ESD rubber mat or conductive ground mats should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc. To eliminate damages caused by static electricity. When ESD rubber mat (ground mats) are laid out and grounded, the working surface will discharge the static electricity of human bodies so that a near-equipotential can be maintained for ESD tweezers, tools, utensils and instruments, through which human bodies contact the working table and static sensitive devices(SSD) are free from broadband interference produced by static discharging such as triboelectrification etc. In this way, electrostatic protection is realized.
ESD rubber mat are mainly made of anti-static(conductive) and static-dissipative materials, and synthetic rubber. The surface layer is a 0.5mm thick static-dissipative layer. The bottom layer is a 1.5mm conductive layer. Generally, 2mm thick double-layer structure is used. The available colors include green, gray, blue, black and yellow etc.
*Resistivity of surface layer: 107-10¦¸9
*Resistivity of bottom layer: 103-10¦¸5
*Rattler loss: < 0.02g/cm2
*Time for static dissipation: < 0.5S
*Length, width, thickness and colors are selectable
Conductive ground mats are made of quality conductive material and synthetic rubber.
Resistivity of surface and bottom layers: 103¦¸-105¦¸. The black color is normally used.
one roll per paper carton, dimension: 18x18x110cm, 30kg per roll.
Wiper rolls are widely used for under stencil cleaning to wipe off solder paste in the SMT printing process. Most of them are used only once, then are disposed of with other solder waste. Recycling wiper rolls not only reduces emissions but also reduces lumber usage.
In addition, tests have shown that repeated cleaning of wiper rolls does not compromise the performance when cleaning stencil apertures.
Made of 55% cellulose and 45% polyester, plyester/rayon composite non-woven fabric.Suitable for SMT machinery of MPM, DEK, JUKI, ERKA, FUJI, Sanyo, Yamaha, Panasonic, KME and Minami brands.
50 rolls per paper carton, dimension: 58x40x50cm, 21.0KG.
Wrist Band make directly contact with skin, through button on the metal plastic buckle and grounding kits, transmit the electrostatic from skin. Wrist band is made of various conductive compound materials, such as silver-gilt fiber and elastic nylon thread, stainless steel fiber, conductive plastic buckle, also have metal wrist strap with metal stretch watch.
In despite of which material, wrist band must be satisfied with two points, one is wrist band (be closed to skin) volume resistivity with ¦Ñ V¡Ü 102¦¸ Cm, second is wrist band must be elasticity or can be adjustable, be suit for different wrist can be closed tightness to skin.
Metal plastic buckle likes plate, joint wrist band and grounding cord, adjust the contact between wrist band and skin. There are three types of button with 4mm, 7mm and 10mm.
