EDAM-8520U4
Isolated RS-232 to 4-CH RS-485 converter (Iso RS-232)
* True RS-485 Star Wiring Hub
* Surge protection on RS-485 line
* The RS-485 Short-circuit protection
* Isloated on RS-232 side
* Auto direction flow control on RS-485
* Independent RS-485 driver for each channel
* Transmission speeds of up to 115kbps or 6 Kbps (E-8520U4F)
* Power and data flow indicator for trouble shooting
EDAM-8521
Isolated Addressable RS-485/422 to RS-232 Converter
* Addressable RS-485/422 to RS-232 Converter
* Support Addressable or Nonaddressable mode
* RS-232 support RTS, CTS handshake signal
* Transmission speeds of up to 115.2 kbps
* RS-232/RS-485 can be set to different baud rates
* Support ASCII format and Modbus-RTU protocol
* Surge protection on RS-485/422 line
* Minimum 3000 VDC isolation protection
* Power and data flow indicator for trouble shooting
EDAM-8530
ISO USB to RS-232 / RS-422 / RS-485 converter
* Automatically switch USB signal to RS-232/RS-422 or RS-485
* Driver support for Windows 95/98/ME/2000/XP/Vista/7
* Power and activity indicator for troubleshooting
* Auto switching baud rate up to 115.2 Kbps
* Reserved space for termination resistors
* Minimum 3000 VDC isolation protection
* Mounts easily on DIN-rail or panel
* Full-duplex RS-232/RS-422 support
* RS-232 RTS & CTS signals support
EDAM-8531
ISO USB to RS-422 / RS-485(TX,RX,RTS,CTS) convert
* Automatically switch USB signal to RS-422 or RS-485
* Driver Support For Windows 98/ME/2000/XP/Vista/W7
* Power And Activity Indicator For Troubleshooting
* Auto Switching Baud Rate Up To 115.2 or 921.6 Kbps
* Reserved space for termination resistors
* Minimum 3000 VDC Isolation Protection
* Mounts Easily On Din-Rail Or Panel
* Supports RS-485 full(4-wire) / half(2-wire) duplex
* RS-422 RTS & CTS Signals Support
EDAM-8000 series: RS-485 Digital and Analog I/O Remote Control Modules
Overview:
EDAM-8000 is a series of data acquisition modules. It provides a total solution of the data acquisition network and control system.
Including the communication modules, the analog input modules, the analog output modules, and the digital I/O modules.
You can remotely control up to 256 EDAM modules on RS-485 network.
4 analog output and 4 digital input channels module
* 4 isolation analog output channel .
* 14 bits Analog Resolution
* Programmable voltage/current range with slew rate.
* 4 channels isolation digital input
* 3000 Vrms isolation voltage for A/O channel
* Programmable power-on value and safe value
* Programmable host watchdog timer for host failure protection.
* Support ASCII format and Modbus-RTU protocol
14 Channels Isolated Digital Input Module
* Support 8 non-isolated digital output
*Open Collector Output (NPN)
* 14 Isolated Single-Ended input channels
* Input channel support max. 50Hz counter
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format
8 Non-Isolated digital input and 8 Non-Isolated digital output (NPN)
* Support 8 non-Isolated digital output
*Open Collector Output (NPN)
*Support 8 non-isoloated digital input channels
*Input channel support max.50Hz counter
* Programmable Host Watchdog Timer for Host Failure Protection
*Support Modbus RTU and ASCII Format Protocol
16-CH Input module W/LED
* Support 16 isolated Input channels.
* Input channel support max. 50Hz counter
* Programmable Host Watchdog Timer for Host Failure Protection.
* Support Modbus and ASCII Format Protocol.
8 Isolated differential digital input
* Support 8 isolated differential digital input
* Input channel support max. 50Hz counter
* Programable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
16 Non-Isolated digital input channels
* Support 16 non-isolated digital input channels
* Input channel support max. 50Hz counter
* Programable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol.
8 Isolated digital input and 8 Isolated digital output
* Support 8 Isolated digital output
* 650mA current Sink per DO channel
* Support 8 isolated digital input channels
* Input channel support max. 50Hz counter
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format
8 Isolation with differential AC Input (max. 80VAC), with LED
* Support 8 isolated differential AC digital input
* EMS Protection (IEC-61000-4-2 (EDS)Level 4)
* Programable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
4-ch ISO DI and 4-ch relay Output with LED display
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 4 relay output channels(RL1~RL4)
* RL1,RL2: Form A, RL3,RL4: Form C
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
8-ch ISO DI and 3-ch AC-SSR Output with LED display
* Support 8 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 3 relay output channels (Form A)
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
8-ch ISO DI and 3-ch DC-SSR Output with LED display
* Support 8 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 3 DC-SSR output channels
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
5-ch ISO DI and 5-ch AC-SSR Output with LED display
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 5 AC-SSR output channels
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
EDAM-8018A
8 Isolated Analog/Thermocouple Temperature Input Module
* Support Thermocouple J.K.T.R.S.E.B.N.C Type
* Protocol MODBUS RTU, ASCII Command
* Support Isolated input channels
* Fully photo-isolation 3750Vrms
* Wide supply voltages (10-30V)
* Built-in TVS / ESD protection
* Burn-out auto detection
EDAM-8067AD
8 channels Isolated Relay Output (5A/250Vac, 5A/30Vdc)
* 8-Channels relay Output
* Normal Open Relay Output(Form A)
* Relay contact rating 5A/250Vac, 5A/30Vdc.
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format
EDAM-9015
Ethernet-Based 7-ch RTD Input Module
* Support PT100,PT1000, Balco 500,NI604, NI1000 RTD Types
* Support Protocol Modbus/TCP, TCP/IP, UDP, ICMP, ARP
* Ethernet 10/100 Based-T Communication
* Support Isolated Input Channels
* Fully Photo-Isolation 3750Vrms
* Wide Supply Voltages (10-30V)
* Bulit-in TVS/ESD Protection
* Bulit-out Auto Detection
EDAM-9017
Ethernet-Based 8-ch Isolated Analog Input Module
* Support protocol Modbus / TCP/ IP, UDP, JCMP, ARP
* Provides two digital outputs (open collector)
* Ethernet 10/100 Based-T communication
* Support isolated input channels
* Support +- V, +- mV, mA analog input
* Fully photo-isolation 3750Vms
* Built-in TVS/ESD protection
* Wide supply voltage (10-30V)
EDAM-9050AB
Ethernet ISO 12 DI (wet contact) / 6 DO module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 6 Isolated digital output channels (NPN).
* Provide Pulsed/delay Output Mode
* Support 12 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Wet Contact Inputs
* Fully Photo-Isolation 3750Vrms
* Status LED indicator
EDAM-9051
12 DI, 2 DO and 2 Counter channels Digital I/O Module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 2 Isolated digital output channels (NPN).
* Provide Pulsed/delay Output Mode
* Support 12 Isolated digital Input Channels
* 2 counter (4.5 KHz) input channels
* Support Dry Contact Inputs
* Fully Photo-Isolation 3750Vrms
* Status LED indicatorr
EDAM-9052AB
Ethernet 8-DI ISO (Dry/Wet contact) and ISO 8-DO module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 8 isolated digital output with Open Drain.
* Provide 3A/per output channel.
* Provide Pulsed/delay Output Mode
* Support 8 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Dry/ Wet Contact Inputs
* Fully Photo-Isolation 3750Vrms
EDAM-9053A
12 DI (Dry/Wet contact) and 4 DO channels Digital I/O module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 4 Isolated digital output channels (NPN).
* Provide Pulsed/delay Output Mode
* Support 12 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Dry/ Wet Contact Inputs
* Fully Photo-Isolation 3750Vrms
* Status LED indicator
EDAM-9061A
6-channel Digital Input and 6 RELAY (0.6A/AC, 2A/DC) Output module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 6 relay channels. (Form A)
* Provide Auto-Off Time of digital output
* Support Automatic DIO Synchronization func.
* Support 6 Isolated digital Input Channels
* Provide Counter Inputs Mode
* Support Dry/Wet Contact Inputs
* Provide PoE function(only for EDAM-9461)
* Fully Photo-Isolation 3750Vrms
13 Channels Isolated Digital Output Module
* 13 Isolated Single-Ended output channels
* Open Collector Output (NPN)
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format
16 Ch. Non-Isolated Digital Output
* Support 16 non-Isolated digital output ch.
* Open Collector Output (NPN)
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format Protocol
8 Isolated Digital output and 4 Isolated digital input
* Support 8 Isolated digital output channels
* Open Collector Output (NPN)
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format
16 Channels Isolated Digital Output
* 16-ch. Isolated Single-Ended output
* Open drain Output (P-MOSFET)
* Max. Output load current 3A/per channel
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format Protocol
8 Isolation with differential AC Input (max. 250VAC), with LED
* Support 8 isolated differential AC digital input
* EMS Protection (IEC-61000-4-2 (EDS)Level 4)
* Programable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
5-ch ISO DI and 5-ch relay Output with LED display
* Support 5 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 5 Relay output channels (Form A)
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
5-ch ISO DI and 5-ch DC-SSR Output with LED display
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 5 DC-SSR output channels
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
EDAM-8015
6-ch ISO RTD Input module
* Support PT100, PT1000, Balco 500, NI604, NI1000 RTD types
* Protocol MODBUS RTU, ASCII Command
* Support isolated input channels
* Fully photo-isolation 3750Vrms
* Wide supply voltages (10_30V)
* Built-in TVS/ESD protection
* Burn-out auto detection
EDAM-5017
16-ch Analog Input Module with 2-ch Isolated DI and 1-ch DO
* Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command
* Support USB2.0, 10/100 Ethernet, RS-485/232C, CAN (optional)
* Fully photo-isolation 3750Vrms
* Wide supply voltages (10~30V)
EDAM-5019
16-ch Thermocouple Input Module with 2 iso. DI and 1 DO
* Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command
* Support USB2.0, 10/100 Ethernet, RS485/232C, CAN (optional)
* Support Thermocouple J, K, T, R, S, E, B, N, C Type
* Support isolated input channels
* Fully photo-isolation 3750Vrms � Wide supply voltages (10_30V)
* Built-in TVS/ESD protection
* Burn-out auto detection
EDAM-9063A
7-channel Digital Input and 3 RELAY Output module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 3 relay output channels (Form A)
* Provide Pulsed/delay Output Mode
* Support 7 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Dry/ Wet Contact Inputs
* Fully Photo-Isolation 3750Vrms
* Status LED indicator
8 Isolated digital input and 3 relay output
* Support 8 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 3 relay output channels (Form A)
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
EDAM-9060A
5-channel Digital Input and 3 RELAY Output module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 3 relay ch. (RL1/Form A,RL2/3 Form C)
* Provide Pulsed/delay Output Mode
* Support 5 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Dry/ Wet Contact Inputs
* Fully Photo-Isolation 3750Vrms
* Status LED indicator
EDAM-8066D
8-ch Photo-MOS relay Output module with LED display
* 8-Channels Isolated Output
* Normal Open PhotoMOS Relay Output
* Typical applications:
â?§ High-speed inspection machines
â?§ Telephone equipment
â?§ Data communication equipment
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format Protocol.
EDAM-8067D
8-ch relay(0.5A/120Vac, 1.0A/24Vdc) Output module with LED display
* 8-Channels relay Output
* Normal Open Relay Output(Form A)
* Relay contact rating 5A/120Vac,1A/24Vdc.
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS RTU And ASCII Format
6-ch ISO RTD Input module
* Support PT100, PT1000, Balco 500, NI604, NI1000 RTD types
* Protocol MODBUS RTU, ASCII Command
* Support isolated input channels
* Fully photo-isolation 3750Vrms
* Wide supply voltages (10_30V)
* Built-in TVS/ESD protection
* Burn-out auto detection
16-ch Analog Input Module with 2-ch Isolated DI and 1-ch DO
* Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command
* Support USB2.0, 10/100 Ethernet, RS-485/232C, CAN (optional)
* Fully photo-isolation 3750Vrms
* Wide supply voltages (10~30V)
EDAM-9052
8 DI and 8 DO channels Digital I/O Module
* Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
* Ethernet 10/100 Based-T Communication
* Support 8 isolated digital output with Open Drain.
* Provide 3A/per output channel.
* Provide Pulsed/delay Output Mode
* Support 8 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Dry Contact Inputs
* Fully Photo-Isolation 3750Vrms
EDAM-9050
12 DI and 6 DO channels Digital I/O Module
* Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP
* Ethernet 10/100 Based-T Communication
* Support 6 Isolated digital output channels (NPN).
* Provide Pulsed/delay Output Mode
* Support 12 Isolated digital Input Channels
* Provide Counter/ Frequency Inputs Mode
* Support Dry Contact Inputs
* Fully Photo-Isolation 3750Vrms
* Status LED indicator
EDAM9000 Ethernet module
Including:
Analog I/O module
Digital I/O module.
EDAM8000 RS-485 modules (Converter and Repeater)
Including:
Analog I/O module
Digital I/O module
PC-based intelligent controller.
EDAM5000 USB, TCP/IP, RS232/485 module
Including:
Analog I/O module
Digital I/O module.
8 Isolated Analog/Thermocouple Temperature Input Module
* Support Thermocouple J.K.T.R.S.E.B.N.C Type
* Protocol MODBUS RTU, ASCII Command
* Support Isolated input channels
* Fully photo-isolation 3750Vrms
* Wide supply voltages (10-30V)
* Built-in TVS / ESD protection
* Burn-out auto detection
EDAM-8065BD
5-ch ISO DI and 5-ch DC-SSR Output with LED display
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 5 DC-SSR output channels
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
EDAM-8024
4 analog output and 4 digital input channels module
* 4 isolation analog output channel .
* 14 bits Analog Resolution
* Programmable voltage/current range with slew rate.
* 4 channels isolation digital input
* 3000 Vrms isolation voltage for A/O channel
* Programmable power-on value and safe value
* Programmable host watchdog timer for host failure protection.
* Support ASCII format and Modbus-RTU protocol
EDAM-8066D
8-ch Photo-MOS relay Output module with LED display
1. 8-Channels Isolated Output
2. Normal Open PhotoMOS Relay Output
3. Typical applications:
* High-speed inspection machines
* Telephone equipment
* Data communication equipment
4. Programmable Host Watchdog Timer For Host Failure Protection.
5. Support MODBUS RTU And ASCII Format Protocol.
EDAM-8065AD
5-ch ISO DI and 5-ch AC-SSR Output with LED display
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 5 AC-SSR output channels
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
EDAM-8060D
4-ch ISO DI and 4-ch relay Output with LED display
* Support 4 isolated digital input channels
* Input channel support max. 50Hz counter
* Support 4 relay output channels(RL1~RL4)
* RL1,RL2: Form A, RL3,RL4: Form C
* Programmable Host Watchdog Timer For Host Failure Protection.
* Support MODBUS And ASCII Format Protocol
