Labfusion Innovations LLP

Clean air equipment, such as fume hoods, air purifiers, and HEPA filters, ensures a safe and contaminant-free environment in labs. These devices help remove harmful particles, gases, and fumes, protecting both the samples and the researchers.

Tissue Floatation Bath is a simple, economical, designed to lay section of Histological samples. TFB-177 provides high thermal conductivity rates and outstanding scratches resistance due to its special coating overheating protection system along with a stand- by mode.

Dental equipment includes tools used for oral care and dental procedures. Examples are dental chairs, scalers, drills, X-ray machines, and sterilization units. These tools help diagnose, treat, and prevent dental issues, ensuring proper oral health and hygiene.

Dental equipment includes tools used for oral care and dental procedures. Examples are dental chairs, scalers, drills, X-ray machines, and sterilization units. These tools help diagnose, treat, and prevent dental issues, ensuring proper oral health and hygiene.

Abbes Refractometer

The body of the instrument is fixed, with a leaning of 60. Correct Refractive Index and Sugar Percentage can be read directly in the field. It consists of Abbeâ??s Double Prisms with the Thermostat, Compensator, Telescope Mirror, Limb, Graduated Sector, Reading Magnifier and Radical Arm which carriers a Vernier. Abbe's Double prisms leave a narrow space (about 0.1 mm) between the adjoining faces of the prisms. Compensator consists of the Amici Prisms which serve for reading the line of Ach. Separation

This model depicts the life cycle of Taenia saginata, commonly known as the beef tapeworm. Mounted on a base, it is numbered with an English Key Card for easy identification of components. The approximate dimensions are 45 x 40 x 4 cm, with a weight of approximately 1.7 kg. This model provides a visual representation of the life cycle stages of Taenia saginata.

A single model depicting an enlarged, flattened, ribbon-like tapeworm scolex with four suckers, including the presence of the head (Scolex), neck, and body (strobila). Mounted on a base for stability and accompanied by a key card for reference.

This 3D model of Hydra, enlarged 25 times, presents the anatomy of Hydra in longitudinal section. Additionally, a supplementary model on the left side depicts the wall of the body in the region of the stomach and intestine. The model is mounted on a base and is supplied with an English Key Card for reference.

Watchmakers Eye Glass LO419


Diameter 25 mm mounted in plastic eyegrip frame

Magnification

LO419     x 25

LO419    x 3

LO419    x 35

LO419    x 4

Hollow Glass Prism

Equilateral, cemented, with hole and stopper.

LO-691/1     Side 38 mm

LO-691/2      Side 50 mm

Explore a comprehensive series of models depicting the life cycle of honey bee insects, showcasing various developmental stages from inception to maturity. Each model is meticulously crafted and mounted for clarity and educational purposes. Accompanied by an English Key Card for easy reference and understanding.

A collection of models illustrating the life cycle of a house fly, depicting various stages from its inception to full development. Mounted on a base and accompanied by an English key card for reference.

Electric Hospital Bed With Hand Remote Control

Main features
-Bed Frame Electrophoresis and powder coating
-Bed platform MS perforated platform with ventilation hole, molded
- Motor Quiet and robust electric actuators provide reliable operation
-Hand remote controller of all electrically operated functions and movements
- Handrails Collapsible aluminum railing with 6 bars
- Head and Footboard ABS material, detachable
-Castors: Caster diameter of 125mm with diagonal locking
-Bumper castors on 4 corners of the bed
-Auto counter function Auto counter to provide the patient from slid foot end

Technical parameters
Size 2130*970*500-750mm
Lying surface: 1880*830mm
High-Low: 500-750mm
Back section adjustable 0 to 75
Knee section adjustable 0 to 40
Safe working load 175kg

Spherical Mirror
Unmounted spherical mirrors, optically worked, silvered back with protective coating.
276  Concave Mirror
276  Convex Mirror


Diameter  50mm   Diameter  60mm
Focal  Length     Focal  Length
 




1
100mm
5
100mm


2
150mm
6
150mm


3
200mm
7
200mm


4
300mm
8
300mm



 

Diameter 75mm
Focal Length
9  100mm
10    150mm
11    200mm
12    300mm

Specifications.

Body made of ABS plastic injection moulded and is shock proof.
Microprocessor based, programmable, Electrophoresis power supply.
Variable voltage 0-300V
Varible current 0-500mA.
Digital timer 9 hr. 99 minutes programmable
Digital display of voltage and current thru�  2line 22 character LCD display.
For single unit use at a time.
Two work on 220 volts 50 Hz A.C.
Supply in complete with cord & plug. Instruction manual. Packed in corrugated box.

Polarimeter LO348
A monochromatic yellow LED light source fitted inside a cylindrical housing operated on 10V DC The simplified construction makes it easy to study the topic in any laboratory A 10cm long specimen tube is used for observing the concentration and the angle of rotation of different solutions The outer edge of the lid has a pointer which coincides with the scale printed on the outer surface of the cylindrical body On rotating the lid containing second polarizer the position for extinction can be found for different solution concentration on the lid of the apparatus

Motorized Internal Calibration
Date, Time, Temperature, ID settings.
Statistic Weighing
Animal Weighing function
Alarm â?? Check Weighing Measurement
A built in under hook for below weighing
Easy to read Backlight LCD Display
Density measurement function
Density measurement kit (for solid & liquid) - Optional
Standard RS 232 C Interface
Percentage (%) Weighing
Electro Magnetic Force Compensation Technology
MAB250 Dual range Option available
Tare range upto max. Capacity
Multiple Weighing Units
Counting Weighing mode
Super large LCD display, white background light make the displayed data very clear

Technical Specifications



Brand

Wensar


Model Name/Number

MAB-220 MAB250


Size

(LxWxH) mm 475 x 315 x 485


Capacity

220 g 50g


Pan Size

80mm


Display Type

5 inch Touch Screen


Readability

0.0001g and 0.00001


Linearity

+- 0.4 mg and 0.04


Response Time

4-6 S


Interface

RS232C


Class

Class l


Repeatability

( +- ) 0.2 mg


Min. (Capacity)

10 mg and 1mg


Verification Scale Intervals (e)

1 mg

High speed, high-capacity bench top, Medical/ Laboratory Centrifuge Machine, Microprocessor based

Heavy duty C.R.C. construction finished with powder coating.

Noiseless Operation.
Programmable RPM selection 500 to 6000 in intervals of 100 rpm.
Digital timer 0-120 minutes.
The machine is fitted with a well-balanced brushless motor with an electronic drive.
The Electronic lid lock does not allow the lid to be opened when the machine is running.
The motor is fitted with rpm sensor to monitor the rpm of the machine. The controller monitors the rpm of the machine and does not allow the motor to overspeed.
The Machine has safety features for the detection of Imbalance and stops automatically.
Warranty 3 years from the date of installation.
4 lines, 20 characters Jumbo LCD Display for set time, run time, set and run RPM, RCF.
50 programs can be stored in memory.
Programmable Acceleration Time: 40-200 Sec and Deceleration Time: 40-200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops.
Dynamic brake (automatic) .
Fast spin option.
Delta Industrial Automation VFD and SMPS (Make in India).
The machine can run fixed angle rotors, swingout rotors, well plate rotors & microtube rotors.
Stainless Steel 304-grade rust-free centrifugal bowl for extra protection and easy cleanin
User-friendly control panel.

Forced convection digitally controlled hot air ovens suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone

Features
Forced convection system ensures good mixing strong dispersion and maintains higher temperature uniformity inside the chamber
Most ideal for various experiments in microbiology cell cultivation of animals and plants and food for various laboratories industries R D labs etc
Synthetic door gasket made of neoprene on the doublewalled door
Useroriented design of shelves makes you adjust each space of shelves without difficulty
Adjustable two ventilation slides control inner airvapor circulation
Beaded heating elements are placed in ribs at bottom and sides for uniform heat distribution

Constructional Features
Outer body made of CRC Sheet duly powder coated
Inner chamber and adjustable trays are made of Stainless Steel SS304 grade
Gap between the inner chamber and the outer wall is filled with highgrade mineral wool for minimal heat dissipation
Bigger sized units mounted on caster wheels for easy portability
Door fitted with heavyduty hinges and door handle ensuring there are no leakages through the door gasket
Temperature Range 50C to 250C
Temperature Accuracy 1C
Temp Controller Microprocessor Based Digital Temperature IndicatorCumController with LED OR LCD Display OR TFT Touch Screen Display Controller Option
Type Available with forced convection system
Regulator Solidstate electronic relay with protective heat sink
Safety Device Overtemperature limiter switch prevents overheating
To work on 220230V AV 5060 Hz supply

Magnetic Stirrer
Digital LCD Display
Last Measurement in Memory
Heating Stirring can proceed Simultaneously
Bushless Motor for Low Noise
Anti scratch and Corrosion Resistance
Ceramic Plate Surface
ABS Cabinet

Brand Labtical
Model NameNumber MS5LH
Type Magnetic Stirrer
Speed range 1002000rpm
Maximum mixing capacity 5000 ml
Temp Range Accuracy 300C Accuracy 1C
Temperature Sensor PT100
Time range 099h99min
Top Plat Size 168 x 168mm
Display LCD
Motor Type Bushless Motor
Operating Mode Temperature Speed Timing Memory last data
Power 500W
Power Supply AC 220V 5060Hz
Packing Dimension 335 x 235 x17cm
Weight 25kg

Laboratory Glassware Beaker is one of the most common pieces of glassware used in a laboratory. It is majorly used to hold, mix, aggregate measurement, pour, or in heating of reagents.Two types of Glass Beakers used in the labs are Tall-Form Beaker and Low-Form Beaker. Further, depending on their application, they can either be Graduated/ Non-graduated, with/ without spout.

Volumetric glassware includes precision instruments like flasks, pipettes, and burettes, used for accurate liquid measurement and transfer in laboratories. Essential for tasks requiring exact volumes, they ensure reliability in experiments, titrations, and chemical analysis.

Separating funnels are lab tools for separating immiscible liquids based on density. They have a conical body and a stopcock for controlled liquid release, ideal for extractions and phase separation.

Adaptors connect lab glassware, ensuring compatibility, while stopcocks regulate liquid or gas flow, providing precision in experiments. Both are vital for flexible and controlled setups.

Glass assemblies are combinations of glass components designed for specific laboratory setups, such as distillation or filtration. They ensure precision, durability, and compatibility in experiments requiring controlled environments.

Educational Equipment

Educational Equipment

Educational Equipment

Educational Equipment

Refrigerated Brushless centrifuge with head 1.5 ml.Microprocessor based 128x64 Graphic lcd display, Temp -20 to ambient, Lid lock, Drive controlled, RPM 16000, Timer in built 99: 99, Heavy body vibration free.

Max. Speed : 20000 r.p.m.
* Max. RCF : 23000xg
* Timer : 0-99 min.
* Motor : Brushless Motor
* Temp. Range : From room temperature- to Minus 20�°C
* Temp. Accuracy : �±2�°C
* Power : AC 220V 50 Hz 20A
* Weight : 55� kg. approx.
* Dimension : L-25â?? x W-20â?? x H-14â?? approx

Special Feature :
* Low Sound
*Fitted with vacuum legs for better griping on table.
* Vibration free
* C.F.C. Free refrigeration
* Kirloskar compressor

High speed, high-capacity bench top, Medical/ Laboratory Centrifuge Machine, Microprocessor based
 Heavy duty C.R.C. construction finished with powder coating.
Noiseless Operation.
Programmable RPM selection 500 to 6000 in intervals of 100 rpm.
Digital timer 0-120 minutes.
The machine is fitted with a well-balanced brushless motor with an electronic drive.
The Electronic lid lock does not allow the lid to be opened when the machine is running.
The motor is fitted with rpm sensor to monitor the rpm of the machine. The controller monitors the rpm of the machine and does not allow the motor to overspeed.
The Machine has safety features for the detection of Imbalance and stops automatically.
Warranty 3 years from the date of installation.
4 lines, 20 characters Jumbo LCD Display for set time, run time, set and run RPM, RCF.
 50 programs can be stored in memory.
Programmable Acceleration Time: 40-200 Sec and Deceleration Time: 40-200 Sec with advanced Coast Feature condition and opens automatically after centrifuge rotor stops.
 Dynamic brake (automatic) .
 Fast spin option.
 Delta Industrial Automation VFD and SMPS (Make in India).
The machine can run fixed angle rotors, swingout rotors, well plate rotors & microtube rotors.
Stainless Steel 304-grade rust-free centrifugal bowl for extra protection and easy cleanin User-friendly control panel. The last test parameter recalls and displays automatically on LCD after resuming of Power

Lab heating equipment, such as hot plates, Bunsen burners, and heating mantles, is essential for precise temperature control in scientific experiments. These tools ensure safe and efficient heating of substances, supporting various processes like chemical reactions and sample preparation.

Lab cooling equipment, such as chillers, refrigeration units, and cryogenic coolers, is essential for maintaining precise low temperatures during experiments. These tools help in controlling thermal reactions, preserving samples, and supporting processes like freezing or cooling chemicals and biological materials.

Shakers and stirrers are used to mix or agitate liquids in labs. Shakers rapidly shake containers, while stirrers continuously mix solutions for uniform consistency.

Discover the UV-VIS Single Beam Spectrophotometer, your essential tool for precise measurements in the ultraviolet and visible spectrum. Analyze absorbance, transmittance, and concentration with ease. Ideal for research, education, and quality control.

Unique optical system, 1200 lines/mm grating.
The instrument has basic functions of photometric analysis and quantitative analysis.
With PC software, it expands the applications, such as spectral scanning, kinetics,
DNA/protein analysis,
multi-wavelength test, etc...
Store 200 test data and 100 standard curves;.
Deuterium and Tungsten lamp can ON / OFF individually to increase the shelf life.
Large sample chamber can accommodate 5-100mm cuvettes.
Photometric Mode - T, A, C, E.
PC software available

Technical Specifications: 

Optical System : Single Beam, Grating 1200 lines/mm
Spectral Bandwidth : 2 nm
Wavelength Range : 190-1000nm
Wavelength Accuracy : ± 1nm
Wavelength Repeatability : + 0.5nm
Photometric Range :  0-200%T, -0.3~3A, 0-9999C
Photometric Accuracy : ± 0.5%T
Photometric Repeatability : ± 0.3%T
Photometric Mode :  T, A, C, E
Stray light : ± 0.3%T
Stability :± 0.002A/h @500nm
Baseline Flatness : ±0.002 A
Noise : ±0.001 A
Wavelength Setting :  Auto
Display :  128 x 64 LCD
Light Source :  Deuterium & Tungsten lamp
Detector :  Silicon Photodiode
Cell Holder :  4 position 10mm cell holder
Output :  RS232C
Powersupply : AC 220V/50Hz
Packing Dimension : (LxWxH) 700 x 580 x 340mm
Gross Weight : 19kg

Water testing equipment includes devices like pH meters, turbidity meters, and water quality testers. These tools are used to measure various parameters such as pH, turbidity, and chemical contaminants, ensuring water safety and compliance with environmental standards.

Blood testing equipment includes devices like blood glucose meters, centrifuges, hematology analyzers, and microscopes. These tools are used to analyze blood samples for various parameters, aiding in the diagnosis and monitoring of health conditions.

Clinical diagnostic analyzers are devices used to perform various tests on patient samples, such as blood, urine, or saliva. Examples include automated chemistry analyzers, hematology analyzers, and immunoassay analyzers, which help in diagnosing diseases by measuring specific biomarkers, cell counts, and chemical compositions in samples.

Micropipette Single Channel
An ergonomic handle hook design for easy grip in the palm.
Unique design for the tip eject button.
A clear reading window.
The pipete can be half autoclaved at 121 C.
A tip one made of durable chemical materials, with excellent chemical corrosion resistance.
Ease of calibration and maintenance.
Availability for high temperature and high pressure, disinfection of part of the device.

Beakers and jugs are used for holding and measuring liquids. Beakers are wide-mouthed and used for mixing, while jugs are larger containers for holding and pouring liquids.

Racks and stands are used to hold lab equipment securely. Racks are designed to organize test tubes, flasks, or other items, while stands provide support for equipment like burettes, thermometers, or other instruments during experiments.

Tubes and vials are used for storing and handling samples in labs. Tubes (like test tubes) are cylindrical containers used for mixing or heating small amounts of substances, while vials are small, sealed containers used for storing liquids, powders, or samples.

Sturdy Metal body with all-glass optics.
Complimentary Pack of 50 Slides-1-1.2mm, 75x26mm & Cover Slips.
SMPS Based Power Supply ie compatible for wide Voltage range from 100V to 220 Volts.
Ergonomic design with CLARITY optics.
Eight Magnification configurations: 40X, 60X, 100X, 150X, 400X, 600X, 1000X, 1500X.
High-Quality CLARITY Glass optics with Anti-fungus, Anti-reflection coating.
All objectives are perfectly para-focused with no image shift thus reproducing Sharp and Clear Images.
Professional brand new microscope, used by Doctors, Pathologists, Vets, Students, Researchers. High-Quality Quadruple nosepiece with positive click stops.
Movable Abbe Condenser 1.25NA, adjustable iris diaphragm.
Slide and Objective protection via an upward stage stopper.
Dual Side focusing controls.
Coarse and fine focusing controls for precise focusing of the specimen.
LED Illumination standard (Halogen illumination on request) Quality Tested,
Body parts made of Aluminium & solid brass for rugged durability.

Technical Specifications

Observation Head: Binocular observation head inclined at 45, rotateable through 360, interpupillary distance adjustment ring 54-74mm, dioptric adjustment ring on the left having adjustable dioptric scale.

Main body: All parts die-cast to provide long life & good mechanical strength.

Focusing:� Precise and Separate coarse and fine focusing controls with ergonomically placed knobs on both directions.

Magnification Configurations:40X, 60X, 100X, 150X, 400X, 600X, 1000X, 1500X

Eyepieces: Wide field 10x, 15x pairs

Objectives: SEMI PLAN ACHRO� Din objectives 4x, 10x, 40/45x s. L. 100x oil immersion (s. L. ).

Nosepiece:� Quadruple nosepiece revolves on ball bearing.

Mechanical stage: Co-axial low positioned mechanical x-y stage of size 120 x 125 mm with stage fine vernier graduation.

Condenser: Abbe condenser n. A. 1. 25 having an aspherical lens, adjustable iris diaphragm.

Illumination: Inbuilt white bright LED Illumination with SMPS based power supply 100-220V.

High speed Micro Centrifuge Max. R.P.M. 16000 and r.c.f 16800

Heavy duty plastic injection moulded body.

Stainless steel protection bowl.
Fitted with a well-balanced universal motor having long life with high-grade carbons.

Lines of 16-character LCD display R.P.M set time and run time

Digital timer which can be set form 0-99 minutes in interval of 1 minute.

Programmable speed regulator from 2000 to 16000 in variation of 100 RPM last test parameter recall and display automatically on LCD




=� � � � � � � � � � Dimension� of� Machine:
L� =� 290mm,� W� =� 270mm, H� =


=� � � � � � � � � � Weight� of� Machine:
9.5kg.� approx.


=� � � � � � � � � � Dimension� of� box:
L-355mm� x� W355� x� H-340mm


=� � � � � � � � � � Weight� of� Box
11� kg.� approx.



Supply� completed� with� following� accessories:
4� � � � � Rotor� Head� to� accommodate� 12� eppendorf/� Micro� Centrifuge� Tubes
with� cover� of� 1.5ml /2ml (12 x 1.5/2ml)
4� � � � � Reduction� adopters� for� 0.2/0.5ml� eppendorf� (Micro� Centrifuge� Tubes).
Supply� is� complete� with head� Puller,� Spanner,� Instruction manual,� Cord� &� plug� to� work� on� 220� volts� 50Hz� A.C.

Description

Haematocrite Centrifuge Machine, Max. speed 13000 r.p.m.
Fitted with a well-balanced universal motor having long life with high grade carbons.

2 Lines of 16-character LCD display of R.P.M, R.C.F set and run time.

Last test parameter recalll and displays automatically on LCD.

Microprocessor-based digital timer of range 0-99 min.

Preset speed controls thru microprcessor from 2000 to 13000 R.P.M in interval of 100 RPM

Dimesnion of Machine: Weight of Machine: Dimension of box: Weight of Box

L=290mm, W--=270mm, H=240mm

9.5 kg approx.

L-355mm x W-355xH-340mm

High speed, high capacity bench top, Laboratory Centrifuge Machine, Microprocessor based

Heavy-duty C.R.C construction finished with powder coating

Stainless steel centrifugal bowl for extra protection and easy cleaning.

Fitted with well balanced brushless motor with electronic drive. Digital timer 1-99 minutes.

4 Line 20 characters. LCD display for set time run time, set and run RPM, RCF and rotor identification.

10 Programmes can be stored in memory
An additional electronic lid lock that does not allow lid to open when the machine is running and opens automatically after the centrifuge time is over.

Selection of 3 acceleration +3 deceleration profile.

Programmable speed regulator from 200 to 2000 interval of 100 RPM

Last test parameter recall and displays automatically on LCD

Supply completed with, instruction manual cord, plug to work on 220 volts 50 Hz A.C

Machine come

4 Genealize sepecs are mentioned at page no 1 rest are as under :-
4 the body is made of CRC sheet finished in powder coating

4 see through acrylic lid with lock

Compact P.R.P Test Centrifuge Machine, Microprocessor-based, digital.

Body made of rust-proof ABS plastic injection moulding with metallic protection bowl.
Lid lock for safe driving.

2 Lines of 16 character LCD display of R.P.M for set and run time.

Two programs are feeded in software of machine as per the recommendations for P.R.P tests.
(i) First Program 4 minutes, 34000 RPM
(ii) Second Program 2 minutes 3500 RPM OR

We can program speed from 500 to 5000 RPM in varigation of 100 RPM as per doctor requirement.

Last test parameter recall and display automatically on LCD.

Sample holding Capacity : 4 P.R.P Syringes of 20 Ml.
Dr. P.R.P Kit having 20 ml syringe can be used with our machine

Technical Parameter

4 Motor Universal motor (with carbon brushes) 1/8 H.P

Compact P.R.P Test Centrifuge Machine, Microprocessor based, digital.

Body made of rust proof ABS plastic injection moulding with metallic protection bowl.

Lid lock for safe drive.

2A lines of 16 character LCD display of RPM for set and run time.

Two programs are feeded in software of machine as per recommended by for P.R.P. tests.

First program 4 minutes, 3400 RPM
Second program 2 min, 3500 RPM pr

We can program speed from 500 to 5000 RPM in variation of 100 RPM as per doctor requirement.

Last test parameter recall and displays automatically on LCD.

Sample holding capacity: 8 Sample tubes up to 15 ml
P.R.P kit: Kit of any brand having capacity up to 15ml tube can be used with our machine.

General Purpose Laboratory Centrifuge Machine, Max. speed 5200 r.p.m.

Heavy-duty C.R.C construction finished with power coating.

Double-walled ABS injection moulded lid which is light weight to avoid accident.

Inter lid lock and metallic centrifuge bowl for safety 2 lines of 16 character LCD display of RPM set time and run time

Microprocessor based programmable speed control from 500 to 5200 RPM of rotor and digital timer (1-99 minutes)
Last test parameter recall and display automatically on LCD.

Low noise, smooth and soft start and stable speed output

Wide variety of rotors and reduction adapters available on demand at extra cost.

Robust, reliable metal construction and excellent optical performance.
Extremely simple to use, this instrument is ideal for the examination of everyday objects in fascinating yet understandable detail. Highly recommended for� Primary Science Education� and� Field Study Centres.
Black stoving finish and hard instrumental chromium plating will accent any classroom environment.

High quality Wide-field Pairs of 10x and 15x ANTI-FUNGAL, ANTI REFLECTION COATED OPTICS
Magnification: 100x TO 675x
1 year Manuafcturer's warranty but no breakage included.
ANTI-FUNGAL, ANTI REFLECTION COATED OPTICS
Nicely packed in Styrofoam enclosure with box and INSTRUCTION MANUAL
L.E.D Substage Attachment with Light Adjuster.
Optics: All glass optics,Para focal, precentred, high numerical aperture, high resolution with Special coating having no effect of: Moisture, fungus, fogginess or any other weather effect with passage of time.
Magnification: 100x to 675x
Stand: All metal constructed body with properly balanced, inclinable arm up to 90 degree for easy viewing
Focussing: Separate coarse fine focusing knobs
Stage: Full square stage 112 x 112 mm size.
Illumination: Substage Mirror Attachment and L.E.D Substage Attachment with Light Adjuster.
Nosepiece: High Quallity triple nosepiece with positive click stops
Objectives: 10x & 40/45x (s. L.)(all achromatic) OBJECTIVES.
Eyepieces: High quality Wide-fields 10xWF & 15xWF
Condenser: MOVABLE abbe type condenser with iris diaphragm
Packing: Nicely packed in Styrofoam enclosure with box and INSTRUCTION MANUAL

PREMIUM quality KEOWA optics provides clear and bright images and 40% larger field of view as compared to ISI marked microscopes

Forced convection digitally controlled hot air ovens suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone.
Features


Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Most ideal for various experiments in microbiology, cell cultivation of animals and plants and food for various laboratories, industries, R & D labs, etc.
Synthetic door gasket made of neoprene on the double-walled door.
User-oriented design of shelves makes you adjust each space of shelves without difficulty.
Adjustable two ventilation slides control inner air/vapor circulation.
Beaded heating elements are placed in ribs, at bottom and sides for uniform heat distribution.

Constructional Features


Outer body made of CRC Sheet duly powder coated
Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade).
Gap between the inner chamber and the outer wall is filled with high-grade mineral wool for minimal heat dissipation.
Bigger sized units mounted on caster wheels for easy portability.
Door fitted with heavy-duty hinges and door handle ensuring there are no leakages through the door gasket.
Temperature Range: 50Ã??C to 250Ã??C
Temperature Accuracy: �±1�?C
Temp. Controller: Microprocessor Based Digital Temperature Indicator-Cum-Controller with LED OR LCD Display OR TFT Touch Screen Display Controller (Option)
Type: Available with forced convection system
Regulator: Solid-state electronic relay with protective heat sink
Safety Device: Over-temperature limiter switch prevents overheating
To work on 220/230V AV, 50/60 Hz supply

Useful for life science applications, Fermentation Studies, Ageing Tests, Growth Studies and biological cultures under various controlled temperature conditions.


Advanced shaking mechanism provides quiet shaking and precise speed control with digital display
Minimum noise, no vibration and minimal footprint
Stabilized orbital motion under uneven load distribution
Various configurations of lotus clamps available for Erlenmeyer flasks
Interior made of Stainless Steel (304 grade) with a drain-off-facility for spill overs.
One set of lotus clamps holders with one shaking platform of stainless steel (SS-304) supplied with the unit as a standard accessory
Stationery shelves made of Stainless Steel (SS-304) for use of the unit as a standard B.O.D. Incubator, can be supplied at an extra cost.
Automatic restart at preset speed in case of power failure.
Complete with universal and multipurpose glassware holding expandable spring wire platform for accommodating different shapes and sizes of laboratory bottle, breakers and erlynmeyer flaks etc.

Most suitable for experiments requiring low-temperature conditions like microorganism or activation, cell culture process of animals and plants, good storage and desalting process of enzyme extracts, etc.
With a solid double-walled door and a full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without distributing the process temperature.
Excellent quality magnetic gum packing door gasket for an external door.
User-oriented design of shelves makes you adjust each space of shelves without difficulty.
Forced air circulation at the triple-walled back by the durable coaxial blower, maintains optimum temperature uniformity and homogeneity.
High-grade HIGH PRESSURE FOAMED IN-PLACE PUF INSULATION between outer and inner chamber for minimal thermal losses.
Caster wheel mounted for easy portability.
Front double walled door is provided with lock and key arrangement.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
Finned tube evaporator facilitates uniform and faster cooling effects.

Forced convection digitally controlled bacteriological incubators suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone upto 70C.
Features

Designed for critical laboratory applications for controlled temperature range up to 70C with an accuracy of ± 0.5C.
Integrated built-in see-thru toughened glass window in the double-walled door.
Forced convection model accounts for temperature uniformity and higher control accuracy.
Auto cut-off of blower and heaters on door open position.
Seamless rounded back edges of internal work chamber and semicircular arcs at corners ensures easy clean-up and uniformities.
Microprocessor Based Autotune PID temperature controller for PV/SV indication, timer, and cycle end alarm.
These units are featured with Microprocessor Based AUTOMATIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER with an in-built DIGITAL TIMER to control the temperature. Once the unit is switched ON heating starts automatically and once the set/desired value is achieved the in-built AUTOMATIC DIGITAL MINUTE TIMER starts automatically. Once this set time period is over the heaters are switched OFF automatically and the unit sounds a BUZZER, thus alerting the user that process is complete.
Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade).
Outer body made of CRC Sheet duly powder coated
Horizontal on face cross-flow air circulation accounts for tighter uniformities and accuracy.
Specially designed silicone door gaskets accounts for minimal heat dissipation and leakages thus accounts in electrical energy servings.
To work on 220/230V AV, 50/60 Hz supply

A Mini Centrifuge Machine is a compact and versatile laboratory device designed for the rapid separation of small liquid samples. It employs centrifugal force to spin microtubes or small containers, effectively separating liquids from solids, such as cells or precipitates. These machines are commonly used in molecular biology, biochemistry, and clinical laboratories for tasks like DNA extraction, cell pelleting, and quick sample preparation, offering a convenient and space-saving solution for various research applications.
Key Features :

Micro processor controlled, Micro-Centrifuge machine (Mini Centrifuge)
Speed range from 1000 to 10000 r.p.m. in step of 1000.
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Quiet & reliable
Small foot print
Built in power supply
High quality motors
Polycarbonate transparent cover
Supply completed with 2 standard rotors as under :

(i) Angle Rotor 6 micro centrifuge of 1.5ml capacity

(ii) Angle rotor 12 micro centrifuge tubes of 0.5ml capacity

Micro-Centrifuge machine (Mini Centrifuge)
Speed fixed 7000 rpm
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Supply completed with 2 standard rotors as under :


Angle Rotor 6 micro centrifuge of 1.5ml capacity.
Angle rotor 12 micro centrifuge tubes of 0.5ml capacity.

Refrigerated Brushless centrifuge with head 1.5 ml.Microprocessor based 128x64 Graphic lcd display, Temp -20 to ambient, Lid lock, Drive controlled, RPM 16000, Timer in built 99: 99, Heavy body vibration free.

Max. Speed : 20000 r.p.m.
* Max. RCF : 23000xg
* Timer : 0-99 min.
* Motor : Brushless Motor
* Temp. Range : From room temperature- to Minus 20�°C
* Temp. Accuracy : �±2�°C
* Power : AC 220V 50 Hz 20A
* Weight : 55� kg. approx.
* Dimension : L-25â?? x W-20â?? x H-14â?? approx

Special Feature :
* Low Sound
*Fitted with vacuum legs for better griping on table.
* Vibration free
* C.F.C. Free refrigeration
* Kirloskar compressor

MODEL
LMIF200T

Make
LABMAN


Capacity (kg per 24hours)
200� kg


Storage Capacity
60kg


Display Type
Touch screen


Ice Type
Flake ice


Storage Bin Material
ABS


Cooling� Method
Compressor cooling with fan cooling


Ambient Temperature
Below 25C for Optimum Working


Water Temperature (Recommended)
20C


Construction Material
Stainless steel


Noise Level & Water Supply Size
58db & 25mm


Refrigerant
R290A


Aut� off
yes


Input Power
850W


Packing Dimension (LxWxH)
790� x 715� x1479 mm


Net Weight
68kg


Gross weight
78kg

MODEL
MIF30T-LMIF50T-LMIF100T

Make
LABMAN

Capacity of Ice flake (kg per 24 hrs.)
30 kg -50 kg-100 kg

Storage Capacity (kg - app.)
7 kg-15 kg-25 kg

Storage bin
ABS Plastic


Cooling Method
Air


Ambient temperature
Below 25C for optimum working


Construction
Stainless Steel


Noise level
a52 dB


Water Supply
3 / 4 inch BSP


Refrigerant
R290A


Input Power
180W - 280W - 420W


Power supply
Using AC 220V,50/60Hz


Dimension LxWxH (mm)
300X493X547 - 380X543X722 - 548X611X883


Gross Weight
36 kg - 45 kg - 64 kg

MODEL
MIF30T-LMIFSOT-LMIF100T

Make
LABMAN

Capacity of Ice flake (kg per 24 hrs.)
30 kg -50 kg-100 kg


Storage Capacity (kg - app.)
7 kg-15 kg-25 kg


Storage bin
ABS Plastic


Cooling Method
Air

Ambient temperature
Below 25C for optimum working
Construction
Stainless Steel


Noise level
a52 dB

Water Supply
3 / 4 inch BSP


Refrigerant
R290A


Input Power
180W - 280W - 420W


Power supply
Using AC 220V,50/60Hz


Dimension LxWxH (mm)
300X493X547 - 380X543X722 - 548X611X883


Gross Weight
36 kg - 45 kg - 64 kg

MODEL
MIF30T-LMIFSOT-LMIF100T


Make
LABMAN


Capacity of Ice flake (kg per 24 hrs.)
30 kg -50 kg-100 kg


Storage Capacity (kg - app.)
7 kg-15 kg-25 kg


Storage bin
ABS Plastic


Cooling Method
Air


Ambient temperature
Below 25C for optimum working


Construction
Stainless Steel


Noise level
a52 dB


Water Supply
3 / 4 inch BSP


Refrigerant
R290A


Input Power
180W - 280W - 420W


Power supply
Using AC 220V,50/60Hz


Dimension LxWxH (mm)
300X493X547 - 380X543X722 - 548X611X883


Gross Weight
36 kg - 45 kg - 64 kg

To maintain the temperature, it can be attached in below instruments.
Viscometer Spectrophotometer Rotary Evaporator
Polarimeter Refractometer Fermentation Tank
Electrophoresis System Chromatographic Column

LCD Display.
Cooling Heating Function.
PT100 Temperature Sensor.
Both Sides folding handle for easy movement.
Overheat Protection, PID temperature Control System.
Stainless Steel Inner Tank, Water Level alarm Function.
Fast Cooling, Low Noise, Low Vibration, stable and reliable performance.
Pump Flow rate 8L/min. & Programmable Temperature controller.

To maintain the temperature, it can be attached in below instruments.
Viscometer Spectrophotometer Rotary Evaporator
Polarimeter Refractometer Fermentation Tank
Electrophoresis System Chromatographic Column

LCD Display.
Heating Function.
PT100 Temperature Sensor.
Both Sides folding handle for easy movement.
Overheat Protection, PID temperature Control System.
Stainless Steel Inner Tank, Water Level alarm Function.
Pump Flow rate 8L/min. & Programmable Temperature controller

TECHNICAL SPECIFICATIONS :

Temperature Range :Ambient Temperature to 100 C
Temp. resolution & Accuracy : 0.01 C & Accuracy +0.05 C
Display : LCD Display
Refrigeration  : NA
Pump circulation -  Internal & External
Temperature sensor : PT100
Pump flow rate : 8 L /min
Bath Tank capacity-  10L
Tank size (LxWxD ) -  270 x 200 x 200mm
Bath Opening & Bath depth : 180 x 140 mm & 200 mm
Power Requirement : AC 220V / 50Hz
Net / Gross Weight : 12kg / 16kg

To maintain the temperature, it can be attached in below instruments.
Viscometer Spectrophotometer Rotary Evaporator
Polarimeter Refractometer Fermentation Tank
Electrophoresis System Chromatographic Column

LCD Display.
Heating Function.
PT100 Temperature Sensor.
Both Sides folding handle for easy movement.
Overheat Protection, PID temperature Control System.
Stainless Steel Inner Tank, Water Level alarm Function.
Pump Flow rate 8L/min. & Programmable Temperature controller

TECHNICAL SPECIFICATIONS :

Temperature Range :Ambient Temperature to 100 C
Temp. resolution & Accuracy : 0.01 C & Accuracy +0.05 C
Display : LCD Display
Refrigeration  : NA
Pump circulation :  Internal & External
Temperature sensor : PT100
Pump flow rate : 8 L /min
Bath Tank capacity ;  10L
Tank size (LxWxD ) :  270 x 200 x 200mm
Bath Opening & Bath depth :  180 x 140 mm & 200 mm
Power Requirements  : AC 220V / 50Hz
Net / Gross Weight :  12kg / 16kg

Our boiling water baths come in rectangular shape and engineered to meet most demanding needs of heated applications.

Double walled, inside made of Stainless Steel 304 Qlty.
Outside Mild Steel sheet painted in Epoxy Powder Coating.
25mm insulation with the mineral wool.
With concentric rings which are made of stainless steel 304 qlty.
Temperature by a thermostat from few C above ambient to 100C �± 1C.
With wire and plug but without thermometer.

Digital Thermostatic Display.
Stainless Steel Tank.
High Precise Temperature Control
 High Corrosion Resistance.

MODEL   DWB4 DWB6

Column   2 Rows 4 Holes 2 Rows 6 Holes
Internal volume (approx.)  18L
Temp. Rang   RT+5~99.9 C
Temp. Resolution, Accuracy 0.1 C,  Accuracy ±0.5 C
Water sink   Stainless steel
Temp. control mode   PID
Cover aperture   120mm
Cover Ring per hole 5pcs.
Power Supply AC 220V/ 3.6A(50/60Hz
Power rating   1200W
Inner Chamber size (LxWxH   300 x 300 x 140 mm  450 x 300 x 130 mm
Gross Weight 6kg  8kg

Precision meets automation! Our Automatic Rotary Microtome delivers accurate, consistent tissue sections for histological analysis, streamlining your lab workflow.

Features:

LCD Display with Feather Touch Keypad
Section thickness adjustable.
Cutting/Trimming Mode
Fast Forward/Backward Function
Increase/Decrease Section Thickness
Section Counter/Section thickness display
Motorized Feed Drive
Coarse feed speed directions (in both direction) around 300µm/s & 900µm/s
Ergonomic standard specimen clamp.
Sturdy knife holder with angle adjustment scale & locking lever.
Disposable knife holder with lateral displacement feature.

A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron.

Features :� 

Independent feed mechanism with automatic safety device,
Universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen
� full swing protective cover for easy cleaning and lubrication.
The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques




Feed adjustments
1-50 �µm
Overall Dimensions
1 �µm


Minimum thickness
1 �µm
Net Weight
30 Kgs. approx.


Total Feed excursions
28mm.
Gross Weight
42 Kgs. approx



The complete unit is packed with the following accessories in a wooden case :-



Object Holders (3 Nos.)
1 Set
Lubricating Oil Bottle
1 No.


Knife 120mm in a box
1 No.
Dust Cover
1No.


Honing Stone
1 No.
Operating Manual
1 No.

Precision engineering meets cutting-edge technology in our Rotary Microtomes. Designed for precise sectioning of biological tissues, these instruments are ideal for histology, pathology, and research applications

Advanced Tissue Processor is designed to prevent a solution to the rapid processing of tissue in HistologyLaboratories. It removes all the water from a tissue sample and replaces it with paraffin waxwith optimum speed to curtail damage to the tissues caused by dehydration and shrinkage..

Easy to do programming interface, LCD display shows all the parameters
throughout the process, such as station number & remaining time.
Automatic Tissue Processor is designed to prevent a solution to the rapid
processing of tissue Histology Laboratory. Tissue processor removes all the
water from the Tissue sample and replaces it with paraffin Wax with optimum speed to curtail damage to the tissues caused by dehydration and
shrinkage.

Cold plate is used for re-cooling blocks prior to sectioning or as part ofan embedding center to cool molds after paraffin dispensing.

Exclusive 3 part modular system for an agronomical operation.Assemble the modular units to your convenience or place them separately.Fast embedding of tissue specimens in paraffin, vast for huge quantities.Optional equipped with novel heated forceps, hotonly at the tip.

Specially designed rectangular slide warming table of different size has warming bed of specially casted plate of aluminium alloy duly anodized with jet black colour.

Specially designed concealed heaters are embedded at the base.
Specially designed rectangular slide warming table of different size has a warming bed of specially casted plate of aluminum alloy duly anodized with jet black color.
Temperature range from ambient +50C to 85C is controlled through a Microprocessor Based Digital Temperature Controller.
Feather keypad with LED display for current and set
temperatures.
Temperature and working indicator light.
Variable heat control.
Uniform temperature
throughout the warmer surface.
Maximum surface temperature 85degree C.
In-built memory to store

MINI ROTARY SHAKER is supplied by the company, REMI.

This Mini Rotary Shaker is designed for gentle mixing of fluids of different capacities. This Mini Rotary Shakeris supplied with 0-15 minutes timer. It incorporates a speed regulator max. 180 rpm.

Product specifications:

Catalog number:RS-12R
Brand: REMI

Product features:

Speed range: 80-180rpm
Platform size: 7x11 inches
Overall dimension (WXDXH):270x260x156 mm
Speed indicator: Digital
Digital count down timer: 15
Shaking orbit: 10

Application in molecular biology, immunology, chemistry lab
Compact design
Compatible for use with various capacity conical flasks and different sample containers.
Silent and stable operation
Digital set up of RPM and time with independent LED display
Maximum stirring speed upto 300RPM
Built in DC brushless motor
Microprocessor controlled
User-Friendly
Low consumption
Audible alarm at time cycle end for safety and ease of unsupervised operation

Digital LCD Display.
Last Measurement in Memory.
Heating & Stirring can proceed Simultaneously.
Bushless Motor for Low Noise.
Anti scratch and Corrosion Resistance.
Ceramic Plate Surface.
ABS Cabinet.

Brand
Labtical


Model Name/Number
MS5LH

Type
Magnetic Stirrer

Speed range
100-2000rpm


Maximum mixing capacity
5000 ml


Temp. Range & Accuracy
300C Accuracy +1C


Temperature Sensor
PT100


Time range
0-99h.99min


Top Plat Size
168 x 168mm


Display
LCD


Motor Type
Bushless Motor


Operating Mode
Temperature, Speed, Timing, Memory (last data)


Power
500W


Power Supply
AC 220V / 50-60Hz


Packing Dimension
33.5 x 23.5 x17cm


Weight
2.5kg

Magnetic stirrer is mainly suitable for liquid mixing, it can simultaneously do heating and stirring of low viscosity liquids or solid liquid mixtures. Its used as an experimental tool in various Universities, Environmental Protection, Sanitation, Epidemic Prevention,
Chemical Tap Water, Medical and Other Units.

Digital LCD display.
Control through Knob.
� Maximum Stirring Volume 2L.
� Stirring - MS100S.
� Heating & Stirring - MS280H








Brand
Labtical


Model Name/Number
MS280H


Type
Magnetic Stirrer


Function� 
Stirring & Heating only


Temp. Range & Accuracy
280�°C & Acc.+1�°C (<100�°C)+ 3�°C(<280�°C )


Heating Power (Wï¼?
300W


Plate Type
Ceramic Coated


Display Indication
Temperature, Time & Speed


Speed Range
200-1500rpm


Maximum Stirring Volume
2000ml


Timing range
0-999min


Display
LCD


Control method
Knob type


Plate size
130mm Ã??


Power Supply
AC 220V / 50-60Hz


Dimension
34.5 x 22.5 x16cm


Weight
2kg

Stainless Steel Magnetic Stirrer with Hot Plate Magnetic Bead is a magnetic stirrer which can be used for heating, stirring and agitating in flasks and beakers.
Its large magnet bar offers a sufficient magnetic force for heating and stirring.
The hot plate on the top of the magnetic stirrer offers ideal conditions for heating up liquids or buffers.
It� has a high-quality stainless steel body and paddle, as well as a hot plate.
The Magnetic stirrer is also equipped with an adjustable stir bar, which allows you to control the speed of your chemical reactions.
This magnetic stirrer has a built-in temperature sensor and an adjustable thermostat that can be set to control the temperature of its 100W silicone heater.
The stainless steel body and lid of this magnetic stirrer offer durability and easy maintenance, while its powerful neodymium magnet ensures smooth mixing action.
� Speed - Upto 2500rpm variable
Temperature - Ambient to 300 degree
Plate Size - 250X250mm
Plate Material - Stainless Steel
Capacity - 2lt

Laboratory stirrer is a laboratory equipment used for mixing and stirring liquids and solutions. It is designed to provide a consistent and uniform mixing of substances in a laboratory setting. The stirrer is made up of a motor, a shaft, and a mixing blade. The motor provides the power to rotate the shaft, which in turn rotates the mixing blade. The mixing blade is designed to create a vortex in the liquid, which helps to mix the substance thoroughly.

The motor stirrer having maximum speed upto 4000 r.p.m. unit is clamped to a C.P. rod fitted�  on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation. With 1/20 H.P. Universal Motor

Digital LCD Display.
100 ~ 2500rpm speed.
Maximum Volume 20L.
Stirring has three modes - Clockwise,
Anticlock wise & Alternating.
Stainless Steel Head.
Digital type bushless motor.

Tissue homogenization is a process, often used in the biotech industry, used to prepare tissue samples for further study, research, or development. The process involves the lysing or breaking apart of cells in order to release their contents.

Stepless speed regulation
Capacity: 5ml-250ml
Random working head configuration: 10mm
1ml Minimum processing capacity (water)
Processing capacity (water): 250ML
5500mpas Maximum viscosity:
Noise level 50DB

Blood Roller Mixer is specially designed for the preparation of blood homogenous. It is commonly used in counting Platelets, RBC, and WBC counts on Hematology Analyzer. It is also used in the preparation of the solution like viscous substances, mixing blood samples, liquid-solid suspensions that need minimum aeration.
Specifications



Parameters
Values


Roller size
4 Nos. x 230 mm long


RPM
30 RPM/ 36 RPM


Mixing Time
15 to 20 Minutes


Weight
2.0 Kg. Net


Capacity
Container 6 Nos. (4ml) or 5ml x 15 Nos


Roller size
4 Nos. x 340 mm Long


RPM
30 RPM/ 36 RPM


Mixing Time
15 to 20 Minutes


Weight
2.4 Kg. Net


Capacity:zzz
Container 12 Nos. (4ml) or 5ml x 24 Nos

Digial Display Vortex Mixer is powered by a brushless motor and features an eccentric structural design.This innovative mixer effectively blends and mixes liquids inside a tube.

LCD Display with white back light
Speed Timer (1~99h 59m 59s)
Aluminum Alloy Base stable body
Soft silicone foot pads
Supply with Standard Head
Operating Mode - 2 Types - Auto run sensor, continuous run for various Mixing application.
Super shockproof, Bush less Motor.




Variable Speed Setting
2500 RPM


Orbit
4 mm


Brand
Labman


Model Name/Number
LMVM60D


Frequency
50 Hz


Weight
3.5 Kg


Dimensions (W X D X H)
250x220x190mm


Permissible Ambient Temperature
5C


Display Type
LCD Display With White Back Light


Base Material
Aluminium Alloy


Voltage V
220V


Display Function
Speed and Time


Humidity
<80%


Shaking Movement
Orbital


Input Power
60W


Oscillation Base MaterialMode
Circumference


Operation Mode
2 Types- Auto Run Sensor, Continuous Run


Adjustment Method
Keypad

Vortex mixers are mainly used to mix beakers or small vials of liquid. The device itself is straightforward, consisting of an electric motor with a vertical drive shaft.The vortex speed is adjustable and usually ranges from 100 to 3,200 rpm.

Compact, rugged construction
Heavy metal base & rubber feet prevent movement of the shaker during use
Choice of continuous & touch mode
Variable speed control
Include one hand insert, micro tube insert & cup attachment

Made of Complete SS 304 GMP Model.Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 �¼ guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.

Features

Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of SS 304
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.



Technical specifications

Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz

Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.

Horizontal Laminar complete SS 304 GMP model.Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features

Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of stainless steel (SS-304grade)
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.

Technical specifications

Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
Work Table: Stainless Steel (SS-304 grade)

Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.

These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Features

100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.



Class II Biosafety Cabinet Protection

Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.



Class II Biosafety Cabinet Key Features

A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the room or exhaust to a facility exhaust system.



Class II Biosafety Key Applications

Typically used for biosafety levels 1 through 3 for low to moderate risk biological agents.
The type B2 total exhaust cabinets are widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
All types of Class II cabinets may be used in biosafety level 4 laboratories when workers utilize positive pressure suits. However, for level 4 Class III cabinets are recommended.



Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.



Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of electrogalvanized powder coated OR Stainless Steel (SS-304) (as ordered).



Front Window/Sash
Front Sash consists of a thick plexi-glass or toughened transparent glass (Option) for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protection user from exposure to harmful Ultraviolet radiation.



Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.



Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and the motor blower is turned off/on as and when the front sash is closed/opened. UV lamps function through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.



Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.



Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.



Floor Stand and Castor Wheels
Floor Stand is made up of heavy-duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.



Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table

These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Bio safety Cabinet Class II Type A 2 GMP model,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Bio safety Cabinet Class II Type A 2,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Modular fully loaded chemical fumes extraction hoods after excellent performance and high suction power. Excellent chemical resistance & international quality electrical & gas connection utilities.

Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.

Digital LCD Display.
Last Measurement in Memory.
Heating & Stirring can proceed Simultaneously.
Bushless Motor for Low Noise.
Anti scratch and Corrosion Resistance.
Ceramic Plate Surface.
ABS Cabinet.



Brand
Labtical


Model Name/Number
MS5LH


Type
Magnetic Stirrer


Speed range
100-2000rpm


Maximum mixing capacity
5000 ml


Temp. Range & Accuracy
300C Accuracy +1C


Temperature Sensor
PT100


Time range
0-99h.99min


Top Plat Size
168 x 168mm


Display
LCD


Motor Type
Bushless Motor


Operating� Mode
Temperature, Speed, Timing, Memory (last data)


Power
500W


Power Supply
AC 220V / 50-60Hz


Packing Dimension
33.5 x 23.5 x17cm


Weight
2.5kg

Tissue homogenization is a process, often used in the biotech industry, used to prepare tissue samples for further study, research, or development. The process involves the lysing or breaking apart of cells in order to release their contents.

Stepless speed regulation
Capacity: 5ml-250ml
Random working head configuration: 10mm
1ml Minimum processing capacity (water)
Processing capacity (water): 250ML
5500mpas Maximum viscosity:
Noise level50DB

Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.

Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.

SALIENT FEATURES & CONSTRUCTION OF FUME HOOD


Low Cost.
Low Noise.
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.

Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab

SALIENT FEATURES & CONSTRUCTION OF FUME HOOD


Low Cost.
Low Noise..
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.

Bio safety Cabinet Class II Type A 2,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Features

30% air exhaust
70% air recirculation
HEPA OR ULPA -filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
HEPA OR ULPA -filtered downflow air is a portion of mixed downflow and inflow air from a common plenum.
Negative Pressure air surrounding all biological contaminated ducts and plenums.
Negative pressure surrounds the work area with double wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA OR ULPA (High Efficiency Particular Air) filters. The prefilter fitted extends the life of HEPA OR ULPA filter drastically. Fitted with HEPA OR ULPA Filter made from water resistant, fire retardant, imported micro fine glass fibre media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼.These filters are designed to accommodate higher air flow volume.
Prefilter are made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with an efficiency of down to 10 micron. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevent blockage
U.V and fluorescent interlock available
Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue.
The sash is counterbalanced for smooth and lightweight operation with the standard opening of 200mm �±10 mm for easier access to work zone and enhanced user safety.



Class II Biosafety Cabinet Protection

High velocity air forced through HEPA OR ULPA filters.
Filtered air is thrown in the chamber through jet nozzles with a high velocity which in turn disperse particulate matter on all surface.
The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum through pre-filter installed at the base.
This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment.



Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.



Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of CRC sheet duly powder coated



Front Window/Sash
Front Sash consists of a toughened transparent glass for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protects user from exposure to harmful Ultraviolet radiation.



Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.



Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and motor blower are turned off/on as and when front sash is closed/opened. UV lamps functions through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.



Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.



Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.



Floor Stand and Castor Wheels
Floor Stand is made up of heavy duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.



Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table.

Bio safety Cabinet Class II Type A 2 GMP model,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Features

30% air exhaust
70% air recirculation
HEPA OR ULPA -filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
HEPA OR ULPA -filtered downflow air is a portion of mixed downflow and inflow air from a common plenum.
Negative Pressure air surrounding all biological contaminated ducts and plenums.
Negative pressure surrounds the work area with double wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA OR ULPA (High Efficiency Particular Air) filters. The prefilter fitted extends the life of HEPA OR ULPA filter drastically. Fitted with HEPA OR ULPA Filter made from water resistant, fire retardant, imported micro fine glass fibre media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼.These filters are designed to accommodate higher air flow volume.
Prefilter are made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with an efficiency of down to 10 micron. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevent blockage
U.V and fluorescent interlock available
Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue.
The sash is counterbalanced for smooth and lightweight operation with the standard opening of 200mm �±10 mm for easier access to work zone and enhanced user safety.



Class II Biosafety Cabinet Protection

High velocity air forced through HEPA OR ULPA filters.
Filtered air is thrown in the chamber through jet nozzles with a high velocity which in turn disperse particulate matter on all surface.
The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum through pre-filter installed at the base.
This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment.



Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.



Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of SS 304



Front Window/Sash
Front Sash consists of a toughened transparent glass for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protects user from exposure to harmful Ultraviolet radiation.



Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.



Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and motor blower are turned off/on as and when front sash is closed/opened. UV lamps functions through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.



Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.


Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.



Floor Stand and Castor Wheels
Floor Stand is made up of heavy duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.

Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table.

These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.

Features

100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.



Class II Biosafety Cabinet Protection

Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.



Class II Biosafety Cabinet Key Features

A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the room or exhaust to a facility exhaust system.



Class II Biosafety Key Applications

Typically used for biosafety levels 1 through 3 for low to moderate risk biological agents.
The type B2 total exhaust cabinets are widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
All types of Class II cabinets may be used in biosafety level 4 laboratories when workers utilize positive pressure suits. However, for level 4 Class III cabinets are recommended.



Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.



Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of electrogalvanized powder coated OR Stainless Steel (SS-304) (as ordered).



Front Window/Sash
Front Sash consists of a thick plexi-glass or toughened transparent glass (Option) for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protection user from exposure to harmful Ultraviolet radiation.



Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.



Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and the motor blower is turned off/on as and when the front sash is closed/opened. UV lamps function through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.



Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.



Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.



Floor Stand and Castor Wheels
Floor Stand is made up of heavy-duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.



Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table

Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features

Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of wooden board laminated with sunmica OR CRC Sheet (powder coated) OR stainless steel (SS-304grade) (as ordered).
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.

Technical specifications

Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
MOC (CABINET): Wooden or CRC Sheet (powder coated) or Stainless Steel (SS-304)
Work Table: Stainless Steel (SS-304 grade)

Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.

Features

Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of mild steel sheet duly powder coated.
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.

Technical specifications

Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz

Vortex mixers are� mainly used to mix beakers or small vials of liquid. The device itself is straightforward, consisting of an electric motor with a vertical drive shaft.The vortex speed is adjustable and usually ranges from 100 to 3,200 rpm.

Compact, rugged construction
Heavy metal base & rubber feet prevent movement of the shaker during use
Choice of continuous & touch mode
Variable speed control
Include one hand insert, micro tube insert & cup attachment

Technical Specification:



Body Material
: Main Frame : ABS, Caps : Silicone Rubber, Base : Steel Alloy


Speed Range
: 0~3500 RPM (Variable)


Max. Capacity
: 50ml tube (Ã??30 mm)


Dimension (WxDxH)
: 114 x 114 x 93mm


Shaking Orbit
: 4.5mm


Power

: 12W


Voltage
: DC 12V 1A


Power
: 12W


Net Weight
: 900 gms


IP Class
: 62

Blood Roller Mixer is specially designed for the preparation of blood homogenous. It is commonly used in counting Platelets, RBC, and WBC counts on Hematology Analyzer. It is also used in the preparation of the solution like viscous substances, mixing blood samples, liquid-solid suspensions that need minimum aeration.
Specifications



Parameters
Values


Roller size
4 Nos. x 230 mm long


RPM
30 RPM/ 36 RPM


Mixing Time
15 to 20 Minutes


Weight
2.0 Kg. Net


Capacity
Container 6 Nos. (4ml) or 5ml x 15 Nos


Roller size
4 Nos. x 340 mm Long


RPM
30 RPM/ 36 RPM


Mixing Time
15 to 20 Minutes


Weight
2.4 Kg. Net


Capacity:zzz
Container 12 Nos. (4ml) or 5ml x 24 Nos

Digital LCD Display.
100 ~ 2500rpm speed.
Maximum Volume 20L.
Stirring has three modes - Clockwise,
Anticlock wise & Alternating.
Stainless Steel Head.
Digital type bushless motor.

TECHNICAL SPECIFICATIONS:
Overhead Stirrer - OHS100
Max. Volume : 20L
Display : LCD
Speed(r.p.m) : 100-2500
Working Time :  Continuous
Structure  : Exterior Plastic shell
Motor power:  60W
Setting & Speed mode  : Digital
Timer  : Yes
Max Viscosity :  10000 Mpas
Plate size :  200 -300 mm
Plate load  : 50kg
Power Supply Using Adaptor, : AC 220V / 50-60Hz
Dimension & Weight :  400- 250- 210 mm & 7.5kg

Magnetic stirrer is mainly suitable for liquid mixing, it can simultaneously do heating and stirring of low viscosity liquids or solid liquid mixtures. Its used as an experimental tool in various
Universities, Environmental Protection, Sanitation, Epidemic Prevention,
Chemical Tap Water, Medical and Other Units.

Digital LCD display.
Control through Knob.
 Maximum Stirring Volume 2L.
 Stirring - MS100S.
Heating & Stirring - MS280H

Brand
Labtical

Model Name/Number
MS280H


Type
Magnetic Stirrer

Function 
Stirring & Heating only

Temp. Range & Accuracy
280C & Acc.+1C (<100C)+ 3C(<280C )


Heating Power (W)
300W


Plate Type
Ceramic Coated


Display Indication
Temperature, Time & Speed


Speed Range
200-1500rpm


Maximum Stirring Volume
2000ml


Timing range
0-999min


Display
LCD


Control method
Knob type


Plate size
130mm


Power Supply
AC 220V / 50-60Hz


Dimension
34.5 x 22.5 x16cm


Weight
2kg

Digital LCD Display.
100 ~ 2500rpm speed.
Maximum Volume 20L.
Stirring has three modes - Clockwise,
Anticlock wise & Alternating.
Stainless Steel Head.
Digital type bushless motor.

TECHNICAL SPECIFICATIONS:
Overhead Stirrer - OHS100
Max. Volume : 20L
Display : LCD
Speed(r.p.m) : 100-2500
Working Time :  Continuous
Structure-  : Exterior Plastic shell
Motor power-  60W
Setting & Speed mode�  : Digital
Timer-  : Yes
Max Viscosity - 10000 Mpas
Plate size -  200- 300 mm
Plate load : 50kg
Power Supply Using Adaptor, : AC 220V / 50-60Hz
Dimension & Weight : 400- 250 - 210 mm & 7.5kg

Tissue Floatation Bath is a simple, economical, designed to lay section of Histological samples. TFB-177 provides high thermal conductivity rates and outstanding scratches resistance due to its special coating overheating protection system along with a stand- by mode.

TECHNICAL SPECIFICATION


Precise temperature control.

Built in memory for storing set temperatures.
Jet-Black surface for easy identification of Tissues. Suitable to work on 220V, Single phase, 50Hz AC supply.
Water Temperature Range: Ambient to 99C
 Temperature Tolerance: +1C
Power: 200V, 50Hz
 Tub Dimensions: 300x200x60mm

Paraffin Wax bath is required after the step of cutting paraffin sections and before theseare placed on slides. It lets tissues relax and smoothen before being mounted on slide as well as makes paraffin stick to the slide. This ensures removal of wrinkles and folds before sections are placed on the slide.

TECHNICAL SPECIFICATION:


Temperature tolerance : +1 deg. C

Water Temperature range: ambient to 90C.

Power : 200V, 50Hz

Exclusive 3 part modular system for an agronomical operation.Assemble the modular units to your convenience or place them separately.Fast embedding of tissue specimens in paraffin, vast for huge quantities.Optional equipped with novel heated forceps, hotonly at the tip.

SPECIAL FEATURES :

Microprocessor controlled five independent heating zones.
Large storage tank with filter that ensures continous flow of paraffin from the tank.
Automatic system start and stop ( 7 day memory).
Electrically heated forceps holder on both sides.
Temperature display panel for all heated areas.
Paraffin flow control via keypad and foot pedal.
Illuminated work area.
Two Tissue preservation boxes, paraffin nozzle.
Advanced flexible heating method, to overcome the traditional
shortcomings of excessive heating temperature, quick heating
and high precision, as well as double overheat protection, safe,
reliable and energy saving.
Large LED display allows user to see temperature without
scrolling.
Left and Right thermal Chambers, Hot plate, Forceps wells,Dispenser all individually temperature controlled.
 Light indicators keys
 Heated Holder for 6 Forceps
Stainless Steel Paraffin large tank of 3-5 litres capacity

Cold plate is used for re-cooling blocks prior to sectioning or as part of an embedding center to cool molds after paraffin dispensing.

TECHNICAL SPECIFICATION:

Quick specimen cooling.
Capacity to holds up to 100 cassettes on itslarger working
surface.
Better cooling with Teflon coating.
Environment friendly refrigerant.
Temperature: -10/-20C
Cassettes capacity: 100
Voltage: AC 110V/ 220V @ 60Hz/ 50Hz
Dimensions: 790X480X470mm

Easy to do programming interface, LCD display shows all the parameters throughout the process, such as station number & remaining time.
Automatic Tissue Processor is designed to prevent a solution to the rapid
processing of tissue Histology Laboratory. Tissue processor removes all the
water from the Tissue sample and replaces it with paraffin Wax with
optimum speed to curtail damage to the tissues caused by dehydration and
shrinkage.

TECHNICAL SPECIFICATION:
Feathertouch key pad.
Digital panel for adjusting time sequence.
12 stage timing sequence can be programmed with each step of 1 minute
to 16 hours 39 minutes (999 min.)
Delay action of 1 to 99 hours.
Thermostatically controlled wax bath.
12 tissue containers (cassettes)
2 Basket Rotor.
10 withoutlip glass beakers

Advanced Tissue Processor is designed to prevent a solution to the rapid processing of tissue in HistologyLaboratories. It removes all the water from a tissue sample and replaces it with paraffin waxwith optimum speed to curtail damage to the tissues caused by dehydration and shrinkage..

TECHNICAL SPECIFICATION-
Operated by feather touch keyboard with digital display. Display shows: Real time, date, month and year. Station no. is display in which tissue basket is
running. Station time and lapse time shown on display.
All electrical switches are silver coated and heavy duty
Leak proof wax bath
Internal parts fabricated from LM grade aluminum
Center brass rod moving on linear bearing
Heavy duty rotor motor used for agitation
Individual lids cover the glass beakers to avoid evaporation
Thread lock used after tightening the assembly screw and bolts.
Easy to clean platform
Safety device for tissue in case wax not melted the basket stop at the station
10th-11th till the temperature is not attained
Trouble free and maintenance free
Heavy gauge used in fabrication of body
Wax bath stainless steel inner outer with Teflon coated wire used in heater with
best quality heating wire with thermal cut out of 75�°C
External body powder coated to avoid chipping and anti-rusting chemical used all
moving parts moving on bell bearing oil sealed
Main motor used Korean Geared motor to avoid vibration and sound
ï?· In case of emergency side lifting handle provided to take out Tissue basket in case of
electricity failure
Tissue basket capacity of 30 and 80 according the size of the processor whether it is
1 liter or 2 liters.

Rotary head have a lock out facility at the end of run to prevent basket moving from
station 12 to station 1 10 stations with organic solvent resistant lipless beakers of 1 liter. Capacity
Minimum of 2 temperature controller wax bath of 1 ltr. Capacity
Wax bath have user definable temperature range of at least 50-65 with a high
temperature cut off at 75C ±5
Individual programmable timing sequence for each station from 1 min to 6 hrs. In increments of 1 min and programmable delay start time of up to 99 hrs.
Retain cycle information in case of power failure to continue processing on
restoration of power
weight- 54kg

Precision engineering meets cutting-edge technology in our Rotary Microtomes. Designed for precise sectioning of biological tissues, these instruments are ideal for histology, pathology, and research applications

TECHNICAL SPECIFICATIONS:

Rust proof construction.
Manual Microtome with specimen feed system.
Lockable hand wheel at any position allowing change of blade/specimen easier and safe.
Lateral knife adjustment to ensure that the entire width of the blade is used without releasing the blade clamping mechanism.
Large storage capacity on the top of the instrument for easy access of tools.
Finger protection guard to protect the used from any injuries caused due to blade.
Robust and stable base plate for max/imum stability to the microtome.
Ergonomic and user friendly design.
Section Waste tray to collect section waste and is easily removable for cleaning purposes.
High Precision Specimen feed.

Section/Trimming Thickness Range  :0.5µm-60µm

Setting Values: 0.5µm-2µm in 0.5µm increments.

2µm-20µm in 1µm increments

20µm-60µm in 5µm increments.

Minimum Setting Value: 0.5�µm

Object feed: 28mm

Vertical stroke: 60mm

Specimen horizontal feed: 28mm

Specimen Orientation: x- and y-axes  : universal 8o

Z-axis: up to 360o

Max. Specimen size-50x50mm.

Operation-Manual.

Weight-35 kg. Standard accessories: High profile disposable blades pkt of 50 nos

A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron.

Features-

Independent feed mechanism with automatic safety device,
Universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen full swing protective cover for easy cleaning and lubrication.
The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques

Feed adjustments
1-50 µm
Overall Dimensions
1 µm


Minimum thickness
1 µm
Net Weight
30 Kgs. approx.


Total Feed excursions
28mm.
Gross Weight
42 Kgs. approx

The complete unit is packed with the following accessories in a wooden case :-

Object Holders (3 Nos.)
1 Set
Lubricating Oil Bottle
1 No.


Knife 120mm in a box
1 No.
Dust Cover
1No.


Honing Stone
1 No.
Operating Manual
1 No.

Precision meets automation! Our Automatic Rotary Microtome delivers accurate, consistent tissue sections for histological analysis, streamlining your lab workflow.

Features:

LCD Display with Feather Touch Keypad
Section thickness adjustable.
Cutting/Trimming Mode
Fast Forward/Backward Function
Increase/Decrease Section Thickness
Section Counter/Section thickness display
Motorized Feed Drive
Coarse feed speed directions (in both direction) around 300µm/s 900µm/s
Ergonomic standard specimen clamp.
Sturdy knife holder with angle adjustment scale & locking lever.
Disposable knife holder with lateral displacement feature.

TECHNICAL SPECIFICATION:

Section Thickness Range : 0.5µm-100µm

Setting Values: 0.5µm-2µm in 0.5µm increments.

µm-20µm in 1µm increments

20µm-100µm in 5µm increments.

Trimming Thickness Range : 1µm-600µm

Setting Values: 1µm-10µm in 1µm increments.
10µm-20µm in 2µm increments

20µm-100µm in 5µm increments.

100µm-600µm in 10µm increments.

Minimum Setting Value: 0.5µm

Object feed: 28mm

Vertical stroke: 60mm

Specimen horizontal feed: 28mm

Specimen Orientation-x-axes and y-axes : universal 8
  Z-axis: up to 360

Max. Specimen size -50x50mm.

Operation- Manual.

Weight-  : 35 kg.

Standard accessories-: High profile disposable blades pkt. of 50 nos

Digital Thermostatic Display.
Stainless Steel Tank.
High Precise Temperature Control
High Corrosion Resistance.

MODEL- DWB4- DWB6

Column- 2 Rows 4 Holes-  2 Rows 6 Holes
Internal volume (approx.)- 18L
Temp. Range-  RT+5~99.9 C
Temp. Resolution- Accuracy ±0.5 C
Water sink-Stainless steel
Temp. control mode-  PID
Cover aperture- 120mm
Cover Ring per hole-5pcs.
Power Supply- AC 220V/ 3.6A(50/60Hz
Power rating- 800W-1200W
Inner Chamber size (LxWxH(  300 x 300 x 140 mm- 450 x 300 x 130 mm
Gross Weight- 6kg-8kg

To maintain the temperature, it can be attached in below instruments.
Viscometer Spectrophotometer Rotary Evaporator
Polarimeter Refractometer Fermentation Tank
Electrophoresis System Chromatographic Column

LCD Display.
Heating Function.
PT100 Temperature Sensor.
Both Sides folding handle for easy movement.
Overheat Protection, PID temperature Control System.
Stainless Steel Inner Tank, Water Level alarm Function.
Pump Flow rate 8L/min. & Programmable Temperature controller

TECHNICAL SPECIFICATIONS :

Temperature Range :Ambient Temperature to 100 C
Temp. resolution & Accuracy : 0.01 C & Accuracy +0.05 C
Display : LCD Display
Refrigeration- NA
Pump circulation-  Internal & External
Temperature sensor : PT100
Pump flow rate : 8 L /min
Bath Tank capacity-  10L
Tank size (LxWxD ) - 270 x 200 x 200mm
Bath Opening &-Bath depth -180 x 140 mm & 200 mm
Power Requirements- AC 220V / 50Hz
Net / Gross Weight-  12kg / 16kg

Specifications:

MODEL
MIF30T-LMIFSOT-LMIF100T


Make
LABMAN


Capacity of Ice flake (kg per 24 hrs.)
30 kg -50 kg-100 kg


Storage Capacity (kg - app.)
7 kg-15 kg-25 kg


Storage bin
ABS Plastic


Cooling Method
Air


Ambient temperature
Below 25�°C for optimum working


Construction
Stainless Steel


Noise level
a52 dB


Water Supply
3 / 4 inch BSP


Refrigerant
R290A


Input Power
180W - 280W - 420W


Power supply
Using AC 220V,50/60Hz


Dimension LxWxH (mm)
300X493X547 - 380X543X722 - 548X611X883


Gross Weight
36 kg - 45 kg - 64 kg

Salient Features:

Touchscreen Display-Continuous- Ice Flakes Output

Fully- Automatic- microprocessor- control-CFC free compressor

Noiseless operation- stainless Steel construction

Compact Design and low maintenance- Low water level Indication

Temperature- Timer Function

Front Back- Ventilation- design- stainless� Steel� Construction

Specifications:

MODEL
MIF30T-LMIFSOT-LMIF100T


Make
LABMAN


Capacity of Ice flake (kg per 24 hrs.)
30 kg -50 kg-100 kg


Storage Capacity (kg - app.)
7 kg-15 kg-25 kg


Storage bin
ABS Plastic


Cooling Method
Air


Ambient temperature
Below 25C for optimum working


Construction
Stainless Steel


Noise level
a52 dB


Water Supply
3 / 4 inch BSP


Refrigerant
R290A


Input Power
180W - 280W - 420W


Power supply
Using AC 220V,50/60Hz


Dimension LxWxH (mm)
300X493X547 - 380X543X722 - 548X611X883


Gross Weight
36 kg - 45 kg - 64 kg


Touchscreen Display Continuous Ice Flakes Output

Fully Automatic microprocessor control CFC free compressor

B- Noiseless operation- stainless Steel construction

Compact Design and low maintenance- Low water level Indication

Temperature- Timer Function

Front  Back Ventilation design- stainless Steel Construction

Specifications:

MODEL
MIF30T-LMIF50T-LMIF100T

Make
LABMAN


Capacity of Ice flake (kg per 24 hrs.)
30 kg -50 kg-100 kg


Storage Capacity (kg - app.)
7 kg-15 kg-25 kg


Storage bin
ABS Plastic


Cooling Method
Air


Ambient temperature
Below 25C for optimum working


Construction
Stainless Steel


Noise level
a52 dB


Water Supply
3 / 4 inch BSP


Refrigerant
R290A


Input Power
180W - 280W - 420W


Power supply
Using AC 220V,50/60Hz


Dimension LxWxH (mm)
300X493X547 - 380X543X722 - 548X611X883


Gross Weight
36 kg - 45 kg - 64 kg



 

Touchscreen Display- Continuous Ice Flakes Output

Fully Automatic microprocessor control- CFC free compressor


Compact Design and low maintenance- Low water level Indication

Temperature-Timer Function

Front-Back Ventilation design- stainless steel Construction

Specifications:

MODEL
LMIF200T


Make
LABMAN


Capacity (kg per 24hours)
200� kg


Storage Capacity
60kg


Display Type
Touch screen


Ice Type
Flake ice


Storage Bin Material
ABS


Cooling Method
Compressor cooling with fan cooling


Ambient Temperature
Below 25C for Optimum Working


Water Temperature (Recommended)
20C


Construction Material
Stainless steel


Noise Level & Water Supply Size
58db & 25mm


Refrigerant
R290A


Auto off
yes


Input Power
850W


Packing Dimension (LxWxH)
790 x 715 x1479 mm


Net Weight
68kg


Gross weight
78kg


;

SALIENT FEATURES
B Touchscreen Display, Timer Function. Storage Bin Detachable
Fully Automatic microprocessor control
'B' Noiseless operation, Temperature Function. B Compact Design and low maintenance.
g Continuous Ic Flakes Output.
g CFC free compressor, Base feet 8 nos.  Stainless Stee construction.
'0' Low water level Indication.
B Front & back Ventilation Design.

A Mini Centrifuge Machine is a compact and versatile laboratory device designed for the rapid separation of small liquid samples. It employs centrifugal force to spin microtubes or small containers, effectively separating liquids from solids, such as cells or precipitates. These machines are commonly used in molecular biology, biochemistry, and clinical laboratories for tasks like DNA extraction, cell pelleting, and quick sample preparation, offering a convenient and space-saving solution for various research applications.
Key Features :

Micro processor controlled, Micro-Centrifuge machine (Mini Centrifuge)
Speed range from 1000 to 10000 r.p.m. in step of 1000.
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Quiet & reliable
Small foot print
Built in power supply
High quality motors
Polycarbonate transparent cover
Supply completed with 2 standard rotors as under :

(i) Angle Rotor 6 micro centrifuge of 1.5ml capacity

(ii) Angle rotor 12 micro centrifuge tubes of 0.5ml capacity

Features:-
+A Small Volume and light weight finish.

+ Allow for high usage convenience

+16x2 LCD dispaly of set and actual time temperature

Comes with built-in temperature calibration function.
Automatic fault detection and buzzer alam function.
Having built-in over-temperature protect in device for safe and stable working.
Allows easy sleaning and disinfection.
Accessories:
Main Lead
Dust Cover
Instruction klanual
Model
S-933

Display
16 X 2 Line Alpha Numeric LCD

Display Fomat
Menu driven

Setting
By Soft Touch Keys 


Heating Devi's
Test Tube Dry Bath


Temp. Sensing Devices
RTD/ PT100I Digital Semiconductor

Range
5C above ambient to 50C

Resoluton
1C


AcCuracy
a1C


Calibraton
Manual (if required)


Block size 
24 x 12 mm Tube holders. 


Block Material
Rock solid Aluminum block


Power Supply
230 V +10% AC 50 HZ


Dimension 
190x230x92mm (LxBxH)


Weight
3kg

Features:-

-Microprocessor controller based for accurate control and regulates the high wattage heater to provide rapid heating.
- End of cycle buzzer alarm indication and heater cut off.
- Easy User Calibration.
- LED display for clear indication of temperature and time.
- Pause Function is also provided to use for a break during long operation.
- Reloaded/ Pre-programmed protection with time hold in case of power failure.
-Provide with Transparent Lid.

TECHNICAL SPECIFICATIONS:-



Model
S- 9332


Display LED DISPLAY


Display Format
Menu Driven


Setting
By Soft Touch Keys


Heating Devices
Test Tube Dry Bath


Temp. Sensing Devices
RTD/PT100/Digital Semiconductor


Range
5c above ambient to 150c


Over Heat Protection
Provide


Timer
OPerates as clock HH:MM 00:01 Minute to 23:59 (Working Hours: 24:00)


Calibration
Digital Calibration


Block Size
24 X 12 mm Tube holders


Block Material
Rock Solid Aluminium Block


Power Supply
230V, +/-10% AC, 50Hz


Dimension
260x195x150 (LXWXH In mm)


Weight
6 Kg

Ambient +5 to 150C

Block Dimension (LXW)
No. of Holes
Test Tube Size


100X100 MM
25
12.5 mm


100X100 MM
36
10.0 mm


100X100 MM
16
18.0 mm


100X100 MM
49
7.5 mm

Features:-

Microprocessor controller based for accurate control and regulates the high wattage heater to provide rapid heating.

End of cycle buzzer alarm indication and heater cut off.
- Easy User Calibration.
- LED display for clear indication of temperature and time.
- Pause Function is also provided to use for a break during long operation.
- Reloaded/ Pre-programmed protection with time hold in case of power failure
- Provide with Transparent Lid.

TECHNICAL SPECIFICATIONS:-



Model
S- 9331


Display
LED DISPLAY


Display Format
Menu Driven


Setting
By Soft Touch Keys


Heating Devices
Test Tube Dry Bath


Temp. Sensing Devices
RTD/PT100/Digital Semiconductor


Range
5�°c above ambient to 150�°c


Timer
Operates as vlock HH:MM 00:01 Minute to 23:59 (Working Hours: 24:00)


Alarm
End of Cycle Buzzer and Heater cut off


Calibration
Digital�  Calibration


Block Size
24 X 12.5 mm Tube holders


Block Material
Rock Solid Aluminium Block


Power Supply
230V, +/-10% AC, 50Hz


Dimension
260x195x150 (LXWXH In mm)


Wt
4 Kg

Ambient +5 to 150C

Block Dimension

(L X W)
No. of Holes
Test Tube Size


100X100 MM
25
12.5 mm


100X100 MM
36
10.0 mm


100X100 MM
16
18.0 mm


100X100 MM
49
7.5 mm

Special Features: once the start action in initiated, the timer programming/ process are fully protected from failure and the temperature will be maintained till end of the programmed/ set time automatically, if the power restored, at the end of cycle buzzer sound alerts at the end of process and heating would be stopped. Ease of process in timer operators as clock : HH:MM

Features: -

Small volume and light weight finish
- Allows for high usage convenience
- 16X2 LCD Display of set and actual time, temperature.
- Comes with built-in temperature calibration function
- automatic fault detection and buzzer alarm function.
- having built-in over-temperature protect in device for safe and stable� working.
- Allows easy cleaning and disinfection

 

Technical Specifications:-



Model
S- 933


Display
16X2 Line Alpha Numeric LCD


Display Format
Menu Driven


Setting
By Soft Touch Keys


Heating Devices
Test Tube Dry Bath


Temp. Sensing Devices
RTD/PT100/Digital Semiconductor


Range
5 Degree Celsius above ambient to 70 Degree Celsius


Resolution
1 Degree Celsius


Accuracy
+/- 1 Degree Celsius


Calibration
Manual (if Required)


Block Size
24 X 12 mm Tube holders


Block Material
Rock Solid Aluminium Block


Power Supply
230V, +/-10% AC, 50Hz


Weight
3 Kg

Features:

-Small volume and light-weight finish
- Allows for high usage convenience
- 16x2 LCD display of set and actual time temperature
- Comes with built in temperature calibration function
-Automatic fault detection and buzzer alarm function
- Having built-in over temperature protect in
device for safe and stable working

Allows easy cleaning and disinfection

Techincal specification :

Model
S-9330

Display 16x2 Line Alpah Numberic LCD

Dispaly format: Menu Driven

Setting: By Soft-touch Keys

Heating Devices: Test Tube Dry Bath
Temp. Sensing Devices : RTD/PT100/Digital Semiconductor

Range: 5 C above ambient to 150 C

Resolution: 1 Degree Celsius

Accuracy " +/A Degree Celsius

Calibration Manual (if required)

Block Size: 24x12 mm tube holders

Block Material: Rock Solid Aluminium Block

Power Supply : 230V+/10% AC 50HZ

Dimension: 295x227x115 (LXWXH In mm)

Weight : 4 Kg

Product Features:

DC Geared Motor Assembly.
Condensor Double Coil with S-35 Ball Joint.
Recieving Flask 1 Ltr. with S-35 Cup Joint.
Boiling Flask with 24/29 Socket (Capacity as per model).
Feeding tube for condensor.
Vapor path tube.
Digital RPM Controller for boiling flask rotation.
Digitally Temperature controlled stainless steel water bath.
Digital Timer upto 100 Hrs. (1st in Segment).
Jack arrangement for positioning glass assembly.

Model No.
KI- 2199B

Condenser Type
Horizontal & Vertical (Optional)

Rotation Speed 20-280

Timer 99:59 (HH:MM)

Display 16x2 LCD Display (RPM/ Temp. &Timer)

Temperature Ambient to 180oC (Acc. ± 2oC)

Keypad Soft Touch

Bath & Heater Capacity 4 Liters/ Double Walled

Boiling Flask Capacity Standard Supply Cap. 50ml to 3Ltr.

Drive System DC Motor

Power 220 V ± 10% 50 Hz

Dimensions 480 x 380 x 775mm

Weight 32.725 KG

Product Features:

DC Geared Motor Assembly.
Condensor Double Coil with S-35 Ball Joint.
Recieving Flask 1 Ltr. with S-35 Cup Joint.
Boiling Flask with 24/29 Socket (Capacity as per model).
Feeding tube for condensor.
Vapor path tube.
Digital RPM Controller for boiling flask rotation.
Digitally Temperature controlled stainless steel water bath.
Digital Timer upto 100 Hrs. (1st in Segment).
Jack arrangement for positioning glass assembly.

Model No.
KI- 2199A-V
KI- 2199A- 2V
KI- 2199A- 3V

Rotation Speed
20-280
 20-280
 20-280


Timer
 99:59 (HH:MM)
99:59 (HH:MM)
 99:59 (HH:MM)


 Display
 16x2 LCD Display (RPM/ Temp. &Timer)
16x2 LCD Display (RPM/ Temp. & Timer)
 16x2 LCD Display (RPM/ Temp. & Timer)


Temperature
Ambient to 180oC (Acc. ± 2oC)
 Ambient to 180oC (Acc. ± 2oC)
Ambient to 180oC (Acc. ± 2oC)


 Keypad
Soft Touch
Soft Touch
 Soft Touch


 Bath & Heater Capacity
 4 Liters (1000 Watt)
 4 Liters (1000 Watt)
4 Liters (1000 Watt)


 Boiling Flask Capacity
 1 L
 2 L
3 L


 Drive System
 DC Motor
 DC Motor
 DC Motor


 Power
 220 V ± 10% 50 Hz
 220 V ± 10% 50 Hz
220 V ± 10% 50 Hz


Dimensions
 815 x 408 x 890mm
 815 x 408 x 890mm
 815 x 408 x 890mm


 Weight
19.525 KG
 19.525 KG
19.525 KG

ROTAVAPTM state- of- the art technology, an approvingly labor- saving and a superior Rotary Vacuum Film Evaporators.The technology comes in handy to separate solvents in a mixture and our product provides an exceptionally high bath volume of 4L. Keeping intricacies in mind,the product has been designed to make it available for a diverse range of organic, pharmaceutical, F& B, chemical and analytical labs.Model 2198 is detailed to have microprocessor-based controllers, programmable temperature controller, and with a vivid FND display, our evaporators stand out to give the finest and clear-cut precise performance.
Model No.
KI- 2198-H
KI- 2198-2H
KI- 2198-3H


 Rotation Speed
20-280
 20-280
 20-280


 Timer
NA
 NA
NA


 Display
 FND Display (Only For Temp.)
 FND Display (Only For Temp.)
 FND Display (Only For Temp.)


 Temperature
 Ambient to 180oC (Acc. ± 2oC)
Ambient to 180oC (Acc. ± 2oC)
 Ambient to 180oC (Acc. ± 2oC)


Keypad
 NA
 NA
 NA


 Bath & Heater Capacity
 4 Liters (1000 Watt)
 4 Liters (1000 Watt)
 4 Liters (1000 Watt)


 Boiling Flask Capacity
 1 L
 2 L
 3 L


 Drive System
 DC Motor
 DC Motor
 DC Motor


 Power
 220 V ± 10% 50 Hz
 220 V ± 10% 50 Hz
 220 V ± 10% 50 Hz


 Dimensions
 815 x 408 x 890mm
 815 x 408 x 890mm
815 x 408 x 890mm


Lift
Hand Operated
Hand Operated
Hand Operated


Glassware
Included
Included
Included

Inner Tank & Outer body made of Stainless Steel.
Digital Control.
RED LED display.
Heating Temperature RT+5 ~ 80 C.
Temperature with timer function.
Drainage and cool fan available in 6L to 24L.
LID & Basket as Standard Supply.

TECHNICAL SPECIFICATIONS :

Tank Capacity (Approx.)  8L  24L
Tank Size (mm) 240x140x100 300 155 150 300 240x150 330 300 150 500 300 200
Ultrasonic Power   100W  150W   200W 300W  500W
Heating power   100W  300W  300W    400W   500W
Tank Drain Drain Valve
Time Setting  1-99 min.
Heating Temp.  RT. +5 ~ 80 C
Display Digital  RED LED
Frequency 40kHz
Lid Material &a Inner Tank Material  SS 304
Outer Tank Material SS 201
Power Supply AC 220V / 50 Hz
Weight (approx.) 7.5 kg   9 kg   12 kg  17 kg

Digital control with LED display.
5 recycle digital timer, 90, 180, 280, 380 , 480 seconds.
Overheating protection function.
Degas function is available to improve cleaning efficiency.
Built-In cool fan for steady and safe working.
Detachable power cord.

TECHNICAL SPECIFICATIONS :

Tank Capacity- 2.5L
Ultrasonic Power-  65W
Heating Power - 100W
Degas Function-  Yes
Timer -  5 cycles: 90s-180s-280s-380s-480s
Ultrasonic Frequency -  40 kHz
Tank Material Stainless Steel-SS304
Tank Size- (LWH) 245x155x80 mm
Overall Size- (LWH) 305x235x215 mm
Display-Digital control with LED display
Heating Temperature : Ambient to 60
Power Supply -  AC 220V / 50-60Hz
Gross Weight-3 kg

Touch screen display - 4.3 inches TFT.
User Password Protection available.
Microprocessor controlled and completely programmable.
Large LCD display with Time setting .
Temperature Indicator and controller.
Auto-tuning for convenience and optimal processing efficiency.
Variable Power Output control.
Auto frequency tracking.
Output amplitude 0-100% adjustment.
Automatic fault alarm.

TECHNICAL SPECIFICATIONS :

Frequency-20-25KHz - Automatic tracking
Process capacity-0.5-500ml (approx.)
Standard Probe-: (Titanium Alloy) 6mm (1/4") Standard
Display- 4.3 inches TFT
Display Function-Temperature, Power, Time, etc.
Temperature range-( 0-99C)
Timer (Selectable) -  Yes
Overload Protection - Yes
User Password Protection :-  Available
Input method & Data Memory : Touch screen control &- 20 groups
Output Power- 6.5-650W (adjustable)
Power supply-  : AC 220V /50HZ
Dimension LxWxH & Weight -  490 x 370 x 280mm & 10 kg + 5kg (Sound Proof Enclosure)

Ip67 Waterproof level, can float on the water surface.
Electrode module can be replaced.
Long Life Use.
Double-line LCD display.
Auto OFF Function.
Accurate pH measurement.

SPECIFICATIONS

Measuring Parameter : pH / C
pH Range : 0.0 to14.00pH
pH Resolution & Accuracy : 0.01pH & + 0.05pH
Calibration Point-  1 - 3 points, Auto Calibration
pH Buffer Option - (USA) pH 4.01, 7.00, 10.01
Temperature compensation-  Yes
Temp. range & Resolution -  0.0-99.9 &0.1C
Temperature Accuracy : +0.5C
Ambient temperature -  10C -50C
Display-Double-line LCD display
Auto OFF -  After 6 minutes, if not in use
Battery -  4 x 1.5V coin cell batteries
Dimension & Weight : 170 x 37 x 37mm & 90g

Stable and accurate measurement.
Fast detection speed.
Small size, easy to carry.
Auto OFF Function.
LCD Display.
Easy to use for Non Technical Person.

SPECIFICATIONS
Pocket pH Tester - TPH1
Measuring range-0.00-14.00pH
Resolution- 0.01pH
Measurement accuracy -±0.05pH
Calibration point- 1 point , pH7.00
Buffer Type-USA
Buffer Option - pH 4.01, 7.00, 10.01
Display -  LCD
Automatic Power OFF -  After 6 minutes, if not in use
Ambient Temperature-10C -50C
Battery -  2 x 1.5V button batteries
Packing Dimension -  (LxWxH) 155 32 15mm
Gross Weight -  54g

High Stability and Accuracy
Slop Control
3.5 Digit LED Display
Properly Tested

Technical Specifications:- 



Model No.
S- 902


Display
4-digit LED


Resolution
0.01 pH, 1 mV


Range
0 to 14.00 pH, 0 to =1999 mV


Calibration
3 Point (4pH, 7pH and 902pH))


Accuracy
 0.01 pH,  1 mV


Temperature
Auto 0 to 100 Degree Celsius


Slope Correction
80 to 120% Auto Ranging


Power Supply
230V, 10% AC, 50 Hz


Dimension
195X225X65 mm (LXBXH)


Weight
2 KG

Accessories:

Combination pH Electrode
Buffer Tablets (4pH, 7pH and 902pH)
pH Electrode Stand
Temp. Probe
Instruction Manual
Dust Cover
12V DC Adapter

Digital PH Meter are on top of people's priority due to their fantastic quality and high durability. They are fabricated with the help of perfect raw materials and international standard technology. Our engineers, R & D team and experts manufacturer digital PH meters of complete international standards. Customized solutions and customer centric approach is our top priority and business policy. Features consist of High stability and accuracy Auto facility (S-902) Slope control 3.5 Digit LED display Various available designs Properly tested..

Technical  Specifications:-

Model No.
S- 901


Display
3.5-digit LED


Resolution
0.01 pH, 1 mV


Range
0 to 14.00 pH


Calibration
2 Point (4pH, 7pH)


Accuracy 0.01 pH, + 1 mV


Temperature
Manual 0 to 100 Degree Celsius


Slope Correction
80 to 120%


Power Supply
230V, + 10% AC, 50 Hz


Dimension
280X180X88 mm (LXBXH

Weight
3 KGS

Accessories:

Combination pH Electrode
Buffer Tablets (4pH, 7pH)
pH Electrode Stand
Instruction Manual,
Dust Cover

Automatic Temperature Compensation (ATC).
There is a microprocessor chip inside the meter and the appearance of meter looks
nice with user friendly operation.
Large LCD display with blue background simultaneous display of pH and temperature.
It has intelligent functions for calibration, data storage / Memory (Upto 25 prints).
Automatically display the percentage of slope after calibration is over.
Equipped with electrode holder and calibration buffer, which is more convenient to use

Portable pH meter - LCD display with white Back Light.
1 to 3 points calibration with automatic recognition for USA and NIST buffers.
Automatic electrode diagnosis helps the user to decide whether to replace the pH electrode.
Automatic temperature compensation ensures accurate readings over the entire range.
Auto-read function senses and locks the measurement endpoint.
Auto-power OFF effectively conserves battery life.
Setup menu allows setting the pH buffer set, number of calibration points, temperature unit.
Reset function automatically resumes all settings back to the factory defaults.
Expanded memory stores or recalls up to 100 data sets.
USB Interface for data transfer or connecting a power adapter to the meter.
Automatic shutdown - After 15 minutes, If not in use.
Carrying Case is Standard supply
 MODEL
PPH10

pH Range
2.00 to 20.00 pH


pH Resolution
0.01 pH

Polarographic Dissolved Oxygen Electrode easy to use.
Portable Dissolved Oxygen meter is equipped with a backight LCD display.
1 or 2 points calibration using the air-saturated water or zero oxygen solution.
Salinity and barometric pressure compensations eliminate the measurement errors.
Automatic temperature compensation ensures accurate readings over the entire range.
Auto-read function senses and locks the measurement endpoint.
Auto-power OFF effectively conserves battery life.
Setup menu allows setting the number of calibration points, temperature unit, etc.
Reset function automatically resumes all settings back to the factory defaults.
Expanded memory stores or recalls up to 100 data sets.
USB communication interface for data transfer or connecting a power adapter to the meter.
Battery Life : Approximately 150 hours without backlight.
Automatic shutdown - After 15 minutes, If not in use
Carrying Case is Standard Supply

Dissolved Oxygen Range -  0.00 to 20.00 mg/L, (ppm)
Dissolved Oxygen Resolution : 0.01 mg/L, (ppm)
Dissolved Oxygen Accuracy-±0.5 mg/L, (ppm)
Saturation Range -  % 0.0 to 200.0%
Saturation Resolution : 0.1%
Saturation Accuracy -±2.0%
Calibration : 1 or 2 points
Temperature Compensation - 0 to 50C / 32 to 122F, automatic
Pressure Correction - 60.0 to 113.3 kPa / 450 to 850 mmHg, manual
Salinity Correction -  0.0 to 50.0 ppt, manual
Display -  LCD
Hold Function Selectable : - Manual or Automatic hold after measurement end point
Auto-Power OFF-  15 minutes, if not in use
Carrying Case- Available
Reset Function-  Yes
Date & Time -  Yes
Memory  : Upto 100 data readings
Connector- 6-pin mini-DIN
Communication : USB Interface
Power Supply : 3 1.5V AA batteries or 5V DC power adapter
Packing Dimension : (LxWxH)mm 350 100 300mm
Net / Gross Weight -  300g/ 1.5kg

Ip67 Waterproof level, can float on the water surface.
Polarographic DO Electrode module can be replaced.
Auto OFF Function.
Double Line LCD Display.
Temperature Compensation.
Long Life Usage.

Applications- 
Laboratories, Environmental Monitoring, Food processing,
conventional Water or Wastewater, Chemical industry,
aquaculture, Aquariums, Swimming Pools.

TECHNICAL SPECIFICATIONS :

DO Range- 0.0-19.9mg/l (ppm)
DO Resolution : 0.1mg/l (ppm)
DO Accuracy-+0.5mg/l (ppm)
DO Calibration Points - 2 points
Temperature Compensation : 5-45 C (Auto)
Temperature Range : 0.0-99.9 C
Temperature Resolution : 0.1 C, Accuracy +0.5 C
Ambient Temperature : 10-50 C
Calibration Reminder-Yes
Display : Double Line LCD display
Auto OFF - After 10 minutes, if not in use
Battery- 4 x 1.5V coin cell batteries
Dimension (LxWxH) & Weight 170 x 37 x 37mm & 90g

Highly Stable & Accurate
16X2 Line Alphanumeric LCD
1000 Samples Storage Facility
PC Interface Facility
Auto/Manual Calibration
D.O. & Temperature Measurements
Soft Touch Membrane Type Keys

Technical Specifications:-

Model
S- 955


Display
16X2 Line Alphanumeric LCD With Backlit


Range
DO: 0-20 ppm, Temp. 0-100C


Resolution
DO: 0.1 ppm, Temp.: 0.1C

Accuracy
DO: +0.2 ppm, Temp.: + 0.2C

Temp. Comp.
0-50C (Auto/Manual)

Key Board
8 Keys, Soft Touch Membrane Type

PC Interface
RS 232

Storage
Up to 1000 Samples

Power Supply
230V, + 10% AC, 50 Hz

Dimension
195X225X65 mm (LXBXH)

Weight
2 KG

 Accessories:

D.O. Probe
Temperature Probe.
D.O. Membranes
12V DC Adapter
Operation Manual
Dust Cover
RS 232
Software CD

Visual Colorimeter is a kind of Visual colour measuring Instrument.
It measures colour scale unit which is an International acknowledged
specific colour method, as a standard to measure the colority of liquid, gelatin, solid and powder samples.

Visual measurement of colour matching to determine material colour
Design in conformity with internationally accepted colour scale unit
Simple structure and easy to operate
Replaceable sample chamber liner
Replaceable light source, two spares Incandescent lamps.
Viewing system fully adjustable

TECHNICAL SPECIFICATIONS

Measuring principal :�  Visual, in terms of International colour scale units
Modes : Transmittance, reflectance
Measurments range :�  0.1 â?? 79.9 Red, 0.1 â?? 79.9 Yellow, 0.1 - 49.9 Blue, 0.1 - 3.9 Neutral
Resolution : 0.1 colour scale unit
Viewing system Fully adjustable
Light Source- Incandescent lamp
Illuminant -  Approximates to daylight
Path Length -  Up to 180 mm
Diffuse reflectivity of White plate - > 80%
Amplification of the magnifiers- 1.9 X
Dimension of Colorimetric untensil- 10x20x40mm, 25.4x20x40mm, 133.4x20x40mm
Power Supply & Power Watts-  AC 220V/50Hz & 50W
Dimension- 620x440x300mm
Weight- 12.5 kg

Auto Photo Colorimeter is a compact and easy to operate instrument for Photo Colorimeter analysis of any concentration.

Features:

Accurate, Direct Readout of Absorbance
Rugged, Reliable & Easy to Operate
Long Life Photo Diode Detector
1 ml Sample Size

Technical Specifications:-



Model
S- 912


Std. glass Filter
8 No.


Minimum Volume
1 ml


Display
3 Digit LED


Range
400-700 nm


Output
OD (0 to 1.99)


Resolution
OD: 0.01


Accuracy
+ 0.5% FSI


Detector Photocell
Photodiode


Light Source
3.5V, 100mA


Power Supply
230V, + 10% AC, 50Hz


Filters
8 Filters- 400, 420, 480, 500, 520, 540, 620, 680 nm


Battery Backup Facility
Optional


Dimension
195X230X95 mm(LXBXH)


Weight
3KG



Accessories:-

Test Tube (Set of 5)
Dust Cover
Instruction Manua

Features:-

Accurate, Direct Readout of Absorbance
Rugged, Reliable & Easy to Operate
Long Life Photo Diode Detector
1 ml Sample Size
Soft Touch Membrane Keys

Technical Specifications:-
Model
S- 9120

Range
400 -700 nm

Accuracy
0.01 O.D., 0.01% T


Stability
0.02 O.D. Per Hour


Light Source
Highly Accurate Laser Source


Volume
1 ml. Minimum


Dimension
195X215X95 mm (LXBXH)


Battery Backup
6 V DC Re-chargeable Battery (optional)

Display
Digital LCD (16X2 Alphanumeric)

Display Model
Absorbance, Transmission & Wavelength

Power Supply
230V, 10% AC, 50Hz

Filters
Built in 9 Digital Filters 50,000 hours Life

Filter Wavelength
400 nm, 430 nm, 480 nm, 500 nm, 520 nm, 540 nm, 580 nm, 620 nm, 680 nm

Weight
1.5 Kg. Approx.

Accessories:-

Test Tube (Set of 5)
Dust Cover
Instruction Manual
Adapter

Microprocessor Flame Photometer Are used for the determination of sodium, potassium, calcium and lithium. They use the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility.

Features:-

Useful for both ppm and meq application
Measurement of four elements with single aspiration .Automatic filter selection
Curve fitting software (up to 5 standards)
Collaboration stored in memory
Re-standardization facility with only one standard
User friendly menu driven software
Help key available at each & every operating step.

Technical Specification:-

Model
S-935

Range
General
Serum
Urine

Na: 0-100 ppm

Upto 250 meq/l, 1: 100  dil

K: 0-100 ppm

Upto 250 meq/l, 1: 100 dil

Ca: 0-100 ppm

Upto 250 meq/l, 1: 100 dil

Li: 0-100 ppm

Upto 250 meq/l, 1: 100 dil
Na:- 0-200 

1:100 dil

K: 0-10

1: 100 dil

Li: 0-2

1: 5 dil
Na: 0-250&

1: 100 dil

K: 0-100

1: 100 dil

Ca: 0-10

1:2 dil

Sensitivity
Na: 0.5 ppm, K: 0.5 ppm,

Ca: 15 ppm (Optional), Li: 50 ppm (Optional)

Resolution
0.1 ppm/meq

Accuracy
2 % Error when 3 ppm Na/K and 5 ppm

Li are set as maximum standards


Display
Graphical LCD With Backlit


Average Time
In-built in software


Calibration
Up to- 5 Point Calibration with Curve Fitting Software


Gas Control
Adjustable With Knobs


Atomizer
Axial Flow Type


Ignition System
Auto Ignition System


Repeatability
+/- 2 Counts


Detector
Silicon Photodiode


Filters
Narrow Band Interference Glass Filters
Flame System
LPG and Dry Oil Free Air


PC Interface
USB Port


Power Supply
230V, +/-10 % AC, 50 Hz


Weight
7.5  Kg (APPROX)

Accessories
Instrument with Na & K Filters, Sample Holders, Instruction Manual, Dust Cover, Main Lead, Air and Gas Tubing along with end Damps, Capillary Tubes, Chimney, Cleaning Wires, Drain Pipe etc.

Digital Flame Photometer S-931 manufactured by us boast of top-notch quality. Supreme quality raw materials and properly updated technology is utilized for manufacturing them. Durability, longevity, strength, perfect designs are their highlights. Our top notch quality experts, R&D team and engineers, are responsible for developing products, with the latest trend in sight.

Technical Specifications-

Model
S-931

Range
Na: 0-100 ppm, K: 0-100 ppm

Ca: 15-100 ppm (optional), Li: 10-100 ppm (Optional)

Sensitivity
Na: 5 ppm, K: 5 ppm

Ca: 10 ppm (Optional), Li: 10 ppm (Optional)

Readout
2.5 Digit Bright Red LED Display

Accuracy
+/- 2 % upto 40 ppm +/- 5% above 40 ppm

Ignition System
Auto Ignition System

Dimension
385X245X200 mm (LXBXH)

Measurement System
Measures one Eleent at a time


Repeatability
+/- 2 Counts


Detector
Silicon Photodiode


Filters
Narrow Band Interference Glass Filters


Nebulizer
Black Bakelite, Axial Flow Type


Flame System
LPG and Dry Oil Free Air


Warm up Time
Time 10 Minutes


Power Supply
230V, +/-10 % AC, 50 Hz


Weight
7.5 Kg (APPROX)

Accessories:-

 Instrument with Na & K Filters
Sample Holders
Instruction Manual
Dust Cover
Main Lead
Air and Gas Tubing along with end Damps
Capacity Tubes
Chimney
Cleaning Wires
Drain Pipe
Air Compressor

Microprocessor Water and Soil Analysis Kit S- 959 measures 8 parameters like pH, Conductivity, TDS, DO, Salinity, Temp, mV, Turbidity. It has perfect durability and longevity which can be stored up to 1000 samples. Mains cum battery operated. Fitted in briefcase having soft touch membrane keys.

Features:

pH, Conductivity, TDS, DO, Salinity, ORP, Temperature Measurements.
Highly Accurate & Stable
User Friendly & Menu Driven Software
16X2 Line Alphanumeric Jumbo LCD
PC Interface Facility
Interfacing Port RS 232

Technical Specification-

Model
S- 959


Product Name
µP Water and Soil Analysis Kit

Display
16X2 Line Alphanumeric Jumbo LCD

pH

Range
0-14 pH

Resolution
0.01 pH

Accuracy
± 0.01, + 1 Digit


Temp. Comp.
0-100C, (Auto/ Manual)


Conductivity


Range
0-20, 0-200

0-2, 0-20, 0-200 mS, 0-1000 mS


Resolution Selection
0.01 S


Accuracy
+ 0.5% FS, + 1 Digit

Cell Constant
0.05-10.5, Adjustable

Temp. Comp.
5-50C (Auto/Manual)


Reference Temp.
5-50C (Auto/Manual)


Temperature


Range
0-100C


Resolution
0.1C


Accuracy
+ 0.1C, + 1 Digit

Sensor
PT-100 (RTD Probe)

TDS

Range
0-20, 0-200 ppm

0-2, 0-20, 0-200 ppt, 0-1000 ppt

Range Selection
Automatic

Cell Constant
Adjustable

Resolution
0.01 ppm

ORP

Range
0-+1999.9 mV

Resolution
0.1 mV

Accuracy
+0.1 mV, + 1 Digit

Salinity

Range
0-20, 0-200 ppm

0-2, 0-20, 0-50 ppt

Resolution
0.01 ppm

Accuracy
+ 1% of range, + 1 Digit

DO

Range
20 ppm

Resolution
0.1 ppm

DO Sensor
Gold/Silver Probe

Temp Comp.
Auto/Manual (50C)

Turbidity

Range
0-1000 NTU

Resolution
1 NTU

Sample System
30 mm Clear Glass Tube

Power Supply
12V Rechargeable Battery or 12V/2 AMP Adaptor

Accessories:-

pH Electrode
Cond/TDS/ Cell
Probe
DO Probe
DO Membranes
Tables 7pH & 4pH
12V Adapter
Software CD
RS 232 Cable

Microprocessor Water and Soil Analysis Kit S- 967 measures 7 parameters like pH, Conductivity, TDS, DO, Salinity, Temp, mV,It has perfect durability and longevity which can be stored up to 1000 samples. Mains cum battery operated. Fitted in briefcase having soft touch membrane keys.

Features-
pH, Conductivity, TDS, DO, Salinity, ORP, Temperature Measurements.
Highly Accurate & Stable
User Friendly & Menu Driven Software
16X2 Line Alphanumeric Jumbo LCD
PC Interface Facility
Interfacing Port RS 232

Technical Specifications-

Model
S- 967

Product Name
P Water and Soil Analysis Kit

Display
16X2 Line Alphanumeric Jumbo LCD

pH


Range
0-14 pH

Resolution
0.01 pH

Accuracy
+ 0.01, + 1 Digit

Temp. Comp.
0-100C, (Auto/ Manual)

Conductivity

Range
0-20, 0-200 µS0-2, 0-20, 0-200 mS, 0-1000 mS

Resolution Selection
0.01 µS

Accuracy
+0.5% FS, + 1 Digit

Cell Constant
0.05-10.5, Adjustable

Temp. Comp.
5-50C (Auto/Manual)


Reference Temp.
5-50C (Auto/Manual)

Temperature

Range
0-100C

Resolution
0.1C

Accuracy
+ 0.1C, +1 Digit


Sensor
PT-100 (RTD Probe)

TDS

Range
0-20, 0-200 ppm,0-2, 0-20, 0-200 ppt, 0-1000 ppt

Range Selection
Automatic

Cell Constant
Adjustable

Resolution
0.01 ppm

ORP

Range
0-+1999.9 mV


Resolution
0.1 mV


Accuracy
+0.1 mV, + 1 Digit


Salinity


Range
0-20, 0-200 ppm0-2, 0-20, 0-50 ppt


Resolution
0.01 ppm


Accuracy
+ 1% of range, + 1 Digit

DO


Range
20 ppm


Resolution
0.1 ppm


DO Sensor
Gold/Silver Probe


Temp Comp.
Auto/Manual (50�°C)



Accessories:-

pH Electrode
Cond/TDS/ Cell
Probe
DO Probe
DO Membranes
Tables 7pH &4pH
12V Adapter
Software CD
RS 232 Cable
Operation Manual

Pocket Multiparamter is a portable multi para tester used in Water & Waste Water Treatment Electroplating Rinse Tanks, Drinking WaterHydroponics, Aquaculture, Aquariums, Fish Farms, Swimming Pools etc..

Features :

Ip67 Waterproof level, can float on the water surface.
pH, Conductivity, TDS, Temp. Functions.
Electrode module can be replaced, Long Life Usage.
Auto OFF Function.
Double Line LCD Display.
Temperature Compensation.
4 x 1.5V coin cell batteries.

TECHNICAL SPECIFICATIONS -
Pocket Multipara Tester - TMP8
Parameter -  pH, Conductivity, TDS, C
pH Range - 0.00-14.00pH
pH Resolution- Accuracy 0.01pH &+0.05pH
Calibration Points-  1 - 3 points auto, pH4.01, 7.00, 10.01
Conductivity Range -  0-1999S/cm
Cond. Resolution & Accuracy -  1S/cm & +2% FS
Cond. Calibration Points  : 1 point, 1413�¼S/cm
TDS Range-  0-1000 mg/l (ppm)
TDS Resolution & Accuracy  : 1 mg/l (ppm) &+ 2% FS
Temp. Range-  0.0-99.9C
Temp.Resolution & Accuracy- 0.1C +0.5C
Ambient Temperature-  10C to 50C
Dimension -Weight-: 170 x 37 x 37mm & 90g

Product Description

LABMAN LMION40 ion meter is designed for high performance and easy operation. The meter is capable of measuring up to 7 parameters, including�  ION concentration,pH, ORP Conductivity, TDS, Salinity, Resistivity, and temperature.

Features:

Ion concentration mode directly displays readings in ppm, ppt, or any other units of your choice
Calibrate up to 2 points for pH using USA or NIST buffer sets; Up to 5 points for ion concentration measurement
Auto-buffer recognition eliminates calibration mistakes and ensures calibration accuracy
Automatic temperature compensation for best accuracy under fluctuating temperatures
Meters automatically calculate and display electrode slope
Automatic message prompts help you easy to operate meter.
Expanded memory stores and recalls up to 99 data sets
USB Communication interface can be sent data to computer
During the ion mode, 2 to 5 points push-button calibration from low to high concentrations
Direct readout ion concentration simplifies the elaborate measurement process.
Automatic Temperature Compensation (ATC) ensures highly accurate measurements over the entire range.

TECHNICAL SPECIFICATIONS

Ion Concentration Range-0.001~19999 ppm,mg/L,mol/L

Ion Concentration Accuracy +0.5% Full Scale (Monovalent),+1% Full
pH Range-2.000 to 20.000pH
pH Resolution -0.001pH
pH Accuracy-0.002pH
Calibration Points :5 points, NIST(pH4.00/6.86/9.18) or USA(pH4.01/7.00/10.01]

mV/ORP Range : 0 to +1999.9mV
mV/ORP Accuracy +0.2mV
Temperature Compensation: 0.0 to 100.0C, Manual or Automatic
Conductivity Range : 0 to 1.999,19.99,199.9,1999 S, 19.99, 200.0mS
Conductivity Accuracy : 0.5% F.S
Calibration Points : 1 point per range
Temperature Compensation : 0 to 50C, Manual or Automatic
Cell Constant : 0.1,1.0,10 adjustable
TDS Range : 0 to 100 ppt, Max.200 ppt
TDS Conversion Factor : 0.01 to 1.00, Default 0.67
Salinity Range : 0 to 50 ppt, 0.00 to 5.00%
Resistivity Range and Accuracy : 0 to 100M, W - 1%
Temperature Range : 0.0 to 100.0C,
Temperature Accuracy :+0.3C
Memory & Output : 99 data sets with date/ time stamping, USB
Weight -  1.75 kg

LABMAN LMMP-30 water quality meter is designed for high performance and easy operation. The meter is capable of measuring up to 7 water quality parameters,
including pH, ORP Conductivity, TDS, Salinity, Resistivity, and temperature.

MULTI-POINT PUSH-BUTTON CALIBRATION
The meter has multi-point calibration mode. From setup menu, choose calibration
and immerse electrode into indicated calibration solution, press ENTER key and
meter is automatically calibrated.
AUTO-BUFFER RECOGNITION
During calibration, if the calibration solution or selected value does not match the
meter\'s indicated value, an ERROR message is displayed.
VIEWING OF ELECTRODE SLOPE
After calibration, the percentage slope of the electrode is displayed before the
meter returns to measurement mode. Per the slope value, user decides whether to
change the electrode.
AUTOMATIC TEMPERATURE COMPENSATION� : By using temperature probe
AUTO-RANGING FOR CONDUCTIVITY
The meter has auto-range functions for measuring conductivity and total
dissolved solids (TDS). Upon immersing conductivity sensor into sample
solution, the screen immediately displays the value in appropriate
measurement range for accuracy,

ADJUSTABLE TEMPERATURE COEFFICIENT
Various ions in solution have different temperature coefficients.
LABMAN-LMMP30. can set the temperature coefficient between 0 and
3.9% in degrees centigrade for optimum accuracy.
ADJUSTABLE CELL CONSTANT
The meter has three cell constants for measuring requirements. Once a
cell constant has its calibration set, it is saved and does not require
re-calibration when switching meter.
MESSAGE INDICATOR
LABMAN-LMMP30 displays helpful messages like an on-screen manual for
easy operation of this meter and selection of the various options.
SAVE AND COMMUNICATION INTERFACE
The meter all has real-time date/clock stamps. The memory stores up to
99 discrete data sets. Press the SAVE key to store the current measured
values and it automatically generates a serial number with the date
and time. This data can then be sent to a computer via the USB port

TECHNICAL SPECIFICATIONS

pH Range-  -2.000 to I6.000pH
pH Resolution +0.001pH
pH Accuracy -±0.002pH
Calibration Points :2 points, NIST(pH4.00/6.86/9.18) or USA(pH4.01/7.00/10.01]

mV/ORP Range : 0 to+1999.9mV
mV/ORP Accuracy :+0.2mV
Temperature Compensation: 0.0 to 100.0C, Manual or Automatic
Conductivity Range : 0 to 1.999,19.99,199.9,1999 S, 19.99, 200.0mS
Conductivity Accuracy : + 0.5% F.S
Calibration Points : 1 point per range
Temperature Compensation : 0 to 50�°C, Manual or Automatic
Cell Constant : 0.1,1.0,10 adjustable
TDS Range : 0 to 100 ppt, Max.200 ppt
TDS Conversion Factor : 0.01 to 1.00, Default 0.67
Salinity Range : 0 to 50 ppt, 0.00 to 5.00%
Resistivity Range and Accuracy : 0 to 100M, W+ 1%
Temperature Range : 0.0 to 100.0C,
Temperature Accuracy : +0.3C
Memory & Output : 99 data sets with date/ time stamping, USB
Weight - 1.75 kg

Turbidity meter LMTB200 with TSS measurements mode,selectable four turbidity units
Turbidity meter is equipped with a 4.5" TFT display
2 to 7 points calibration using the formazin standards
Selectable four turbidity units,including the NTU,FNU,EBC and ASBC
TSS conversion factor ensures accurate measurement for total suspended solids
Contiuous measurement mode that can used for indexing and matching the sample vials
Hold fuction freezes current reading for easy viewing and recording
Password protection prevents the unathorised calibration and settings
Help message as a operational guide that helps user quickly begin using the meter
System menu allows setting the 9 parameters,including the date and time,resolution etc..,
Reset feature automatically resumes all settings back to factory default settings

Portable Turbidity meter, has Principle Nephelometric Method (90)
2 to 5 points calibration, using formazin standards.
Selectable of 4 Turbidity units NTU, FNU, EBC, ASBC.
Single measurement mode, automatically identify and lock the measurement end.
Continuous measurement mode for indexing or matching vials.
Automatic Power OFF, effectively save battery energy consumption
Settings menu to customize the number of calibration points, date and time, display resolution etc...
Reset function, automatically restore the meter to factory default settings.
Expand memory to store or retrieve up to 100 sets of data.
USB communication interface, easy to transfer data or connect power adapter to the meter.
Automatic shutdown - After 15 minutes, If not in use
Carrying Case is Standard Supply

Principle-  Nephelometric Method (90)
Turbidity Measuring range-0~1100 NTU/0~275 EBC/0~9999 ASBC
Display resolution -0.01 (0~99 NTU), 0.1 (100~999 NTU), 1 (1000~1100 NTU)
Measurement accuracy -2% (0~500 NTU),+3% (501~1100 NTU)
Calibration point -  2 to 5 points (0.02, 10, 200, 500, 1000NTU)
Calibration Standard value : 200, 500, 1000 NTU
4 turbidity units-  NTU, FNU, EBC and ASBC.
Light source-  Infrared light-emitting diode, 850nm
Detector : Silicon photoelectric
Stray light : ; 0.02 NTU
Vial size -  60 (height) 25 (diameter) mm
Sample Volume : (approx.) 30ml
Carrying Case- Available
Auto-Power OFF : Yes
Display -  LCD
Data storage : 100 data readings
Ambient Temperature -  10 C~ 40 C
Interface- USB
Power supply type - AA battery 3 cells or DC5V power adapter
Packing Dimension -  (LxWxH) 280 x 80 x250 mm
Net / Gross Weight : 300g / 1.5kg

Microprocessor Nephelo Turbidity Meter S-968 is

Highly Stable & Accurate
4 Digit 7 Segment LED
30 mm Flat Bottom Test Tube
0 to 400 NTU
Higher Durability and Long Life
Tested on Quality Parameter

Technical Specifications-

Model
S- 968

Range
0-400 NTU (in 5 Ranges), 0-2, 10, 100, 200, 400

Resolution
1 NTU

Accuracy
+/- 3% FS, +1 Digit

Display
4 Digit 7 Segment LED

Light Source
3 V, 0.3 Amp LED Lamp

Detector
Photodiode

Sample System
30 mm Clear Glass Test Tube

Power Supply
230V, +-10% AC, 50 Hz

Dimension
195X230X95 mm (LXBXH)

Weight
3 KG

Accessories:-

Test Tube Set of 3
Operation Manual
Dust Cover

Microprocessor Turbidity-Temp. Meter S-966

Highly Stable & Accurate.
16 Character X 2 Lines Alphanumeric LCD.
30 mm flat bottom Test Tube.
0 to 1000 NTU
Automatic Range Selection.
Higher durability and long life.
Tested on quality parameters.
1000 Samples Storage with Date &Time.
Measurement of Temp. and Turbidity.

Technical Specifications:-

Model
S- 966

Turbidity
Range
0-1000 NTU
Resolution
1.0 NTU in lowest Range
Range Selection
Automatic
Accuracy
+3%, FS+1 -digit

Detector
Photodiode

Sample System
30mm Clear Glass Test Tube

Light Source
3.6 V/ 100ma LED

Calibration
Manual

Temperature

Range
0C to +100C

Resolution
0.1c

Accuracy
+0.2%

Input Type
Pt 100

Calibration
Auto/Manual

Display
16 Character X 2 Lines Alphanumeric LCD

Display Format
Temp &Turbidity Simultaneously

Setting
By Soft Touch Keys

Storage
1000 Samples With Date & Time

PC Interface
RS-232

Real Time Display
24 Hour Mode With Date

Power Supply
230 V +-10% Ac 50 Hz Dimension 198x238x103mm

Weight
3 kg.
Accessories-

Test tube (Set of 5)
Operation Manual
Dust Cover

Silent Features:

COD Analyzer is water quality analyzer.

LCD display screen.

21 samples at a time.

2-point calibration.

by USB communication interface.
Specifications:

MODEL
COD1500


Make
LABMAN

Range
(0-150)mg/L,(0-1500)mg/L

Accuracy
5%


Repeatability
3%

Display
LCD

Calibration
2 points

Fluctuation
+ 6mg/L (20min)

Data
Store 200 sets of measuring data which follows GLP norm

Interface
USB

Power Supply
Adaptor, Using AC 220V,50/60Hz

Dimension
315-225 100 mm

Gross Weight
2kg

Temperature range 
0-165C


Temperature control accuracy
+2C

Temperature field homogeneity 
43C

Timer range
0-120 minutes

Timer control accuracy
2%

Time repetitive 
+1%
Environmental Condition
10C - to 40C,

Relative Humidity 
80%h

Power Supply
Adaptor, Using AC 220V,50/60Hz

Packing dimension (L x W x H)
330X230X130mm

Weight
4 kg

Measuring  principle:  differential  pressure  (manometric)

The BOD value of the current test can be read at all times during or after the incubation of 5 days.

BOD measurement ranges of uo to 4000 mg/I can be measured using different sample volumes.

Specifications.

MODEL
BOD4000


Make
LABMAN


Parameters
BOD5


BOD Range
0-4000mg/L


Accuracy
Qualified for BOD, (Glucose-Glutamic acid standard solution BOD5 =180-230mg/L)


Measurement
Measurement days 1-30 days


Number of sample measurements
6


Volume of container
580mI


Working Temperature
20 + 1 C


Data management Data Storage
10-year BOD 5 result value


Display Back light
Yes


Date and Time
Yes


General
Power AC Adapter, 100-240V AC input


Machine Dimension (LxWxH)
272 - 185 - 75 mm


Packing Dimension (LxWxH) mm
490 - 410 220 mm


Power Supply
Adaptor, Using AC 220V,50/60Hz


Net Weight
2.4kg


Gross Weight
8 kg

A Needle Burner cum Syringe Destroyer is a vital medical device used for the safe and efficient disposal of used needles and syringes. This device typically employs a heating element to melt and incinerate needles, rendering them non-reusable and eliminating the risk of accidental needlestick injuries. It provides a hygienic and environmentally friendly solution for healthcare facilities to manage sharp medical waste, ensuring the protection of both healthcare workers and the environment.
Key Features :

Housing Enclosure: Compact, Portable, Light Weight.


It is moulded type made of ABS Plastic and is Shock Proof.
Suitable sliding tray made of ABS lined with SS material of thickness 0.8mm (minimum) on the side walls as well as the bottom of the tray is provided for collection of residue and destroyed tips syringe.
Suitable provision to burn the needle and to cut the syringe tips are provided in the unit.
It complies in general to the requirements of IS:302 (Part-1) 1979 to ensure safe and reliable operation in normal use.

2. Manual Cutter: Fitted with High Carbon Cutter to cut Syringe Hub.
3. Capacity: The unit is having adequate capacity to destroy all kinds and following sizes of injection needles. Dia ranging from 24G upto 18G.
4. Power Switches: Power on/off switch is provided along with power on indicator. The unit is provided with fuse of adequate rating. The item quoted is also provided with power cord of 1.5 meter length and an earthing point.
5. Power Requirements: Power 230V+10% 50HZ AC supply requirements. The following are the power requirements.
1. In Stand-by mode maximum upto 3 watt.
2. During destruction of thickest needle of 18G maximum power requirement/power consumption is maximum 5 amp at 230VAC.
3. The 5 pieces of injection needle of 18G upto full length as available in market can be destroyed in continuous operation.

Securely seal blood bags with our reliable tube sealer.� Ensures airtight storage and prevents contamination.Perfect for hospitals, blood banks, and medical research facilities.

Lightweight, portable and heavy duty.
Di-Electric heating without damaging the blood cells.
Modern electronic system.
Wide seal of 4-6 mm diameter.
Easy to clean electrodes
Electrodes well protected by a cover
Able to seal all blood bag tubes.
Senses the blood bag tube for automatic sealing process
Power control unit monitored by microprocessor.
Continuous Battery backup 230V in� Online mode.
Battery Backup gives 500 sealing when fully charged on offline mode.
Visual indication for Mains, Ready & Seal

It is used to determine disintegration time of tablets and capsule. Our Tablet Disentegration Test apparatus is designed as per pharmacopeia specification. It is provided with six-digit digital timer to monitor disintegration time of sample.Temperature control (digital with readability of 0.1). Hold and resume facility for confirming disintegration, alarm at completion of test, time control digital (Programable from 000.1 min 999.9min), precise water bath for heating, up-down speed: 30±2 Strokes/min

Features:-

Programmable time with digital display
Auto stop after the set time with audio alarm for enteric coated tablets
Facility to hold and resume the time and motor movement for quickly disintegration tablets.
Manual mode of operation in case digital system fails
Special low RPM motor means less noise and constant speed even at very low/high voltage (160-260)
Heating control through digital temp. meter

Model
S- 940

Up-Down Speed
30 + 2 RPM


Up-Down Length
55 + 5 mm


Time Display
1 Digit for Hr and 2 for mint

Electric Motor
Low RPM A.C. Motor

No. of Basket
2

Temperature Control
Digital Display

Audio Alarm At Completion
Yes


Hold & Resume Facility
Yes

Type of Heating
Water Bath Type

Dimension
305X330X385  mm (LXBXH)

It is used to determine the disintegration time of tablets and capsule. Our Tablet Disentegration Test apparatus is designed as per pharmacopeia specification. It is provided with six-digit digital timer to monitor disintegration time of sample.

Features:-

IP/BP/USP Standard
Programmable Time with Digital Display
Auto Stop After Completion of Set Time with Alarm
Memory for Protection of Running Test in Case of Power Failure
Separate Regulator for Control of Heating
Facility for Hold and Resume the Running Test for Inspection of Sample

Type of Heating
Hot Plate


Up-Down Speed
30 + 5 Strokes/min


Up-Down Length
55 + 58 Min


Time Control
Digital (Programmable from 1 sec to 99 hr, 56 min, 59 sec)


Electric Motor
Low RPM A.C. Motor


No. of Basket
2


Temperature Control
Energy Regulator


Audio Alarm At Completion
Yes


Hold & Resume Facility
Yes


Dimension
305X330X385 mm (LXBXH)