Drawworks Brake Band
Product Description
Drawworks Parts:
Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragm s, Drum Assembly.
NATIONALOILWELLCONTINENTAL
EMSCOIDECOGARDNER-DENVER
370/370-E500C-3-II900500/500-E
610/610-E660/660-EC-3-III1200700
80-B/80-UE700/700-EC-2-II1700800
110-M/110-UDBM760/760-EC-2-III21001100
110-UE/110-UDBE840-EC-1-II30001500
1320-M/1320-UDBM860/860-EC-1-III 2100
1320-UE/1320-UDBEM-2000D-3-II 3000-E
1625-M/1625-UDBME-2000D-3-III
1625-DE/1625-UDBEM-3000/M-3000-UDBD-2
2040-UDBEE-3000/E-3000-UDBD-1
Sl-swivel with spinner
Xsl-swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel.It is designed and manufactured according to api spec 8c "specification for drilling and production hoisting equipment"
Skype: julia0402zcy
Water swivel for drilling
1.Ma.Static load:4500kn
2.Max.Rotary speed:500r/min
3.Max.Wp:35mpa
4.Id of center pipe:75mm
Water swivel for drilling
The swivel includes two main categories, which are common swivel and double duty swivel. Double duty swivel is a common swivel combined with a spinner. Common swivel consists of swivel bail, shell, support, gooseneck, central pipe, master bearing, joint and other parts. The lower end is connected with kelly stem by reg thread. The swivel bail is hung on the hook. Gooseneck and rotary hose can be connected by reg thread connection or union connection.
Washpipe packing set assembly adopts cassette structure, so it can be quickly replaced without disassembling rotary hose and gooseneck. 3lp and 4lp internal or external thread hose connection thread are available for you. We can also manufacture low temperature resistant swivel according to customer's requirements.
Our swivel meets api spec 8cpsl1 standards. It has been awarded the api certification issued by the american petroleum institute and is allowed to use api monogram.
Cheaper crosshead for mud pump
Product description
The crosshead supplied by lake petro is manufactured from high quality, cast steel and the guides are from a quality manganese bronze normally used in bearings. This combination of materials provides a low friction interface and generates very little heat, which indications no friction, which equates to no wear.
Lake petro has very rich experience in supplying spare parts of mud pump to the worldwide oil drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for f series mud pump, for p series mud pump, for pz series mud pump, for 3nb series mud pump.
These parts include liners, pistons, valves & seats, piston rods, rod clamps, extension rods, all
Fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
Components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Our company can supply you the mud pump spare parts for you. All our spare parts are manufactured according API specification.and it is made for F series and 3NB series mud pump.
Up to the parts you want.
F series mud pump is applicable to the requirement of high pump pressure in the oilfield and large flow technology of well drilling with its solid and compact structure, small volume and outstanding operation performance. It is widely used in the oilfield, industrial and mining enterprises for well drilling, well repairing etc. It mainly suits to rig 20-32 with drilling depth 2000m to 3200m. Strictly manufactured according to api spec 7k and tested accordingly when leave factory.
3nb drilling mud pump is designed according to api 7k design characteristics is an optimization parameter, increased the stroke properly, lowered the speed reasonably, improved the suction capability of the pump, prolonged the service life of wearing parts the pump used for oil-field and other industrial and mining establishments; used for the drill, well work over and transport the liquid media mainly installed on 20~25 rig.The series pump produces according to sy5138 of the petroleum industry standard strictly, and carry through factory's experiment according to the standard.
Slx elevator
Model slx side door elevator with square shoulder are suitable for handling tubing, casing , drill pipe and drill collar in oil and natural gas drilling,
Well construction. The products shall be designed and manufactured according to the requirements in api spec 8a/8c specification for drilling and production hoisting equipment.
Mud pump liner / drilling pump liner
Product description
Lake petroâ??s liners offer extended run times with excellent resistance to abrasion, erosion and corrosion. Lake can provide you ceramic, chrome iron sleeved and hardened steel liners for all mud pump manufactures.
Lakeâ??s mud pump liners are designed and manufactured to meet or exceed original equipment specifications and api standards for almost all types of mud pumps.
Lake petro has very rich experience in supplying spare parts of mud pump to the worldwide oil drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for f series mud pump, for p series mud pump, for pz series mud pump, for 3nb series mud pump.
These parts include liners, pistons, valves & seats, piston rods, rod clamps, extension rods, all
Fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
Components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Any demands or questions about such parts, just feel free to contact me:
Skype: julia0402zcy mob/whatsapp: +86 18661596896 email: julia@lakepetro. Com
Mud pump liner / drilling pump linermud pump liner / drilling pump linermud pump liner / drilling pump linermud pump liner / drilling pump linermud pump liner / drilling pump liner
Mud pump liner / drilling pump liner
Mud pump liner / drilling pump linermud pump liner / drilling pump liner
Api 5dp drill pipe for well drilling / mining
Specification
1) od: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2"
2) steel grade: e75, x95, g105, s135
3) type of end finish: eu-external upset, ieu-internal & external upset
4) all drill pipe are made according to api 5d
5) we can provide in many conditions, with or without hard banding (arnco100, arnco300, tungsten carbide etc).
Dth drill pipe
Specification
1) od: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2"
2) steel grade: e75, x95, g105, s135
3) type of end finish: eu-external upset, ieu-internal & external upset
4) all drill pipe are made according to api 5d
5) we can provide in many conditions, with or without hard banding (arnco100, arnco300, tungsten carbide etc).
9-5/8" Air-Operated Thread Protector
Product Description
Air-operated thread protectors offer safe, reliable casing and tubing pin-end protection. The working principle of air-operated protectors is based on pressurization by rig air (116 to 130 psi, or 800 to 896 kPa), which ensures easy installation and reliable protection for all API standard and premium threads.
Three types of air-operated thread protectors are available:
â?¢ The HD protector is designed for mild and cold climates.
â?¢ The HDH protector is designed for use in tropical areas such as the Middle and Far East, Africa, South America, and parts of Australia.
â?¢ The HD-T/HDH-T protector is designed for tender-assisted rigs and pickup/laydown machines. The T-type protector has an aluminum reinforcement embedded in the buffer.
Features, Advantages, and Benefits:
These durable protectors provide a 360° grip with greater, evenly divided holding power. Durability is enhanced because the outside of the protectors does not change; only the inside inflates to provide a better grip on the pin.
Absence of moving parts, metal clamping bars, or other mechanisms provides a long and virtually maintenance-free life cycle.
The bottom of each protector contains a rugged buffer.
Air operated thread protectors provide firm attachment to all thread types for greater operational flexibility.
Rugged construction makes this protectors resistant to high temperatures and rough handling for a long life cycle.
Pressurization by air facilitates installation and release for operational efficiency.
Technical Parameters
Model HD Protector HDH Protector HD-T/HDH-T Protector
Yellow top,
black bottom
Orange top,
black bottom
Orange top,
green bottom
Applications Mild and cold climates Tropical climates
Tender-assisted rigs and pickup
/laydown machines
Hardness
body/buffer (Shore A) 78/95 88/95
Tensile strength 33/26 N/mm2
Abrasion 40/100 mm3
Temperature range
(°F, °C) -31 to +100
-35 to +38 +55 to +1
49
+13 to +65
API 7K QW175 QW 205 QW 275 QW 375 Air Pneumatic Slip for rotary table
Product Description
High Quality Drill Pipe Air Slips, QW 275 Type Pneumatic Slips
QW Type Pneumatic Slip is an ideal well-head mechanized tool with double functions, it can automatically handle the drill pipe when the drilling rig is running in hole or does pipe wiping when the drilling rig is pulling out of hole. It can accommodate different kinds of drilling rig rotary table. And it features convenient installation, easy operation, complete functions, high automation, low labor intensity, and can improve the drilling speed.
Technical Specifications:
Model
QW-175
QW-205(520)
QW-275
QW-375
Suited for which rotary tables
ZP175
ZP205(ZP520)
ZP275
ZP375
Working pressure
MPa
0.60.9
psi
87 -130
Effective clamping length
mm
350
420
420
420
in
133/4
161/2
161/2
161/2
Rated load
kN
2250
2500
2500
2500
Slip extenstion height
mm
< 300
in
API 7K Mud Pump Parts Gasket O-Ring Packing
Product Description
Lake Petro offers a wide range of gaskets and packing materials for usage in drilling pumps.
Gaskets and packings made of polyurethane, rubber and combination of fabric and rubber.
Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all
fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Rongsheng F1600 Mud Pump Crosshead
Product Description
The crosshead supplied by Lake Petro is manufactured from high quality, cast steel and the guides are from a quality manganese bronze normally used in bearings. This combination of materials provides a low friction interface and generates very little heat, which indications no friction, which equates to no wear.
Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all
fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
TQ Series Hydraulic Casing Tong
Product Description
TQ series of casing power tongs are widely used for making up and breaking out pipes or casinga in diameters of 4~13 3/8 inch. the tong heads are designed "open"type and can freely clamp and escape from the casing.TQ casing power tongs are safe, raliable and easy to handle with mobility.this series of tongs can be connected to computer controlling units and can serve as ideal well mechnical tool for surface operations in oil fields. national invention patent of the tongs has been got. the tongs are designed and manufactured according to API 7K specification for drilling equipment.
TQ series of hydraulic casing tongs are widely used for making-up and breaking-out of casings or pipes. The series of casing tongs are wholly hydraulic driven. The tongs are configured with a large-torque motor. And per form mechanical gearchange. Structure is simple and operation is safe. The casing tongs can be supplied with torque device to perform computer monitoring and managing on pressure, torque and rounds. The casing tong are designed and manufactured according to SY/T5074 standard and API spec 7Kspecification for drilling and well servicing equipment.
Products Drawing
TQ Series Hydraulic Casing Tong
Main Parameters
Casing Power tongs Technical specification:
Model TQ178/16 TQ340/35 TQ356/55
Size Range mm 101.6-178 114.3-340 114.3-356
inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14
Max Pressure Mpa 18 16.6
psi 2610 2400
Working flow L/min 110-160 110-140
gpm 29.3-42.7 29.3-37.3
Air Pressure Mpa 0.5-0.9
psi 72-130
Max. Torque kN.m 16 35 55
ft.lbf 11800 25800 40560
Speed rpm 9-79 3.5-86 4-70
Size mm 1450*760*740 1580*900*880 1770*960*850
in 57*30*29.1 62.2*35.4*34.6 69.7*37.8*33.5
Weight Kg 580 780 1150
lb 1280 1720 2530
TQ series hydraulic casing power tongs technical specification:
Model TQ178/16Y
TQ340/35Y
TQ356/55Y TQ508/70Y TQ610/60Y TQ340/85Y
Size rang mm 101.6-178 114.3-340 114.3-365 244.5*508 244.5-610 114.3*340
inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14 9 5/8 -20 9 5/8-24 4 1/2-13 5/8
Max. Pressure Mpa 18 20 18
psi 2610 2900 2610
Working Flow L/min 110-160 110-170 120-180 110-170
gpm 29.3-42.7 29.3-45.4 32-48 29.3-45.4
Max.Torque kN.m 16 35 55 70 60 85
ft.lbf 11820 25800 40560 51600 44250 62680
Speed rpm 9-79 8-90 4.8-61 4-43.6 5-45 3.2-45
Size mm 1500*760*800 15800*900*860 1770*960*780 2080*1280*760 2330*1310*840 1995*1150*680
inch 59*30*31.4 62.2*35.4*33.8 69.7*37.8*30.7 82*50.4*30 91.7*51.6*33 78.5*45.3*26.8
Weight Kg 560 760 1100 1550 2100 1700
lb 1230 1670 2420 3410 4620 3740
Rubber Drill Pipe Wiper
Product Description
Detailed introduction:
1. Drill Pipe Wiper
2. Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance
to cutting, tearing and abrasion. They are available for water based and oil based drilling mud.
Designed for application.They are available for 5", 3.1/2", 2.3/8" and 2.5/8" drill pipes / tubings.
3.Size for 27/8",31/2" 5" 51/2"drill pipe
4.wiper is designed to clean casing,tubing in oilwell .
Advantages:
1. high strength- Resistance, wear- Resistance
2. Resistance to high temperature
3. Absorption oscillation resistance to high speed
4. Resistance to heavy load
5. Internationally advanced quality level, can be designed to meet the specific needs
Description:
Material: Butyronitrile rubber is the basic material. The inner steel skeleton is to prevent deformation.
Main application: prevent drilling fluid returning from the drilling. Clear drilling fluid on the drill pipe wall
to prevent the corrosion of metal.
Hardness: 8 to 95 ±5 shore A ,±3 shore A tolerance specially
Color: for rubber, usually black, for silicone, can be in any color as you want Machine type:
50 to 400 tons Mold/samples lead-time: For prototype mold, usually in 7days For mass production mold, usually in 2 weeks
For some special molds, can be in 30 days, especially for some automotive rubber molds
Oilfield drill pipe clean wiper
Product Description
Oilfield drill pipe clean wiper are designed to place around the pipe to remove mud and debris from the pipe to provide safer handling of the pipe and a cleaner and a safe rig floor. The drill pipe wipers manufactured by us are made of a long lasting, durable rubber compound that is resistant to mud, water and oil based drilling mud.
Application:
1. Drilling rig
2. Work over rig
3. Swabbing unit
Item
Parameters
Material of pipe wiper
Natural rubber, nitrile rubber
Usage
Oilfield drilling pipe
Hardness. Shore A
60 +/- 5
Tensile strength. MPA
16
Elongation at break. %
460
Inner diameter.
2 3/8" to 7"
Outer diameter.
9" to 26"
Types of pipe wiper
Flat type, dual type and dual split type
Lower Valve Rod Guide for Mud Pump
Product Description
Valve rod guide consists of upper parts and lower parts.
Guider (lower) is installed in the inner chamber of the hydraulic cylinder ,for centering and positioning the suction valve body assembly.
The guider consists of the guide way and the inner sleeve embedded in the guide way.The material of the guide way is ZG35CrMo, and the inner sleeve is treated by 20CrMnTi carburization and quenching.
Brand
Model
Emsco
F-350
F-500
F-650
F-800
F-1000
FA-1300
FB-1300
FA-1600
FB-1600
Gardener Denver
PZ-7
PZ-8
PZ-9
PZ-10
PZ-11
National
7-P-50
8-P-80
9-P-100
10-P-130
12-P-160
IDECO
T-800
T-1000
T-1300
T-1600
Oil Well
A-350
A-560
A-650
A-850
A-1100
A-1400
A-1700
China
3NB-350
3NB-500
3NB-800
3NB-1000
3NB-1300
3NB-1600
3NB-2200
P/N 2FZ2835ALWS.02B.04-00 3-1/2" Rubber Pipe Ram for 2FZ28-35 LWS BOP
Product Description
Ram BOP Rubber Seal Ram Top Seal Front Seal Packing Element
API 16A BOP spare parts and BOP variable ram. We can supply all series BOP ram including pipe ram (2 3/8â?³,2 7/8â?³,3 1/2â?³,4â?³,4 1/2â?³,5â?³,5 1/2â?³,5 3/4â?³,6 5/8â?³,7â?³,7 5/8â?³,9 5/8â?³,9 7/8â?³,10 3/4â?³), blind ram, shear ram and variable ram (2 7/8~5, 4 1/2-7), and double hole ram.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Main Parameters
1)Standard: API
2)Pressure: 2000~15000psi(14-105Mpa)
3)Size:Nominal bore7 1/16~21 1/4" (179.4~539.75mm)
4) U type, S type Available
5) Shear/ Pipe/Blind Ram
6) According to the latest API Spec 16A standard,and quality standard of ISO9001.
API 16A LWS BOP 2FZ28-35 Pipe Ram Rubber
Product Description
Blowout preventer (BOP)
BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead.
Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud.
Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells.
Parts Lake Petro supplies apply to below BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type:Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & bottom connection:Flanged,studded
Tricone Bit Breaker
Product Description
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2>It can also prevent the rock bit from dropping into well hole.
3>The price of it is cheap and the use of it is safety and reliable.
4>It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
Oilfield drill pipe clean wiper are designed to place around the pipe to remove mud and debris from the pipe to provide safer handling of the pipe and a cleaner and a safe rig floor. The drill pipe wipers manufactured by us are made of a long lasting, durable rubber compound that is resistant to mud, water and oil based drilling mud.
Application:
1. Drilling rig
2. Work over rig
3. Swabbing unit
Item
Parameters
Material of pipe wiper
Natural rubber, nitrile rubber
Usage
Oilfield drilling pipe
Hardness. Shore A
60 +/- 5
Tensile strength. MPA
16
Elongation at break. %
460
Inner diameter.
2 3/8" to 7"
Outer diameter.
9" to 26"
Types of pipe wiper
Flat type, dual type and dual split type
No.
Product Description
Bore Size
Material
1
Low profile pipe wiper 9"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
2
Flat solid pipe wiper 9"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
3
Flat solid pipe wiper 12"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
4
Low profile pipe wiper 14"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
5
Flat solid pipe wiper 14"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
6
Split dual pipe wiper 14"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
7
Flat solid pipe wiper 17"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
8
Split dual pipe wiper 17"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
9
Flat solid pipe wiper 19"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
10
Split dual pipe wiper 19"
2 3/8, 2 7/8, 3 1/2 and 5
Natural, Nitrile Rubber
Main Features
1) Remove fluids and debris from pipe.
2) Reduce fluid spillage on rig floor.
3) Steel ring molded in place for added support.
4) Oil resistant, temperature resistant, wear resistant.
5) tear resistant, acid & alkali resistant, anti-corrosion, etc .
Manual Break Out Tong for 60mm Drill Pipe
Product Description
Lake Petro can supply all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer, Hydraulic & Manual power break out tong for drill pipe.
5 1/2" Nitrile Rubber Solid Dual Split Drill Pipe Wiper
Product Description
Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil based drilling mud. Designed for application to Drill Pipe where a solid master bushing is used.
We manufacture both Dual Split and Single Solid Type of Drill Pipe Wipers. Dual wipers are made with a spring steel reinforced ring. The split in the dual wipers allows are wiper to be threaded easily onto the pipe. Our split type wipers offer the advantage of a symmetrical, one piece design with multiple wiping action. it provides more than two full turns of continuous wiping surface around the full circumference of the pipe. Unlike split tyep wipers, there are no gaps, in the inner wiping edge to leave unwiped streaks on the pipe. Single Solid Wipers have a series of concentric rings moulded around the inner wiping surface. Each ring carries a specific size, identifying the area of the center hold to be cut out for a specific drill pipe size.
Description
Box Pack
Bulk Pack
Product Weight
9 x 2-3/8 Pipe Wiper Low Profile
10
450
2.2 lbs
9 x 2-7/8 Pipe Wiper Low Profile
10
450
2.2 lbs
9 x 3-1/2 Pipe Wiper Low Profile
10
450
2.2 lbs
9 x 2-3/8" Square Edge Pipe Wiper Std (60 Duro)
10
450
2.2 lbs
9 x 2-3/8 Square Edge Pipe Wiper Soft (50 Duro)
10
500
2.2 lbs
Mud Pump Cylinder Head Valve Cover
Product Description
Our company is specialized in interchangeable parts for brand name mud pump, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.All items,oilfield API mud pump parts cylinder head/valve cover are manufactured to API 7K quality standards. Parts are available for these popular pump models:
EMSCO:F-1300,F-1600,FB1300,FB1600,F-800,F-1000,F-500,F-350,DB-550,DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700
IDECO: T-500, T-800, T-1000, T-1300, T-1600
NATIONAL: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400
GARDNER DENVER:PZ7,PZ8/9,PZ10/11,FK-FXK,FY-FXD,FD-FXX,FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF,FF-FXP
OILWELL: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
And other brand spare parts for Wirth,Opi,Ellis Williams,Wilson,Gaso,Skytop/Brewster.
Mud Pump Spare Parts Details,oilfield API mud pump parts cylinder head/valve cover
Fluid End: liner, , piston rubber, valve body, valve seats, valve rubber, liner seals, cylinder head gasket, valve cover seals, piston rod, clamp assembly, valve cover, cylinder head, flange head, cylinder flange, cylinder cover, inhalationcapsules, etc.
Power End: extension rod, crosshead, crosshead pin, cross pin baffle, upper and lower guide plate, packing boxes, seal ring, oil seal lips
Dampener: Dampener diaphragm, pressure gauges, fittings, tees, angle type valve, relief valve, exhaust valve
Other Accessories: JA-3 valve assembly, the small piston, small rod, cushion, 2S gear pumps, 32PL spray pump. Drilling Mud Pump Parts
Mud Pump Cylinder Cover
Product Description
Introduction:
Our company is specialized in interchangeable parts and liners for brand name mudpump, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.All items are manufactured to API 7K quality standards. Parts are available for these popular pump models:
EMSCO:F-1300,F-1600,FB1300,FB1600,F-800,F-1000,F-500,F-350,DB-550,DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700
IDECO: T-500, T-800, T-1000, T-1300, T-1600
NATIONAL: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400
GARDNER DENVER:PZ7,PZ8/9,PZ10/11,FK-FXK,FY-FXD,FD-FXX,FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF,FF-FXP
OILWELL: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
And other brand spare parts for Wirth,Opi,Ellis Williams,Wilson,Gaso,Skytop/Brewster.
Oilfiled PZ Series Mud Pump Crosshead
Product Description
Crosshead Pin
The crosshead pin is made from 45# steel. It is the component between connecting rod and crosshead. Our company strictly follows the taper requirements of the encircle according to the precision machining.
Crosshead
Materials: ductile iron
Production Process: It casts by ductile cast iron, which can reach more than 600Mpa tensile strength with good abrasion resistance and long service life.
Application: When the pump is in working process, the excircle of the crosshead will move up and down in the slide. In order to ensure good working condition of the pump, our company strictly follows the shape and position tolerances requirements of the excircle and tapered bore. And the crosshead and extension rod is connected with flange bolting.
Brand
Model
Emsco
F-350
F-500
F-650
F-800
F-1000
FA-1300
FB-1300
FA-1600
FB-1600
Gardener Denver
PZ-7
PZ-8
PZ-9
PZ-10
PZ-11
National
7-P-50
8-P-80
9-P-100
10-P-130
12-P-160
IDECO
T-800
T-1000
T-1300
T-1600
Oil Well
A-350
A-560
A-650
A-850
A-1100
A-1400
A-1700
China
3NB-350
3NB-500
3NB-800
3NB-1000
3NB-1300
3NB-1600
3NB-2200
NEMA D Electric Motor
Product Description
NEMA standard high starting torque, high slip ratio three-phase asynchronous motors (D design) have insulation class F, protection class IP54 (IP55), 1.15 of service factor, 230/460V of the voltage rating, frequency 60Hz, -15 ~ 40 ° C of ambient temperature, altitude does not exceed 3300 feet.
The motors are specially suitable for the machines like injection pump that require high starting torque, soft starting features as motive power.
This series motors can be made as per customers special requirements.
NEMA D Series
Center Height of Frame 231T-449T
Rated Power 3-150HP
Service Factor 1.15
Supply Voltage 230/460V
Rate Frequency 60Hz
Structure IP54, IP55
Insulation Grade F
ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
10 HP-60 HZ 900 RPM NEMA D Electric Motor
Product Description
ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D,
SERVICE FACTOR 1.15,
460V, PHASE 3,
INSULATION CLASS F,
BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED,
BEARING BRAND NSK,
SHAFT MATERIAL 1045 CARBON STEEL,
COLOUR WHITE.
API Center Latch Tubing TA Elevator TA100
Product Description
The TA Style Elevators are for use on tubing, casing and drill collars. The elevators are balanced for easy handling with safety lock and latch and guarded operating handles. Sizes range from 35 tons to 150 tons and cover all size tubular up to 111/4".
Model
Size(in)
Rated Cap.
(short tons)
DC
Tubing
Casing
NU
EU
TA-35
27/8-31/8
1.05-27/8
1.05-27/8
/
35
TA-65
27/8-31/8
1.66-27/8
1.66-27/8
/
65
TA-100
31/8-51/4
23/8-5
23/8-41/2
/
100
TA-150
41/8-111/4
/
/
41/2-103/4
150
API Spec 6A Christmas Tree for Oil Exploration
Product Description
API 6A Christmas Tree And Wellheads
The Christmas tree is the assembly of the valve and the accessories, which is used for the fluid control of the oil/gas well, and supplying the inlet for the tubing string. The Christmas tree refers to all the devices on the tubing head and the flange. The Christmas tree could be assembled differently so as to meet the different requirements. The Christmas tree could be used for oil exploration, gas exploration, water adding, compression fracture, acidification, etc. The different Christmas trees are with the different pressure grades.oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree.
The Christmas tree and the tubing heads are mainly used for gas exploration and adding. Because the natural gas is with the low relative density and adding pressure, while the wellhead is with the high pressure and flow rate, it would be easy to leak. Sometimes, theres H2S, CO2 and other corrosive medium in the natural gas. It would have the more strict requirements on the sealing capacity and the sealing materials of the Christmas tree. Thus, the tube and the sleeve should be with double valves. The valves should be forged by the best-quality steel for the high-pressure or extra-high-pressure gas well. oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree, oil and gas christmas tree.
Carbon Steel Tricone Bit Breaker
Product Description
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2>It can also prevent the rock bit from dropping into well hole.
3>The price of it is cheap and the use of it is safety and reliable.
4>It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
Carbon Steel Bit Breaker for 8-1/2" Tricone Bit
Product Description
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1>Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2>It can also prevent the rock bit from dropping into well hole.
3>The price of it is cheap and the use of it is safety and reliable.
4>It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
HDD Hydraulic Break Out Tong
Product Description
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer,hydraulic power break out tong for drill pipe.
Hydraulic IBOP for Varco Top Drive
Product Description
IBOP for top drive can be divided into Upper IBOP and Lower BOP; They are control valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi.
We produce H2S resistance IBOP for Top Drive, which adopt high quality import sulfur-resisitance material.
60-120mm Hydraulic HDD Breakout Tong
Product Description
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer,hydraulic power break out tong for drill pipe.
Hydraulic IBOP for Varco Top Drive
Product Description
IBOP for top drive can be divided into Upper IBOP and Lower BOP; They are control valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi.
We produce H2S resistance IBOP for Top Drive, which adopt high quality import sulfur-resisitance material.
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
Below are pictures of Gooseneck and Flange end for JH Top Drive DQ70, for Russia clients.
If you need any related parts or tools, freely ask me.
Hydraulic Inside BOP IBOP
Product Description
IBOP for top drive can be divided into Upper IBOP and Lower BOP; They are control valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi.
We produce H2S resistance IBOP for Top Drive, which adopt high quality import sulfur-resisitance material.
Technical parameters:
Type
O.D(mm)
I.D.(mm)
Length (mm)
Connection API
187-3
187
76.2
523
6 5/8REG
196-3
195.8
76.2
523
6 5/8REG
197-3
197
76.2
512
6 5/8REG
216-3
216
3
600
6 5/8REG
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
Below are pictures of Gooseneck and Flange end for JH Top Drive DQ70, for Russia clients.
If you need any related parts or tools, freely ask me.
API RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting
Product Description
Sucker Rod Hook is one of the hoisting equipment for sucker rods. It is suitable for all depths and operating conditions complete with single-hand latch construction and safety ring. It is safe and dependable enough. The sucker rod hook is designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Features:
(1) . API certified handling tools for well drilling.
(2) . Load capacity from 20 tons to 35 tons.
(3) . Easy for operation for safety use.
(4) . Short on delivery.
(5). Quality assured with national best standard.
Technical Parameters
Model
Rated Capacity
(short tons)
Length
(mm)
Hook Open Dimension
RH 20
20 (180KN)
488
1 7/8 in
(47.6mm)
RH 25
25 (225KN)
494
RH 25L
25 (225KN)
798
RH 35
35 (315KN)
960
API RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting
Photo View
API RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting
Packaging & Shipping
Standard export packing or according to client's requirements.
Shipping according to client's requirements.
API RH20 Sucker Rod Hooks for Oilfield Sucker Rod HoistingAPI RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting
Our Services
With years experience serving clients from more than twenty countries, to provide you best service and competitive price.
Quality Control
API RH20 Sucker Rod Hooks for Oilfield Sucker Rod Hoisting
Polyurethane Hydrocyclone Desander Cone
Product Description
Polyurethane, rubber, ceramic cyclone is widely used in oil drilling, nonferrous, ferrous and nonmetallic concentrator hierarchical classIfication work in process and many other links, used for desliming, dehydration of slurry materials, oil desanding and desilting device; Mining classification, tailings DAMS; The coal slime water processing and one of the important equipment such as recycling of slime. Hydro cyclones are used in variety of industrial and environmental applications to successfully separate solids from liquids. It is a common fractionation equipment. Its main role is to grade and concentration. Achieve grade and mud off a variety of materials.
Features of desander cone:
1. Hydro Cyclone filter is a kind of equipment for classifying the ore pulp by using centrifugal force.
2. Hydro Cyclone filter has no motion and dynamic parts, but requires matching with corresponding slurry pump.
3. Hydro Cyclone filter is based on fluid solid particles in the desander in screening principle when rotating in cycloneand filter made, as a whole, in the field of water treatment to achieve sand removal, and descending the turbid,solid-liquid separation effect is remarkable.
4.Suitable for dry fine powder classifying,powders of ball shape ,flake shape and needle shape,also powders with different densities.
5.Product size from classifier can vary from D97:2 micron to 150 micron.The product size is adjustable,which makes the change of product size easy and simple.
6.Classifying efficiency(extraction rate) can be between 60% and 90%.Material with good flow-ability would have high classifying efficiency,otherwise,the classifying efficiency would be low.
7.Vertical classifier wheel would have low ratation speed,low wear and low motor power.
Advantage of desander cone:
1.save floor space;
2.low construction expense;
3.Large processing capacity;
4.Stable Performance;
5.Low maintenance charge;
6.easy to attach and detach;
7.The classification particle size can reach 10μm.
Structure of desander cone:
Hydro cyclone filter consists of feed, outlet and inlet. hydro cyclone filter has one inlet that makes sure mud enters the cone along tangent direction. hydro cyclone filter has two outlets: the smaller at the bottom called underflow outlet or discharge outlet which denser or larger particles pass by, and the larger on the top called overflow outlet which lighter or finer mud pass by. The small inlet, outlet and small diameter needs high pressure while processing little capacity. On the contrary, the big inlet, outlet and big diameter needs low pressure while processing large capacity.
API 5CT BTC STC LTC Casing Coupling
Product Description
Tubing & Casing Coupling
Coupling is the joining of two short length pipes by the means of male and female threads.
All types of couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread forms. Couplings are strictly designed as per API specifications.
There are two types of tubing couplings widely used in the pipeline coupling manufacturing industries namely:
Non-upset Thread Tubing Coupling
External-upset Thread Tubing Coupling
There are three types of casing couplings widely used in the pipeline coupling manufacturing industries namely:
Short Thread Casing Coupling
Long Thread Casing Coupling
Buttress Thread Casing Coupling
Process: ERW and Seamless
Standard: API 5CT
Certificate: Casing: LTC, STC, BTC, VAM.
Tubing: NUE, EUE.
OD: Casing: 4 1/2 20 (114.3mm-508mm)
Tubing 2 3/8 4 1/2 (60.3mm-114.3mm)
Wall thickness: 0.205- 0.635
Length: R1, R2, R3
Grade: H-40, J55, K-55, N-80, C-75, L-80, C-90, T-95, Q-125
End: Beveled, Square cut. And pipe protection cap especially for casing and tubing.
Varco JH Top Drive Upper IBOP
Product Description
IBOP for top drive can be divided into Upper IBOP and Lower BOP; They are control valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi.
We produce H2S resistance IBOP for Top Drive, which adopt high quality import sulfur-resisitance material.
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
Below are pictures of Gooseneck and Flange end for JH Top Drive DQ70, for Russia clients.
If you need any related parts or tools, freely ask me.
5-1/2in L80 LTC Casing Couplings
Product Description
Tubing & Casing Coupling
Coupling is the joining of two short length pipes by the means of male and female threads.
All types of couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread forms. Couplings are strictly designed as per API specifications.
There are two types of tubing couplings widely used in the pipeline coupling manufacturing industries namely:
Non-upset Thread Tubing Coupling
External-upset Thread Tubing Coupling
There are three types of casing couplings widely used in the pipeline coupling manufacturing industries namely:
Short Thread Casing Coupling
Long Thread Casing Coupling
Buttress Thread Casing Coupling
API CASING COUPLINGS - LONG THREAD (LTC)
API Casing Couplings Long Thread
Casing Size OD (inches)
Coupling Size OD (inches)
Length (inches)
Weight per Coupling (lbs)
Palletized Carton Quantity
Palletized Carton Weight
4-1/2
5
7
9.07
294
2697
5
5.563
7.75
12.56
210
2573
5-1/2
6.05
8
14.03
180
2555
6-5/8
7.39
8.75
24.82
100
2315
7
7.656
9
23.67
100
2351
7-5/8
8.5
9.25
34.23
80
2807
8-5/8
9.625
10
47.48
48
2337
9-5/8
10.625
10.5
55.77
40
2302
10-3/4
11.75
* 10.500
* 62.38
45
* 36
11-3/4
12.75
* 10.500
* 67.59
30
* 24
13-3/8
14.375
* 10.500
* 76.63
25
* 20
16
17
* 11.000
* 96.55
20
* 16
18-5/8
20
-
-
10
8
20
21
* 11.500
* 126.74
10
8
* NOT API SPECIFICATIONS.
Process: ERW and Seamless
Standard: API 5CT
Certificate: Casing: LTC, STC, BTC, VAM.
Tubing: NUE, EUE.
OD: Casing: 4 1/2 20 (114.3mm-508mm)
Tubing 2 3/8 4 1/2 (60.3mm-114.3mm)
Wall thickness: 0.205- 0.635
Length: R1, R2, R3
Grade: H-40, J55, K-55, N-80, C-75, L-80, C-90, T-95, Q-125
End: Beveled, Square cut. And pipe protection cap especially for casing and tubing.
9 5/8in N80 API 8RD LTC Thread Casing Coupling
Product Description
Process: ERW and Seamless
Standard: API 5CT
Certificate: Casing: LTC, STC, BTC, VAM.
Tubing: NUE, EUE.
OD: Casing: 4 1/2 20 (114.3mm-508mm)
Tubing 2 3/8 4 1/2 (60.3mm-114.3mm)
Wall thickness: 0.205- 0.635
Length: R1, R2, R3
Grade: H-40, J55, K-55, N-80, C-75, L-80, C-90, T-95, Q-125
End: Beveled, Square cut. And pipe protection cap especially for casing and tubing.
3-1/2" EUE P110 Tubing Coupling
Product Description
Tubing & Casing Coupling
Coupling is the joining of two short length pipes by the means of male and female threads.
All types of couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread forms. Couplings are strictly designed as per API specifications.
There are two types of tubing couplings widely used in the pipeline coupling manufacturing industries namely:
Model 32PL spray pump is a horizontal centrifugal pump of single stage, and single suction overhang type. It is used mainly for showering, cooling and lubricating the cylinder and piston in drilling pump. It may be used also for transporting cleanwater under 80 or sewage water containing little mud and sand.When used together with drilling pump, it is driver through belt. As for operation on other cases, it can be connected directly with 4 pole motor.
Function
Impeller rotates generating centrifugal force, and the spray pipe assembly takes the water in the water tank to the cylinder liner, cooling and lubrication to the cylinder liner and piston.
Feature
1. It has reached the world standard of the same type of products, and is very much welcomed on domestic and foreign markets.
2. It can operate normally both in positive direction and negative direction on change .
3. It is smooth in operation, convenient in installation, adjustment and maintenance.
4.This pump is a patented product.
Technical Specifications
Type: ordinary spray pump and electric spray pump
Model Flow, Rotatespeed,
m3/h rpm
Kg Power,
Kw Deliveryhead,
m
ordinaryspraypump 32PL 6.5-, 335 ¦260 28 -- 7
Electricspraypump 32PL(D) 7.5m3/h - ¦294 ¦400 -- 2.2 10
The parameters
Model Flow,m3/h Lift,m Rotationspeed,rpm Efficiency,% Power,kw
ShaftPower MotorPower
32SB180J-2.2 7.5 10 1420/1750 48 0.55 2.2
32SB180J-4 9 14 1750 48 0.93 4
40SB180J-3 15 10 1420/1750 53 0.78 3
32PL 7.5 10 1420 48 0.55 -
32PL(B) 7.5 10 1420 48 0.55 -
We will send you a precise packing information after what kind pump you want, with the motor or not.
Mud Pump Valve Guide
Product Description
Valve rod guide consists of upper parts and lower parts.
Guider (lower) is installed in the inner chamber of the hydraulic cylinder ,for centering and positioning the suction valve body assembly.
The guider consists of the guide way and the inner sleeve embedded in the guide way.The material of the guide way is ZG35CrMo, and the inner sleeve is treated by 20CrMnTi carburization and quenching.
Brand
Model
Emsco
F-350
F-500
F-650
F-800
F-1000
FA-1300
FB-1300
FA-1600
FB-1600
Gardener Denver
PZ-7
PZ-8
PZ-9
PZ-10
PZ-11
National
7-P-50
8-P-80
9-P-100
10-P-130
12-P-160
IDECO
T-800
T-1000
T-1300
T-1600
Oil Well
A-350
A-560
A-650
A-850
A-1100
A-1400
A-1700
China
3NB-350
3NB-500
3NB-800
3NB-1000
3NB-1300
3NB-1600
3NB-2200
API 7# Full Open Valve Seat for Mud Pump
Product Description
1.Stem-guided Valves& Cross-arms Seats
Stem-guided valve and cross-arms seat features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positibe sealing.
2.Three-wing valves and full open seats.
Three-wing guided valves and full open seats features greater fluid flow than four wing valves, the unibody forged valve features greater strength than traditional welded wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
3.Double angle O-ring valve
The Double angle O-ring valve is made with a tough one-piece body to run more hours between change outs. Its made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump.
Brand
Model
Emsco
F-350
F-500
F-650
F-800
F-1000
FA-1300
FB-1300
FA-1600
FB-1600
Gardener Denver
PZ-7
PZ-8
PZ-9
PZ-10
PZ-11
National
7-P-50
8-P-80
9-P-100
10-P-130
12-P-160
IDECO
T-800
T-1000
T-1300
T-1600
Oil Well
A-350
A-560
A-650
A-850
A-1100
A-1400
A-1700
China
3NB-350
3NB-500
3NB-800
3NB-1000
3NB-1300
3NB-1600
3NB-2200
High Pressure Low Torque Plug Valve
Product Description
These Plug Valves are designed to meet the needs and requirements of the oilfield. They can withstand the high erosion rates and pressures encountered in today's operating environment.
Working Principles and Features:
The plug valve consists of the valve body, plug cap, plug and etc.
The plug valve is available with the union 1502 inlet and outlet preparations (also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing.
The metal-to-metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability.
Technical parameter
Product Name
API 6A high pressure plug valve
Material Class
AA-EE
Working Media
crude oil and natural gas
Standard
API 6A
Pressure
high pressure
Brade
Ruier
Processing Type
forging
Performance Requirement
Pr 1-2
2" 105MPa Fig1502 Low Torque Plug Valve
Product Description
The API low torque plug valve is a necessary part that is utilized on the high pressure manifold for the cementing and fracturing operations in oil field and also suitable to control over the similar high pressure fluid.
Featuring the compact structure, easy maintenance, small torque, rapid opening and easy operation, the plug valve is ideal for the cementing and fracturing manifolds.
The API low torque plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union 1502 inlet and outlet preparations(also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing.
The metal to metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability.
The valve can be easily opened or closed even under the 10000psi high pressure.
Ja-3 Type Of Shear Relief Valve Is Used For High Pressure Drilling Rig Operation And Other Medium (water Or Oil) With High Pressure Circuit System. To Compare With Spring Type Or Diaphragm Type Of Relief Valve It Has The Following Features:
1. It Can Be Opened , Closed And Reset Simply;
2. Pressured Piston Area Is Small;
3. Be Interchangeable And Easy To Be Connected With Other Mud Pump.
Up To The Required Qty
Tapered Packing Element for FH54-14
Basic Info
Type: API 16A BOP Parts
Usage: for API 16A BOP FH54-14
Certification: API 16A + ISO
Size: 21 1/4" 2000PSI
Material: NBR
HS Code: 84314310
Product Description
API 16A BOP Annular BOP Packing element Spherical or Tapered Features:
1)Standard: API
2)Pressure: 2000~15000psi
3)Size: 7-1/16" to 21-1/4"
4)Annuar/Tapered type Available
5)Quick delivery.
6)Can interchange with shaffer hydril SK Rongsheng's packing element
API Spec 16A BOP Packing Elements Main technology parameters
1, Working pressure 2000~15000psi (21~70MPa)
2, Nominal bore7 1/16~21 1/4"(179.4~540mm)
3, According to the latest API Spec 16A standard, and quality standard of ISO9001.
Hinged Non-welded Casing Centralizer
Product Description
Casing centralizer is one of the necessary conventional casing accessories, upon well operationscompletion, the rational use of casing centralizer can play the role of:Reducing lower casing resistance phenomenon, making the casing smoothly down to the design position; Making casing centralizer centered within the well; Reducing the sticking phenomenon to make the annular space hydrostatic pressure balanced; Reduce channeling, improve the mud replacement efficiency, thus improve the cementing quality.
The reset force of double bow type centralizer is higher than that of single bow centralizer, centering centering performance is better than that of single bow type.
Bow-spring centralizer
1.These Centralizers are designed for High Restoring Force and Low Starting Force for centralizing the casing pipe in a Vertical, Horizontal and Deviated well
2.Premium quality Bows are made of special alloy steel and hot formed in totally controlled heat treatment plant to achieve the uniform hardness all over
3.Spec and performance index of bow spring casing centralizer meet API Spec 10D. The woven centralizer is connected by pin when in use, the unfolded centralizer can be stacked flatly for convenient storage and transportation.
Rigid roller centralizer
Rigid casing centralizer is used in deviated wells and horizontal wells. There are several blades on the rigid roller centralizerthat can keep casing from contacting the wellbore wall
Roller rigid centralizer
which is most suitable for highly deviated wells and horizontal wells has two or three rollers in each blade. It can change slipping friction to rolling friction, so the Roller rigid centralizer greatly reduces the friction between casing and wellbore wall and let casing go to desired position smoothly.
Cast aluminum centralizer:
The smooth spiral 360 overlap solid vane design of centralizers provide max wall contact will not damage wellhead equipment, has high impact and shock resistance comand fluid swirl. The 30slope from the body to the height of the vane will eliminate scraping, or digging into the formation.
The solid cast aluminum centralizers bine with high tensile and yield strengths
Single Piece Casing Centralizer
Product Description
API single piece centralizer performs satisfactorily in open hole as well as cased hole.These high quanlity product,developed to meet and exceed API 10D specifications for use in highly demanding downhole conditions.Single piece centralizer combines the highest restoring force with zero start force and zero running force.The single piece centralizer is used to position the casing in the center of the wellbore in vertical deviated and horizontal wells.
The single piece centralizers are one piece construction in special high strength steel which imparts excellent hardness and spring action ensuring an unmatched ability to come back to its original shape after undergoing rigorous stress loads conditions.
The single piece centralizers are available in size 4-1/2" to 20".Any special sizes or combination can be available on requirment.
This centralizer undergoes a special Iron Phosphate coating process to prevent it from rust and coated with special Polyester Powder. It is shipped in assembled condition only. When shipping them,in order to save space and shipment charges for customers,we usually put the smaller size centralizer into bigger size centralizer.
Integral Type Shenkai Double Ram BOP Rubber Seal
Product Description
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
Apply to below BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type:Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & bottom connection:Flanged,studded
Main Parameters
1)Standard: API
2)Pressure: 2000~15000psi(14-70Mpa)
3)Size:Nominal bore7 1/16~21 1/4" (179.4~539.75mm)
4) U type, S type Available
5) Shear/ Pipe/Blind Ram
6) According to the latest API Spec 16A standard,and quality standard of ISO9001.
API 7-1 IB String Stabilizer with Non-magnetic Body
Product Description
The stabilizer with back reaming is selecting the appropriate location and through special processing method to array few teeth as a cutting edge. In this way, this stabilizer can be played cutting when the process of drilling and pull out. During drilling process, forward and backward redressing can be played the role to repair and maintain the wall of well, making trajectory of borehole as far as possible, more often than not leading to drilling difficulty because of hole shrinkage, and so on, at the moment, the forward and backward redressing of this stabilizer can be played cutting, to eliminate hole shrinkage phenomenon, thus saving time and costs for drilling.
Features
(1). Sizes and configurations can be manufactured to operators requirements, including blade sizes, connections, and types of material.
(2). All stabilizers connections can be configured as box Ã? box, as pin Ã? box, or as the operator requires.
(3). Welded straight blade for drilling soft formations.
(4). Sleeve type allowing less equipment inventory in remote locations.
(5). Integral spiral blade allowing 3600 hole contact for use in hard rock formations.
(6). Nonmagnetic stabilizers for applications requiring magnetic isolation.
API Downhole N80 Washover Pipe
Washover Pipe
Description - Washover Pipe:
Washover pipe is a special tool to release the stuck section of drill string in the well bore. TIANHE offers a complete range of washover pipe in the industry. TIANHE unique FJWP thread is a two-step double shoulder thread which assure quick make up and high torsion strength.
Specifications - Washover Pipe
API Downhole N80 Washover Pipe
Washover pipe accessories:
Drive Sub
Drive Subs provide the crossover connection between fishing string and the washover pipe. Each is machined from high-grade alloy steel and heat treated to provide maximum strength and durability.
Lift Plug
Lift Plug is designed to provide an economical method of handling washover strings. It is available in all thread types and size, has sufficient shoulder diameter to support handling the washover string.
Washover Safety Joint
Washover safety joint is manufactured to provide safe and easy release and make-up whenever disengagement from the washover string becomes necessary. This dependable, field-tough tool is designed to transmit torque in either direction when placed in the washover string.
Rotary Shoes
Rotary Shoe are manufactured from specially heat treated alloy to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore.
API Downhole N80 Washover Pipe
API Downhole N80 Washover PipeAPI Downhole N80 Washover Pipe
Anhydride cured epoxy / aromatic amine cured epoxy GRE casing
Standard:
1.API 15HR 2.API 15LR 3.SY / T 6267-2006 4.SY / T 6266-2004
Temperature rating:
Anhydride curing epoxy system of long-term temperature â?¤ 65 , the maximum temperature 80
Aromatic amine-cured epoxy system of long-term temperature â?¤ 93.3 , the highest temperature 135
Minimum temperature epoxy pipe products â?¥ -35
High Pressure GRE Pipe API 8RD Thread Fiber Glass Pipe
High Pressure GRE Pipe API 8RD Thread Fiber Glass PipeHigh Pressure GRE Pipe API 8RD Thread Fiber Glass PipeHigh Pressure GRE Pipe API 8RD Thread Fiber Glass Pipe
High Pressure GRE Pipe API 8RD Thread Fiber Glass Pipe
Company Information
Lake Petro company is a professional supplier of various oilfield equipment, including oil drilling and service equipment,oil production equipment,OCTG ,wellhead & downhole tools and spare parts with API certification. Following the principle of "quality first, science and technology innovated, people oriented", every Lake Petro person is sparing no effort to provide the customers with best products and services. Through efforts of Lake Petro staff, our products have already been exported to USA, South America, Africa, Middle East, Russia and some other countries (regions). With super quality, reasonable price and professional service, Lake Petro company has become VIP (assigned) supplier and built strategic partnership with some coutries' national petroleum companies.
High Pressure GRE Pipe API 8RD Thread Fiber Glass PipeHigh Pressure GRE Pipe API 8RD Thread Fiber Glass Pipe
FAQ
How to order?
Please send us your inquiry with detail item description or with Model number.
If there is no packing demand we take it as our regular exported standard packing.
We will offer you an order form for filling. We will recommend you the most suitable model according to information you offered.
You send us your detail requirement, we provide quotation to you.
Can I expect a quality products?
All the production and processing are strictly according to ISO 9001:2008 and API standard. At the same time, mature production technology ensuring the quality satisfy international request. We also welcome the third party inspection, such as BV, SGS and TUV.
The information you may like to know before Payment:
1. Methods of Payment:
T/T (Telegraphic Transfer) or L/C at sight
2. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.
3. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
2-7/8" NUE Tubing Coupling API 5CT
Product Description
Tubing & Casing Coupling
Coupling is the joining of two short length pipes by the means of male and female threads.
All types of couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread forms. Couplings are strictly designed as per API specifications.
There are two types of tubing couplings widely used in the pipeline coupling manufacturing industries namely:
Non-upset Thread Tubing Coupling
External-upset Thread Tubing Coupling
Oil Pipes
Keywords: API 5CT Steel Pipe, J55, K55, L80, N80Q, C90, T95, P110 Oil Pipe, Tubing, Petroleum Casing Pipe, OCTG
1) Size: O.D. 1.900", 2-3/8", 2-7/8", 3-1/2", 4-1/2"
2) Grade: J55, N80, L80, C90, T95, P110
3) Wall thickness: 3.18 - 10.54mm
4) Length: R1, R2, R3
5) Thread: 8RD and 10RD
6) All our Tubing are designed and manufactured according to API SPEC 5CT standard
Api oilfield power swivel
Power swivel is the device installing on the derrick of servicing rig, to provide rotating power. Except the use for such workover jobs as casing milling, milling, drilling cement plug and bridge plug and fishing, it is also used for sidetracking drilling, drilling open hole and coring. The product is designed and manufactured according to api 8c specifications.
Standard chiksan joint/chiksan swivel joint
Product description
1).Size: 2'', 3'', 4''
2).Working pressure:6000-20000psi(42mpa-140mpa)
3).Working temperature: -29°c~121°c.
4).Application enrvironment: standard or h2s
5).Standard: api standard
1 our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa.
2 various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa).
3 we can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4 patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5 all sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment.
6 sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7 usually good lubrication can ensure that swivel joints work normally without much maintenance.
API 7K Type WA-T Safety Clamps
Safety clamps are tools for handling flush joint pipe and drill collar.
There are two kinds of model of safety clamps: WA-C safety clamps can accommodate pipe from 3 1/2~15 5/8 in (88.9-396.9mm)
O.D.. Model WA-T safety clamps can accommodate pipe from 1 1/8~4 1/2 in (28.6-114.3mm) O.D.
Api vacuum insulated tubing
Skype: julia0402zcy wechat: juliazcy
Product name: pre-stressed vacuum insulated tubing/casing
Product explanation: 1. Reduces the heat loss, ensures the steam quality being injected into the oil formation as well as the depth of steam injection can be increased. 2. Minimizes heat stress on well casing and cement mantle, protect the casing from damage by high temperature. 3. During oil production it will provide superior insulation and greatly reduce the loss of heat energy
Product features:
1. The pre-stress will compensate the tubing expansion caused by temperature difference between the inner and the outer tubes so as to ensure reliable operation under high temp.
2. Gas absorbing materials are packed inside the annulus to clean up harmful gases and maintain good insulating property whilst in service.
API 5B Calibrition Casing Thread Gage
Product Description
API casing and tubing thread Gauge:
Used for checking API internal & external thread.
Conform to: API 5B and 7.
CSG,LCSG,LP,BCSG,TBG,UPTBG
Gooseneck Assembly for JH Top Drive
Product Description
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
Below are pictures of Gooseneck and Flange end for JH Top Drive DQ70, for Russia clients.
If you need any related parts or tools, freely ask me.
FMC Butt Welding 15000PSI FIG1502 Hammer Union
Product Description
Hammer union is mainly used in oil industry in high-pressure pipline connectio. Size have 1" to 5", work the pressure 7Mpa to140Mpa(1000psi-20000psi), the API 6A and 16C cetification, prevent H2S union according to the NACE standard MAr0175.
Design features:
1.with self-lockubf type ACME thread design;
2. repd tightening and remove;
3. made by international standard, and can be interchangeable with imported parts;
4. Seal with high pressure resistance;
5.Using NC mechine tool processing Seiko degree is high;
6. Type, specification identifies die forging on the wing nut, identification and convenient;
Linear Shale Shaker Screen Equal to FLC2000
Product Description
Steel frame screens are mostly applied to the shale shakers with wedge fastening equipment. The screen frames adopt that high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. These screens are constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be used to repair rips or tears. By doing this, we can cut down time and reduce the production costs. We can supply steel frame screens with mesh sizes ranging from 20 to 250.
Steel frame screen is in common used presently, that are constructed mostly withe two or three stainless steel layers bonded tightly to the steel frame.The frame is made up of the high-strength square steel tube or flat steel welded to multi- ribbed construction.These layers are coupled with the frame through metal backing plate or bonded straightly as well.We possess the strong experience and the ripe technology,and will provide various specifications of steel frame screens to serve the clients' demands.
Features of Steel frame screen
1) Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better.
2)High strength frame, multi-ribs and the mesh cloth with moderate tension , from one reliable combination , which can increase screens acceptable flow , the intensity and the lifetime
3)The wedge-shaped fastening device, can make the erection of screens more handily and quickly
4)The mesh divided into many independent small units by grids of the backing plate ,can prevent rips or tears from spreading overmuch. Accessory prepared rubber stoppers
Composite screen(Shale Shaker Screen)
Composite screen is made by composite plastic frame and stainless steel wire mesh, because the composite plastic material itself has great toughness, plasticity so could increase of service life.
Model of
Shale Shaker Screen
Dimension
Mesh Range
Weight
Swaco Mongoose
1165*585mm
20-325
14kgs
Swaco MD-3
610*650mm
20-325
12kgs
Lower Crosshead Guide Plate
Product Description
All products will be made according to API and related international standard as per customers' requirements.
Crosshead guide are made of ASTM A48-83 meehanite featuring god abrasion resistance and long service life. And the crosshead slide we supplied is applied for F series mud pump.
We can provide crosshead guide plate for all sorts of mud pumps.Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
EMSCO
F-350
F-500
F-650
F-800
F-1000
FB-1300
FB-1600
Oilwell
A-350-PT
A-560-PT
A-600-PT
A-1100-PT
A-1400-PT
A-1700-PT
IDECO
T500
T800
T1000
T1300
T1600
Gardener Denver
PXL
PAH
TEE-5
PZ-7
PZ-8
PZ-9
PZ-10
PZ-11
Ntional
JWS-165
JWS-340
7-P-50
8-P-80
9-P-100
10-P-130
12-P-160
jws-400
Ellis Willimas
WW-440
14W-440
15W-500
9W-1000
OPL
OPI-700
OPI-1000
Brewster
B-550
B-750
B-1000
1100T
B-1300
Wilson
600
900
