A179 Carbon Steel Round Bar

* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.

Material : API5L

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : �±0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Material

* ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022)

* DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4)

* BS(040A04,095M15,045M10,080A40,045M10,080M50)

* Thickness : 0.1mm-300mm or as required

* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

* Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance

+ 0.1mm

* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

* Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.

* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A53

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A214

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A106Gr. B

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application :

* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing

* Waterproof paper, and steel strip packed.

* Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar

Size : 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size : 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel
pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel
manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

* 201 stainless steel is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 201

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar
Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

* 316L Stainless steel round bar is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 316L

Specifications : Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar :

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar : Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

904L tainless steel round bar (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

904L

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment