Ethanol alcohol distillation column
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.
 Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol .
It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, Â ethanol discharge in waste 0.05%, better than international standard requirements.
The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements.
The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.
    a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .
 It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.
Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Product Description
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system.2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system. 2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake
This range of Soap Cutting Machineries can be availed in single/double/three table based design choice and mechanical/manual controlling mode based specifications. These equipment comprise of standard components like PLC controller, servo drive, servo motor, electrical parts and angle encoder. All the contact accessories of these Soap Cutting Machineries are made of 304 grade stainless steel to maintain required hygiene. Belt conveyor type motor of these equipment requires 0.55 kW power to function. Offered in three phase design, these systems have long working life. Standard of these equipment has been verified on the basis of their service life, production method and user friendliness.
Raw Material Used: Cast Iron, Mild Steel & Stainless Steel
Hand operated
Cuts soap slabs into bars and cakes
Gives fine accurate cuts
Simple in operation and use
Easy to maintain
Cutting operation performed by wire
Bearing & Double Gearing System for hassle free feeding the soap toward the wire cutting frames
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion
The cut is clean and sharp
For smooth operation the gear arrangement is provided
Sculpting Soap Perfection: The Foot Operated Artisanal Stamping Marvel
Introducing the Foot Operated Soap Stamping Machine: Revolutionizing soap production through innovative design and precision engineering. This remarkable machine combines cutting-edge features, adaptable technical specifications, and exceptional benefits, all housed within a standard-sized framework.
Features: Crafted with a robust cast iron body, the machine boasts durability and longevity. The critical components, including the die mold, are expertly fashioned from both mild steel and stainless steel, ensuring reliability and resistance to corrosion.
The ergonomic design takes center stage with an adjustable seat, catering to user comfort during prolonged stamping sessions. The machine's adaptable ram and weight system guarantee seamless stamping, allowing for precision adjustments. This unique system also empowers users to fine-tune the pressure exerted by effortlessly modifying the position of the dead weight, enhancing control and flexibility.
Technical Specifications:
Size: Standard
Body Material: Cast Iron
Die Mold Materials: Mild Steel and Stainless Steel
Operation: Foot Operated
Ergonomics: Adjustable Seat
Pressure Control: Adjustable Ram and Weight
Soap Ejection: Ejector Pin-equipped Die Mold
Use: Printing Soap Cakes & Bars
Uses: The Foot Operated Soap Stamping Machine finds its place at the heart of soap production facilities, streamlining the process of imprinting intricate designs onto soap cakes and bars. Its versatile capabilities extend to a wide range of soap types and sizes, offering manufacturers the ability to create captivating and customized products that stand out in a competitive market.
Benefits:
Precision and Consistency: The machine's adjustable settings enable meticulous control, ensuring uniform and consistent imprints on each soap.
Enhanced Ergonomics: The ergonomic seat promotes operator comfort, reducing fatigue during prolonged usage and increasing overall productivity.
Flexibility in Pressure: With the capacity to adjust pressure levels, soap manufacturers can tailor the stamping process to suit different soap compositions and designs.
Effortless Operation: The foot-operated mechanism simplifies usage, allowing operators to focus on precise positioning without the need for constant manual adjustments.
Efficient Ejection: The incorporated ejector pin facilitates the seamless removal of stamped soaps from the die mold, streamlining the workflow.
Durability and Hygiene: The choice of cast iron, mild steel, and stainless steel materials ensures longevity, resilience against wear, and compliance with hygiene standards.