24 bit accuracy, have been calibrated all signal input before ex factor. Also, users can programme himself, two input types must be same when testing two signals.
Communication software:
Communication interface: 1 standard rs485 interface or 2 standard rs232 interface
Communication agreement: standard ascii, modbus, can make network communicate
With plc, rtu or watch software.
Data format: 10 bit, 1 start bit, 8 data bits, 1 stop bit.
Communication address (0~255) and baud rate (300\600\1200\2400\4800\9600\19200\
38400bps), max. Communication distance: 1200m, connect by both twists shiled cable. ¡¨¤ 15kv esdprotection, communication response time is less than 100ms.
Anti jamming:
Set checksum according to need. Its inside contains momentary bate diode, can
Restrain surge impulse, protect modules.
Model selection:
Iso 4021a u(a) -
Input voltage or current signal
U1: 0-5v a1: 0-1ma
U2: 0-10v a2: 0-10ma
U3: 0-75mv a3: 0-20ma
U4: 0-2.5v a4: 4-20ma
U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma
U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma
U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma
U8: customized a8: customized
Communication interface
485: output is rs-485 interface
232: output is rs-232 interface
232/485: output is rs-232orrs-485interface, rs232/485 switchover freely
Size:62*51*83mm
Measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set
Model selection
Isoad16 u(a) -
485: output is rs-485 interface
232: output is rs-232 interface
Dimension:83*51*62mm
Features:
> > 8 channel 4~20ma signal acquisition, channel to channel is isolated
> > testing accuracy> 0.05%
> > rs485/232 output, can programme the accuracy of module
> > input/output/power supply three-port isolation: 3000vdc
> > wide power supply: 8~50vdc
> > high reliability, programming convenience, easy to install.
> > users can set module address, baud rate.
> > support modbus rtu communication protocal
Applications
> > temperature signal testing/monitoring/cintrol
> > rs232/485 industrial automation control system
> > industial field signal isolation
> > process monitoring & control
> > test sensors signal
> > laboratory data acquisition
> > medical machine monitoring
> > 4~20ma signal acquisition
Dimensions:123*70*30mm
L-signal measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set compatible with the adam modules, the baud rate is set by the user, with other manufacturers control module hanging in the same rs-485 bus, to facilitate host programming.
Iso ad series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory eeprom inside.
Isoda series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000vdc isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80.
Model selection
Isoad16 u(a) -
Vin/iin
U1: 0-5v a1: 0-1ma
U2: 0-10v a2: 0-10ma
U3: 0-75mv a3: 0-20ma
U4: 0-2.5v a4: 4-20ma
U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma
U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma
U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma
U8: customized a8: customized
Communication interface
485: output is rs-485 interface
232: output is rs-232 interface
Dimensions:58*87.5*59mm
Characteristic:
Efficiency grade: 0.1/0.2/0.5
International standard signal input: 0-5v/0-10v/1-5v, 0-10ma/0-20ma/4-20ma
Output internal signal with high load capability: 5v/0-10v/1-5v, 0-10ma/0-20ma/4-20ma and so on
U3: 0-75mv P3: dc5v O4: 0-5v
U4: 0-2.5v P4: dc15v O5: 0-10v
U8: customer choose P8: customer choose O6: 1-5v
A1: 0-1ma O8: customer choose
A2: 0-10ma
A3: 0-20ma
A4: 4-20ma
A8: customer choose
Example:
Eg1: input: 0-5v Accessorial power supply: 24vdc Output: 4-20ma Model: din 1x1 iso-u1-p1-o1
Eg2: output: 4-20ma Accessorial power supply: 24vdc Output: 4-20ma Model: din 1x1 iso-a4-p1-o1
Dimension:62*51*83mm