Boiling Pan No. G-1

Boiling Pan No. G-1A

Size depended upon the capacity required
121.92 x 60.96 cm to 243.84 x 121.92 cm etc.
Raw Material Used: Mild Steel Plates.
Universal Stirrer Device Manually as well as Power
Operated.
Hemispherical in shape.
Made from polished mild steel plates.
Leak proof welded.
Used for Boiling of Soap Raw material.
Used for Laundry Soap, Toilet Soap manufacturing &
other applicable industries

Ethanol alcohol distillation column
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.
 Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol .
It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements.
The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements.
The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.

Distillation column For Ethanol Alcohol Plant
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.
    a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .
 It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.

Full HD 1ystem Main 1080p built-in 80mm/58mm Thermal Receipt 14 inch one in all POS machine with Android/Linux /Win sisplay.

Specification
item
value
Certification
FCC, ce, RoHS
Products Status
Stock
Type
Android/Linux POS Device with Printer
Style
Desktop
Use
POS device and Cash Register
Interface Type
58mm/80mm Built-in Thermal Receipt Printer
Brand Name
GOOD PARTNER
Model Number
HDD-780
Place of Origin
China
Warranty(Year)
1-year
After-sales Service
Return and Replacement, Call Center and on-line Technical Support, Onsite Training and Inspection
Place of Origin
Jiangsu China
Operation System
Linux/Android/Windows
Touch Screen Type
Capacitive Screen
Hard Disk Capacity
8G EMMC/ 32GB/64 GB SSD
CPU
RK3288 Quado Cre 1.8GHz/Intel J1800/ J1900 1.8GHz
Display
14.1 inch or 15 inch
Memory:
2GB RAM
Ethernet
100M/1000M RJ 45
WIFI
802.11 B/g/n
Certification
CE/CCC/ROHS

Full HD 1ystem Main 1080p built-in 80mm/58mm Thermal Receipt 14 inch one in all POS machine with Android/Linux /Win sisplay.

Specification
item
value
Certification
FCC, ce, RoHS
Products Status
Stock
Type
Android/Linux POS Device with Printer
Style
Desktop
Use
POS device and Cash Register
Interface Type
58mm/80mm Built-in Thermal Receipt Printer
Brand Name
GOOD PARTNER
Model Number
HDD-780
Place of Origin
China
Warranty(Year)
1-year
After-sales Service
Return and Replacement, Call Center and on-line Technical Support, Onsite Training and Inspection
Place of Origin
Jiangsu China
Operation System
Linux/Android/Windows
Touch Screen Type
Capacitive Screen
Hard Disk Capacity
8G EMMC/ 32GB/64 GB SSD
CPU
RK3288 Quado Cre 1.8GHz/Intel J1800/ J1900 1.8GHz
Display
14.1 inch or 15 inch
Memory:
2GB RAM
Ethernet
100M/1000M RJ 45
WIFI
802.11 B/g/n
Certification
CE/CCC/ROHS

Full HD 1ystem Main 1080p built-in 80mm/58mm Thermal Receipt 14 inch one in all POS machine with Android/Linux /Win sisplay.

Specification
item
value
Certification
FCC, ce, RoHS
Products Status
Stock
Type
Android/Linux POS Device with Printer
Style
Desktop
Use
POS device and Cash Register
Interface Type
58mm/80mm Built-in Thermal Receipt Printer
Brand Name
GOOD PARTNER
Model Number
HDD-780
Place of Origin
China
Warranty(Year)
1-year
After-sales Service
Return and Replacement, Call Center and on-line Technical Support, Onsite Training and Inspection
Place of Origin
Jiangsu China
Operation System
Linux/Android/Windows
Touch Screen Type
Capacitive Screen
Hard Disk Capacity
8G EMMC/ 32GB/64 GB SSD
CPU
RK3288 Quado Cre 1.8GHz/Intel J1800/ J1900 1.8GHz
Display
14.1 inch or 15 inch
Memory:
2GB RAM
Ethernet
100M/1000M RJ 45
WIFI
802.11 B/g/n
Certification
CE/CCC/ROHS

V3 Borewell Submersible Pumpset

Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5

V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5