Boring Holder

The metering fuel nozzle LLY-25 series is a combination of horizontal screw-wing flow meter and fuel gun. It is a meter instrument used to measure the volume flow rate of liquid (petrol, diesel, engine oil, hydraulic oil, etc.) flowing through the pipeline. In virtue of reliable performance, this metering fuel nozzle LLY-25 is suitable for filling petrol and other light oil products.
Metering fuel nozzle LLY-25 is used for on-farm accounting, both in stationary installations and in ground-based refueling and pumping facilities. It is used as a pistol for refueling in small settlements at gas stations of a local scale.

Technical Parameter
�¢??Conditional pass �¢?? 25 mm
�¢??Working pressure �¢?? 1 MPa
�¢??Permissible error: �?�±1%
�¢??Min.flow �¢?? 25 L/min
�¢??Max flow �¢?? 120 L/min
�¢??Division price �¢?? 1 L
�¢??Max. set dose �¢?? 9999 L
�¢??Operating temperature from -20 to +50

Working Principle
Having roller pointers for a one-time count of the amount of liquid, the gun with a counter serves to count the amount of fuel that has passed through it. Roller disposable pointer crane LLY has a device for setting the readings to zero. Accounting for the amount of liquid that has passed through the counter gun is based on counting the number of revolutions of the drive screw inside the fuel dispenser gun. The flow of the measured fuel, entering the meter and passing through the volume meter, loses part of the pressure to create a torque that causes the screws to rotate. The measurement of the amount of liquid by a pistol with a counter occurs due to the periodic cutting off of certain volumes of it contained in the cavities between the cylindrical bores of the holder and the screws. This device is a combination of the simplest fuel dispenser gun and fuel meter, the accuracy and performance of which are inferior to industrial designs. Pressing the lever opens the valve, fuel flows through the gun. When the faucet lever is released, the valve closes under the action of a spring, blocking the flow of liquid. The adjusting screw is intended for equipment calibration. The drain pipe of the dispensing gun with a counter is used to direct the liquid into the container when refueling.

Gamut hydraulic copy turning face copying & copy boring. Gamut lathe tracers are made by graded casting and have been robustly constructed to take maximum cut with hardened tool post and very sensitive and precise copy-valve to render trouble free longer service. Gamut tracer can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good machining condition.

Features
•in-built lubrication system for tracing slide.
•6-station servo-actuated turret for multicut operation (optional item at extra cost).
•hardened tool post with quick change tool holder.
•finish cut system from 0-1.5 mm. Tool get advance automatically in finish cut mode.
•forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost.
•master carrier for round master and flat template holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements.
•power pack having dual delivery pump, oil level indicator, special isolator valve for pressure gauge and filters.


1 set, 250kg, 1500 x 600 x 350

Model No./A204
Size/22 T=2.7
Product Name/For Makino of Power Feed Contact
Position/Lower
Machine Model /EE/EH/EC/U/EU/SP/W/DUO/
U3/U6
Original P/No. /4EC80A708=1

We are one of biggest Distributor of wire EDM consumables and spare parts in China . Our company start our business since 2006 and We have full experienced staff to help you with your part and machine . Target of us is supply customer excellent quality products with attra ctive prices. Our products get high reputation form our customer , below is the products line of us :
1. pipe guide , electrodes tube , chuck , rubber seal ,connector , filter and other parts For EEDM drilling machine
2. tapping electrodes , copper tungsten rod , holder for spark machine
3. Guide , nozzle , power feed contact /current supply , Isolation plate , axle, block , feed roller ,pinch roller ,gear , screw,Urethane roller , bearing , holder , cutter , spring , cable ,belt ,filter, resin , brass wire and other spare parts for Sodick , Mitsubishi , Charmilles , Makino , Chmer , brother , ONA , seibu , accutex, Agie , fanuc, Hitachi, japax ,ARD,Excetek,SPM ,SSG,Maxsee ,Jiansheng, Joemars EDM wire cut machine
4. Guide pulley , nozzle , nozzle block , power feed contact , Molybdenum wire , motor , roller , shaft , brass base , bearing for chinese electroerosion machines /high speed wire cut machine
5. Jig tool , vise , Jig holder
6. End mill , drilling , milling cutter ,inserts, boring head

If you are interested in our products , please don't hesitate contact me, I will let you know immediately.

Thanks & Best Regards,
Jnee

Zhanyu Moulds & Hardware Accessories Co. Ltd.

Model No./A205
Size/50 T=21.5
Product Name/For Makino of Power Feed Contact
Position/Upper
Machine Model /EE/EH/EC/U/EU/SP/W/DUO/
U3/U6
Original P/No. /15EC80C401

We are one of biggest Distributor of wire EDM consumables and spare parts in China . Our company start our business since 2006 and We have full experienced staff to help you with your part and machine . Target of us is supply customer excellent quality products with attractive prices. Our products get high reputation form our customer , below is the products line of us :
1. pipe guide , electrodes tube , chuck , rubber seal ,connector , filter and other parts For EEDM drilling machine
2. tapping electrodes , copper tungsten rod , holder for spark machine
3. Guide , nozzle , power feed contact /current supply , Isolation plate , axle, block , feed roller ,pinch roller ,gear , screw,Urethane roller , bearing , holder , cutter , spring , cable ,belt ,filter, resin , brass wire and other spare parts for Sodick , Mitsubishi , Charmilles , Makino , Chmer , brother , ONA , seibu , accutex, Agie , fanuc, Hitachi, japax ,ARD,Excetek,SPM ,SSG,Maxsee ,Jiansheng, Joemars EDM wire cut machine
4. Guide pulley , nozzle , nozzle block , power feed contact , Molybdenum wire , motor , roller , shaft , brass base , bearing for chinese electroerosion machines /high speed wire cut machine
5. Jig tool , vise , Jig holder
6. End mill , drilling , milling cutter ,inserts, boring head

If you are interested in our products , please don't hesitate contact me, I will let you know immediately.

Thanks & Best Regards,
Jnee

Zhanyu Moulds & Hardware Accessories Co. Ltd.

Model No./A205
Size/50 T=21.5
Product Name/For Makino of Power Feed Contact
Position/Upper
&
Lower
Machine Model /EE/EH/EC/U/EU/SP/W/DUO/
U3/U6
Original P/No. /15EC80C401-1

We are one of biggest Distributor of wire EDM consumables and spare parts in China . Our company start our business since 2006 and We have full experienced staff to help you with your part and machine . Target of us is supply customer excellent quality products with attractive prices. Our products get high reputation form our customer , below is the products line of us :
1. pipe guide , electrodes tube , chuck , rubber seal ,connector , filter and other parts For EEDM drilling machine
2. tapping electrodes , copper tungsten rod , holder for spark machine
3. Guide , nozzle , power feed contact /current supply , Isolation plate , axle, block , feed roller ,pinch roller ,gear , screw,Urethane roller , bearing , holder , cutter , spring , cable ,belt ,filter, resin , brass wire and other spare parts for Sodick , Mitsubishi , Charmilles , Makino , Chmer , brother , ONA , seibu , accutex, Agie , fanuc, Hitachi, japax ,ARD,Excetek,SPM ,SSG,Maxsee ,Jiansheng, Joemars EDM wire cut machine
4. Guide pulley , nozzle , nozzle block , power feed contact , Molybdenum wire , motor , roller , shaft , brass base , bearing for chinese electroerosion machines /high speed wire cut machine
5. Jig tool , vise , Jig holder
6. End mill , drilling , milling cutter ,inserts, boring head

If you are interested in our products , please don't hesitate contact me, I will let you know immediately.

Thanks & Best Regards,
Jnee

Zhanyu Moulds & Hardware Accessories Co. Ltd.