Standard Viscosity Grade Bitumen (AC-Grades), in which the Viscosity of the standard bitumen (asphalt) is measured at 60 C (140 F). RTFOT Viscosity Grade Bitumen (AR-Grades), in which the Viscosity of bitumen (asphalt) is measured at 60 C (140 F) after the roll on thin film oven test.
Viscosity grade bitumen have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. In the Viscosity Graded Bitumen specifications further special emphasizes is placed on the Bitumen ductility.
Supplier of Bitumen AC10 from Turkey and Dubai-UAE
Application of Bitumen AC10
Main Applications:
Hot Mix Asphalt (HMA) Production
Used as a binder in asphalt concrete for road surfaces.
Ideal for base, binder, and surface courses in flexible pavements.
Road Construction & Rehabilitation
Suitable for urban and rural roads, highways, and airport runways.
Used in both new road construction and overlays.
Pavement Maintenance
Used in patching potholes and repairing cracked or aged pavements.
Applied in leveling courses before final overlays.
Surface Treatment and Seal Coats
Employed in chip seal applications and fog seals.
Improves waterproofing and extends pavement life.
Waterproofing and Damp Proofing
Used in foundations, roofs, and other waterproofing structures where moderate viscosity bitumen is required.
Premix Carpet & Bituminous Macadam Layers
Suitable for light- to medium-duty roads and service lanes.
Supplier Of Viscosity Grade Bitumen 30 From Turkey and Dubai-UAE
Packing of Bitumen VG 30
Bitumen VG 10 is typically packed and transported in a variety of ways Here are some common packing options for Bitumen VG 30:
180kg New Steel Drum: Loading 110 Drum in 20 ft
375Kg Bitubag: Loading 24 MT in 20 ft Container
Bulk in vessel: Loading 2000 to 20,000 MT in Bitumen Carrier
Bulk in Flexi Bag: Loading 20 MT in Bitumen Felexi Bag
Bulk in Tunker: Loading 25 MT in Truk Tanker
Viscosity Grade Bitumen 10
Viscosity Grade Bitumen 10 Applications
Viscosity Grade Bitumen 10 (VG-10) is primarily used in a variety of applications due to its lower viscosity and relatively soft consistency. Here are some of its common applications:
Surface Dressing:
VG-10 is used for surface dressing of roads, which involves spraying the bitumen over the road surface followed by the application of aggregates. This process helps in providing a protective layer and restoring the surface texture.
Bitumen Emulsions:
VG-10 is suitable for manufacturing bitumen emulsions, which are used for road maintenance and construction. Emulsions allow for the bitumen to be used in a more fluid form without the need for heating, making it ideal for cold or damp conditions.
Seal Coats:
VG-10 is used in seal coat applications where it acts as a protective layer on existing asphalt pavements. Seal coating helps in preventing water infiltration, reducing oxidation, and improving the durability of the road.
Tack Coats:
VG-10 is applied as a tack coat, which is a thin layer of bitumen used to create a bond between the existing pavement surface and a new overlay. This ensures proper adhesion and prevents slippage between layers.
Paving in Cold Climates:
Due to its lower viscosity, VG-10 is well-suited for paving in regions with colder climates. It remains workable and flexible at lower temperatures, which helps in achieving a better compaction and smooth surface finish.
Bituminous Macadam:
VG-10 is used in bituminous macadam, a type of road construction material composed of bitumen and aggregates. This is typically used for the base or binder course in road construction.
Modified Bitumen:
VG-10 can be modified with polymers or other additives to enhance its properties for specific applications such as high-stress areas or regions with extreme weather conditions.
Cutback Bitumen:
VG-10 is also used in the production of cutback bitumen, which involves dissolving bitumen in a solvent to reduce its viscosity for ease of application at lower temperatures.
To grade the bitumen-based on viscosity BIS revised IS-73-1992 specifications (Viscosity at 60 C) and as such there are four grades VG-10, VG-20, VG-30 & VG-40. A few qualification tests like specific gravity, water content, ductility, loss on heating & fares breaking point were removed from IS:73-1992 as these tests do not have any relationship with the performance of the product.
Viscosity Grade Bitumen is widely used in spraying applications such as surface-dressing and paving in very cold climates. It is also used to manufacture bitumen emulsion and modified bitumen products.
Grades: PG 46-34 to PG 64-22 (AASHTO M320)
Adaptable to climate, with polymer modifiers as needed
Applications: Busy roads, high-load, and extreme temperature conditions
Packing & Transport Options
Packing Formats
Bulk (via tankers or ships)
Drums (150â??200 kg, suitable for long-distance)
Poly Bags (300â??1000 kg): safer, solid state transport, recyclable
IBC Containers: 1000 L rigid containers for emulsions
Regional Standards Covered
ASTM / AASHTO
European (EN)
Indian (VG)
Australian
Chinese
South African, Malaysian, British
Note: The prices provided are for reference only and may be subject to change.
Penetration Grades: 40/50, 60/70, 85/100, etc. (per ASTM, EN, Chinese standards)
Viscosity Grades (VG): VG-10, VG-20, VG-30, VG-40 (India/Australia)
Properties: Defined by viscosity, penetration, softening point, ductility, flash point
Packing & Transport Options:
Packing Formats
Bulk (via tankers or ships)
Drums (150 - 200 kg, suitable for long-distance)
Poly Bags (300 - 1000 kg): safer, solid state transport, recyclable
IBC Containers: 1000 L rigid containers for emulsions
Regional Standards Covered
ASTM / AASHTO
European (EN)
Indian (VG)
Australian
Chinese
South African, Malaysian, British
Note: The prices provided are for reference only and may be subject to change.
Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures.
Key Features:
Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction.
Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation.
Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces.
Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads.
Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure.
Applications:
Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways.
Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads.
Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots.
Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture.
Specifications:
Penetration at 25 C: 60-70 dmm
Softening Point: 49-56 C
Flash Point: Minimum 232 C
Ductility at 25 C: Minimum 100 cm
Solubility in Trichloroethylene: Minimum 99.0%
Specific Gravity: 1.01-1.06
Packaging: Available in drums, bulk containers, or as per customer requirements.
Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications.
Why Choose Bitumen Grade 60/70?
Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability.
Versatile Applications: Suitable for a wide range of paving and waterproofing projects.
High Quality: Manufactured under stringent quality control measures to meet global standards.
