point (C)

1250 to 1315

Fusion Point (high Fe) (�°C)

1200

Strength

Friable to Tough

Mineral Conductivity (volts)

18,000

Mohs Hardness @20C

~ 8 to 9

Category

Neosilicates

Sand Blasting Grade :
20/40, 20/60 and 30/60 Fine grains of Abrasive garnet is recommended for blast cleaning applications. Industrial Mineral is a natural Almandine known for its natural hardness, resilience and lends itself to high performance during blasting. Its intrinsic physical and chemical uniformity ensures superior performance. Garnet is steadily superseding other blasting media because it is environment friendly and reusable

Material: Abrasive Garnet Sand
Size: 0.25 - 2.5 MM
Color: Reddish
Specific Gravity: 4.0 - 4.1

Packaging Size: 25 Kg / 50 Kg / 1 Ton
Packaging Type: HDPE Woven Gunny Bags
Transport Type: Land / Sea / Air Transport

Sandblasting with Abrasive Garnet Sand - During the surface preparation process, Abrasive garnet is blasted onto the surface of the steel using high-pressure compressed air.
It can be found in high-quality coated and bonded abrasives such as abrasive papers, clothing, and wheels.
Abrasive garnet sand is a mineral-free, iron-free substance with a wide range of applications. High-pressure water jet cutting is its primary application as abrasive sand.
Garnet sand is a good abrasive and a common sandblasting replacement for silica sand. Rounder Garnet Sand is better suited for such blasting treatments.

Water Jet Cutting

Garnet Sand Abrasive from India . We are one of the largest manufacturer and exporter of Garnet sand from India, We can supply all the grades from Mundra and Vizag port.

Garnet Sand Abrasive from India . We are one of the largest manufacturer and exporter of Garnet sand from India, We can supply all the grades from Mundra and Vizag port.