Product Introduction
SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module.
Unique function
High efficiency over the full load range, full load efficiency greater than 95.5%
Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery
5-inch LCD touch screen, easy to operate
Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate
Main features
Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc.
Three phase active power factor correction technology, reduces the harmonic interference to the grid
Dual DSP design, achieve the full digital control, less components means high reliability
Wide input voltage range, allows operation in most poor grid conditions
Soft start charging and soft shutdown minimize the impact on the battery.
Input, output have protective circuit breaker switch
Module adopts hot pluggable design, which is convenient for maintenance.
CAN/RS485 interface (Optional)
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
[Specifications] Input: AC100V-240V 50/60Hz. Output: DC12V~2A (1.5A,1A,800mA, 500mA,400mA,200mA,100mA all compatible, can adjust output current depends on your devices input) Max power: 24W (20W/18W/15W/10W/8W/5W all compatible) DC plug size: 5.5mm x 2.1mm Polarity: inner positive+/outer negative- (same as most DC12V devices).
[Safety & Durability] Over voltage/ over current/ short circuit/over loaded/surge protection system loaded, robust design with fireproof shell and superior heat dissipation board, without fan noise, CE/FCC/DoE VI certified safety insurance and energy efficient.
[Compatibility] Except for the common 5.5 x 2.1mm DC plug, this power supply also be customized with other plug tips, support almost all small DC12V devices such as LED Strip Lights, WIFI Router, ADSL Cats, Bluetooth speaker, GPS, webcam, digital piano keyboards, Switches, CCTV Security Cameras and other devices which are powered by DC12V (2A,1.5A,1A,800mA,500mA,400mA,200mA,100mA) power supply.
The 4G Battery Monitoring System BMS110 suitable for Solar Power System, Telecom Tower Battery System, Computer Room Backup Power System real-time monitoring applications. When any battery voltage lower or total voltage lower, will alarm and upload data to cloud platform, SMS notification.
The 4G Battery Monitoring System IoT Gateway BMS110 is special designed for remote monitoring onisite battery groups, it can monitoring upto 4CH 0-15V battery voltages, and total upto 60V voltage, current, temperature, diesel oil level, water leakage, burglarproof, and remote control inverters, equipments, etc.
Model G500
Rated power 500W
Rated capacity(Wh) 519Wh
Standard capacity 3.7V/140400mAh
Overload protection(W) 550 40W
Battery Cell Type 16850
Input AC Charging input Voltage 12-26V
Solar charging Support
Car Charger 14V/8A
Output Output waveform Pure sine wave
AC Output 110V 10%/60HZ
USB Output QC3.0/18W
Type-C PD60W
Cigarret lighter 14V/8A
DC55 2.5 14V/8A
DC55 2.1
Wireless charging Support
Other Functions Bluetooth
LCD Display Support
Music U Disc
LED Lighting Support
PD Quick charging Support
AC output sockets USA, JAPAN, EUROPE, AND AUSTRALIA standard optional
Color orange+black
Working temperature 10-40
Net weight 6.8kg
Gross weight 7.8kg
Dimension: 312 190 190mm
Protections BMS
OEM&ODM. Acceptable
MOQ 1Pieces
warranty 1 YEAR
From storm season to medical needs to the holidays, Duracell is the #1 trusted battery brand so you know it's a battery you can trust. Duracell CopperTop All-Purpose alkaline batteries are not only dependable, they're also long-lasting. You can take comfort in a 10-year guarantee (5-year guarantee for 9V) in storage.
Customized coil size, 95 PCB or PCBA board assembling.Customized magnet pad etc.
Provide us your specific drawing or samples.
Product Advantages
1. Professional engineer
2. Good after-sale service
3. Qualified material and competative price
4. RoHS, SGS, compliant
Application
1.Cell phone charging
2.Beauty meter charging
3.Electric toothbrush
Intelligent desk fast charging
Payment & Shipping
We accept payment via T/T bank transfer.
1.Once confirmed the order, and payment sent after finishing goods. Goods will be sent within 7 days with the fast ,reasonable and efficient shipping mode such like DHL. EMS. UPS. FEDEX. TNT etc.
2. Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility.
3. Please do not bid if you disagree with the shipping and handling charge
Cell Phone Battery Charging Activation Board for Android Phone for Dormant Batteries Activation No Disassembly, battery charging board for phone
Features:
1. Smart Fast Charge IC: Automatic identification for positive and negative current.
2. Fully automatic indicator light: Red: Work indicator; Blue: Full indicator light.
3. Compact and Portable: Convenient and free of disassembly, Unload the battery for charging activation.
4. When the voltage is 4.15V, the blue light will be on automatically. When the battery voltage is 4.1V, the charging will start automatically and the red light will be on.
Functions of the Board:
1. Activation of dormant batteries.
2. Fast and safe battery charging. Current adjustable from 1A~3A.
JCID BT01 battery fast charging board LCD display Type-C PD charger tester, real-time monitoring apple battery voltage health data, realize fast battery charging.
Features:
1. Quickly detect Phone battery, voltage, health data.
2. Type-C interface input, supports PD fast charging.
3. LCD display, real-time monitoring of battery charging data.
4. Simulates the Phone battery charging scheme to truly realize fast battery charging.
