Supplier: Electrical testing and measuring instrument, high voltage withstand instrument, battery test, resistance test, power transformer, relay protection test, high voltage switch test, power cable test, ZNO arrester test, SF6 gas test, oil test, electrical evergy test, electrical safety tool
According to:
Technique Regulation of Concrete Defect Detection with Ultrasonic CECS21: 2000
Depth measurement principle
When vibration energy transmits through the concrete and passes the crack, the vibrate energy will be diffracted at the point of the crack, whose diffraction angle has geometrical relationship with the crack depth. DJCS-05 crack depth measurement instrument adopts this geometrical between the diffraction angle and depth to realize high precision depth measurement.
Feature and Specification
Easily operation: Start measure when turn on, simply press to finish testing.
Result Intuition: No wave speed test and calculate to display the crack depth directly
Data processing: Data can transfer to PC, and then generate test report rapidly.
Depth scale: 10-350mm
Test precision: 5%
Data storage: 10600 depth data
Display: 4” Resolution 160*128
Power supply: 9VDC (6 AA battery)
Work environment: Temperature -5~40centigrade; Humidity 85%
Size: 220*180*80mm
Weight: 1000g
GANZ measuring instruments are made according to the EN 60051;EN 61010-1, and DIN 43780 standards. The accuracy of the instruments is idnicated on the detailed data sheets. (0,5;1;1,5;2,5;3%). The dimensions of the cases and the cut-outs comply with the standard DIN 43700. The instrument cases are made of inflammable plastic according UL 94 V-1 or steel plate. See at the detailed technical data sheet at our website:www.ganzinst.hu.
Tfr is innovative product of taurus designed to measure impedance along with resistance of transmission line t is
Salient features:
Ø the equipment operates at 25 khz which and virtually isolates the parallel transmission
Tower earth path without physical isolation of over head earth wire by use of this high frequency and neutralizing circuits.
Ø reliable, steady, repeatable readings in induced environment
Ø constant current output (20ma) from a high voltage source (250v) to override the noise in the induced environment.
Ø the taurus preziohm tfr is designed to be immune to power frequency and its harmonics
Ø dynamic measurement.
Ø housed in ip67 pelican casing.
Resistance Test Instrument Supplier
ZY9733 and ZY9734 digital desk type low current resistance measuring meters are suitable for units concerned to measure the DC resistance of various components and parts with certain limitations on current, such as platinum resistor, coppery thermal resistor, PTC ceramics, thermistor and various wire rods, etc.
1. Key features
1.1 It adopts a large green LED to display measured value, which is striking and clear. It also adopts the four-terminal resistance measurement method to eliminate the impact of conductor resistance, and the measurement accuracy is high.
1.2 There are a variety of specifications, and each specification has four scales to meet the measurement requirements of different users.
1.3 The test current is lower than similar equipment, which effectively prevents the impact of components and parts on resistance.
1.4 ZY9734 type has a RS-232 serial data output interface to facilitate the connection to computer.
1.5 It adopts a novel plastic shell and can changes the inclined angle between the device and table by adjusting the handle position, so as to determine the suitable panel observation angle. It has a well-designed appearance and is easy to use.
2. Main technical indicators
Temperature: Reference conditions: 20±5; nominal condition: 5~35
Relative humidity: Reference conditions: 40~60%; nominal condition: 25%~75%
Power source: AC 220V±10%, 50Hz, power consumption: About 5VA.
Overview
SA2100 is a handheld multi-functional device which is designed to measure and analyze single or three-phase power system. This portable class S device can provide safe, convenient and accurate measurements for troubleshooting power networks.
SA2100 Portable Power Quality Meters
Portable Power Quality Meters enable electricians and facility maintenance professionals to troubleshoot and benchmark power quality problems over time. They help you identify energy waste in your facility and detect and prevent power problems before they occur.
Why do you need Power quality meter analyzer?
Portable Power Quality Meter identifies power quality problems that often manifest themselves as dips, spikes, harmonic distortion, imbalances, flicker and transients.
Power quality determines the suitability of electrical energy to drive motors, machines and other end-user equipment.
Poor power quality can affect the ability of these devices to operate properly, which can lead to malfunctions, premature failures or possibly cause them to not work at all.
Most power quality analyzers monitor total harmonic distortion, phase angle, power factor, balance, etc. to get a complete picture of the system.
Overview:
The RT6103-S Single Phase Energy Meter Test Instrument (Split Type) adopts internationally advanced new-generation digital power source technologt, integrates all the technological advantages of both domestic and foreign watt-hour meter calibration software, and is introduced to global market by Rowwin Test in a powerful and sensational way. The single phase energy meter test instrument comprises of PWM power source, standard digital energy meter,error processor and PC processing software, this energy meter test instrument can test 3 to 60 various watt-hour meters of Grade 0.5 or lower simultaneously, also is an ideal new-generation multi-position energy meter testing instrument.
Technical Parameters:
1. Accuracy class: 0.1/0.05.
2. Reference standard energy meter£ºSingle phase wide-measurement range standard energy meter.(Accuracy class:0.1/0.05). Multi-path voltage transformer: Accuracy class:0.01; Rated load per path:10VA.
3. Voltage range:220v(240V option),Output range:0~125%,Resolution:0.01%full range.
4. Current measurement range:0.1~100A(200A option),Output range:0~120%,Resolution:0.0001A(minimum)
5. Phase angle:0~360¡ã,Resolution of phase angle setting:0.01¡ã.
6. Frequency:45Hz~65Hz,Resolution:0.01Hz.
7. Output waveform distortion:Both voltage and current<0.5%.
8. Output voltage,current and power stability:<0.05%.
9. Output capacity:Current:1,000VA(120A);Voltage:400VA(24 meter testing positions). If necessary,the maximum load can be extended to Current:1,800VA and Voltage:1,000VA.
10. Load characteristics:Resistive,inductive and capacitive(less than 4uF).
11. Starting current output:5mA(minimum);Accuracy:5%;Starting power:Accuracy 5%.
12. Energy meter testing positions:24/48 standard (3 ~60 meter positions also available).
13. Testing functions:Accuracy testing,Creep testing(no load testing),Starting up testing,Harmonic testing,Repeatability testing, Influencing testing,Dial testing and etc.
14. Input power supply:220VAC,¡À10%,50Hz;Max.power consumption:1,500VA(24 meter testing positions).
Dimension:
24 meter testing positions(1 rack): 2200*700*1920mm.
48 meter testing positions(2 racks): 2200*700*1920mm each.
Cabinet: 600*800*1600mm.
