Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
10M/100M media converters and 1000M media converters
Products capability:
According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab
Support long data packet
Easily for setting and debugging
Technology specification:
Wavelength:1310nm and 1550nm
LAN port speed:10M/100M and 1000M
Transimission distance:20km 40km 60km 80km 120km
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter
SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.
Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback
Brief introduction:
The Product provides customer with the most cost-effective solution for transmission with 1 channel uncompressed digital l video and 2 RS485 data over one single fiber cable. It is an easy installation and adjustment free device while providing high quality, real-time video
Features:
Industry-level design, SMT Assembly
Proprietary IC Core
PAL/NTSC/SECAM Compatible
Free From In-field Adjustment
Protection against lightening strike and surge
19' 3U Rack Mount Chassis Option
Application:
Intelligent Transportation System
Public Security Surveillance
Industrial Closed Circuit Television Surveillance
Intelligent Building
Specifications:
Video
Bandwidth: 6.5MHz
Quantization: 10bit
DG: 1%
DP: 0.7íptyp
SNR: 71 dB
Data:
Interface Type: RS-232/485/422, Manchesterú¼Biphase
Operation Mode: Full-duplex/Half-duplex
Data Rate: 0~300Kbps
BER: <10-9
Power supply:
Input AC110---240V
Output DC5V2A
Power 3.8W
Physical dimensions: 13 x 152.8 x 49.5mm
Weight: 120g
Environment:
Operation temperatureú¦-40oC ~ +85oC
Storage temperatureú¦-40oC ~ +85oC
Humidity: 5%--95% Non-Condensing
Transmission rangeú¦
Single-modeú¦ 20/40/60/80/100 Km
Multi-modeú¦ 2Km
10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:
Interface:
Left side:
One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)
Right side:
One rs-232 console port (rj-45 connector)
One power jack
Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:
Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125
Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)
