It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
It is a kind of fast acetic curing( based on polysiloxane), anti-fungi silicone sealant, which cures with atmospheric moisture to foam a high strength rubber seal with excellent adhesion to many surface such as glass, glazed surfaces, metals, most plastics, tiles, wood, concrete etc. GORVIA silicone sealant has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
INSTRUCTIONS
l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft,
l Joint width/depth ratio should be 2:1 (Table 1),
l If necessary, use back up material to adjust joint depth,
l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate.
STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C
AS606 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.
Sealing of low movement joints between various construction materials(wood, concrete, brick etc.)
Sealing joints between windows, walls, doors etc.
Filling cracks in walls and on ceilings.
MAIN USE:
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle.
2.For glass steel and plastic accessories (car roof, side body and car front).
3.For metal, plastic, and glass which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force.
CHARACTERISTICS:
1.One component formulation.
2.Modest hardness after curing.
3.Flexible, durable and excellent extruding performance.
4.No need primer to glass.
5.No sagging, no pollution and corrosion to base material and environment.
6.Excellent sealing performance, excellent water and aging resistance.
PACKING:
It is available in 300ml cartridges, and 590ml sausages.
COLORS:
Black & other OEM colors.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture.
