Description :
3.7 Kw air-cooled recoiled Start petrol engine with 6:1 reduction gear. Output speed governed to approximately 500 r.p.m.
Filter :
Washable stainless steel mesh filter element
Pump :
Gear type pump, direct drive from output shaft of engine reduction gear through a flexible coupling. Output when spraying bitumen emulsion is approximately 18lt per minute.
Lance :
5m Oil Resistant delivery hose fitted to 2m lance including handle grip. Shut off Valve and 2 only 65 degree flat spray adjustable nozzles.
Chassis :
Of all steel robust design on four 350 mm x 100mm semisolid rubber tyred wheels and incorporating handle bar, splash guard, drum and lance carrying brackets.
PRODUCT DESCRIPTION:
(1) FOUR BIN FEEDER.60 TONS CAPACITY( EACH BIN HAVING 15. CAPACITY.
Bin Feeder Belt : - 2750 500 3 Ply = 4 Nos.
Bin Feeder Motor : - 2 HP. AC Motor = 4 Nos.
Drive Gear : - C: 20:1 = 4 Nos.
Gathering Gear : - D: 20:1 = 1 Nos.
Gathering Motor : - 5 HP. = 1 Nos.
Gathering Belt : - 600 24500*3 Ply = 1 Nos.
One Bin Vibrate Motor : - 1 HP. = 1 Nos.
Thickness Plate : - 4 mm Sheet.
(2) VIBRATING SCREEN.
Screening Area. : - 900mm 1200mm.
Screening Size. : - 45mm 45mm * 8mm.
Vibrator Motor. : - 1 HP Motor.
(3) SLINGER CONVEYER SET.
Conveyer Belt Size : - 15000 600 3 Ply.
Motor : - 5 HP AC / 1500 RPM.
Gear Box : - D: 5:1 Gear.
Length : - 26. Ft.
(4) DRYER UNIT.
Diameter : - 1540mm.
Length : - 6705mm
Plate Thickness : - 8mm
Chassis I â?? Beam : - 300mm
Reduction Gear : - 8 20 : 1
Drum Motor : - 25 HP / 1500 RPM
Exhaust Motor : - 25 HP / 1500 RPM
Exhaust Fan : - 900 CMF
Burner : - Cap hr 350 LPH
Burner Blower Motor : - 7.5 HP / 2800 RPM
Pumping Unit : - 3 HP Motor
Dust Collection Screw : - 2 HP Motor
Dust Collection Gear : - 3 40:1
(5) LOAD OUT CONVEYER SET.
Conveyer Belt : - 18000 600 3 Ply (HR)
Motor : - 5 HP Motor
Gear Box : - D: 20:1
Length : - 34 Ft
Gob Hopper Cap. : - 1 ton
Power Pack Set. : - 2 H.P
(6) BITUMEN TANK. (25 TON)
Storage Cap. : - 25 ton = 1 Nos.
Plate Thickness : - 4 mm Sheet.
Bitumen Pump : - jacketing Pump.
Bitumen Motor : - 5 HP AC Motor.
Gear Box : - 3 10:1
(7) LDO TANK
Storage Cap. : - 10 Ton.
Plate Thickness : - 3 mm Sheet.
(8) CONTROL CABIN WITH ELECTRIC CONTROL PANEL BOARD AC DRIVE.
(9) POLLUTION CONTROL UNIT
Item Specification
Paint Tank Stainless Steel Tanke with 100 Kgs. Capacity
Heating System Fire Nozzles, Gas Meter, LPG Supply, Valves, Stove, and Pipe.
Tank Temperature Temperature Gauge 30 C - 400 C to maintain the uniform temperature of the material.
Marking Manual Screeding
Pointer Guide Front Mounted Pointer Guide adjustable Accordingly
Standard Marking Shoe 100 mm and 150 mm marking shoe ( High Temperature, Oxidation and Deformation resistance )
Marking Thickness 1.5 - 3.0 mm (Adjustable to 3.5mm)
Marking Shoe Optional 50mm / 80mm / 100mm / 120mm /150mm / 200mm / 250mm / 300mm / 500mm (as per requirement)
Glass Beads Storage Box Capacity :- 15 Kgs.
Tool Box Tool Box Kit & Storage etc.
Net Weight 190 kgs (Approx)
Gross Weight 260 - 280 kgs (Approx.)
Wooden Box Dimensions (CMS) 140 X98 X 126 (LxWxH)
Packing Type Wooden Box (Standard)
Description
Mode of Operation : Tractor Mounted
Sweeping Widht : 2.0 Meter
Powered By : Hydraulic Motor
Sweeping Adjustment : Adjustable on both side as per slope of road
Brush Adjustment : Upto 100mm
Material of Brush MS Wire & Nylon Bristle
Bucket Storage Capacity : Upto - 200 Kg.
Open Closed by Hydraulic cylinder : Dust Collection Hopper.
Indoor / Outdoor both area clear sweep possible through machine.
It is very compact & light weighted machine.
Single person can operate like the trolley push.
Two Tyre based solid chasis designed for mount the big size air blower with Honda
Make Petrol Engine.
Honda Make Engine GK200 Model, 2.28 KW / 3600 rpm. Rope pull start engine.
Petrol & Kerosene both fuel possible to use.
Maximum Construction Company are use this machine to sweep wet mix road, concrete
road for cleaning before the asphalt laying / bitumen spraying.
Manaul Road Sweeping Machine
Hopper Capacity : 40 Ltr
Area Coverage : 3600 sq. mtr/ hrs
Sweeping Width With Main Brush - 700mm
Sweeping Width With Side Brush - 920mm
Weight : 24kg
Dimension : 30 x 29 x17 inch
Description
AC Power 220-V. Electric Fuel Transfer Pump 50L. Per Minute
Digital Fuel Meter
Trolley Wheel Plate & Tyres 6.00-16 Size = 2 Nos.
Suction Pipe House x 12 Ft. Anti Static House
Dispensing Nozzle Manual With Swivel
Tractor Toeing Bar
* It is constructed using the high graded stainless steel plates & square pipes with 12mm
and 8mm
* It is mounted on standard tipper
* Spreading width is of 2500mm
* The drive is transmitted from the tyre through dog clutch mounted on lay shaft
* Easy clutch & cut off system.
Description
AC Power 220-V. Electric Fuel Transfer Pump 50L. Per Minute
Digital Fuel Meter
Trolley Wheel Plate & Tyres 6.00-16 Size = 2 Nos.
Suction Pipe House x 12 Ft. Anti Static House
Dispensing Nozzle Manual With Swivel
Tractor Toeing Bar
In In-direct heating type tanks-cylindrical in shape& horizontal in position, the bitumen is heated by circulating hot thermic oil through its heating coil. A thermic oil heater with oil fired burner heats the thermic oil & this hot oil is circulated through the heating coil inside the bitumen tank by an oil pump on heater. A single heater can easily heat nos. of tanks as required in continuous process. The temperature of oil is very well controlled by an auto thermostat on heater and so, bitumen never gets over-heated. Thus, the quality of bitumen (viscosity) never gets deteriorated/spoiled in this kind of indirect heating system. Fuel consumed to heat every ton of bitumen is also less compared that for a direct heating system.
Manufacturing & supply of W â??Beam Metal Crash Barrier Single side Single Beam Guard rail comprising of 2.7 mm cold rolled section having minimum yield strength 2400 kg / sqcm having width of 312 mm and depth of corrugation as 83 mm with hot dip galvanized of zinc coating@ 550 g/sqm having total length 4.318 M (effective length 4M) generally as per MORTH specification. (THICKNESS 2.7 MM)
The Post channel made of Hot rolled section having minimum yield strength 2400 kg / sqcm. The post will be hot dip galvanized of zinc coating@ 550g/sqcm having size of 150mm x 75 mm x 4.7 mm thick x 1800 mm long.
The Spacer channel made of Hot rolled section having minimum yield strength 2400 kg /sqcm. The post will be hot dip galvanized of zinc coating@ 550g/sqcm having size of 150mm x 75mm x 4.7mm thick and 330mm long. Along With the required button Head Bolts & Hexagonal Bolts for fixing. (As Per IS 1367 & 1364)
