Ultralfine grinding mill machine pulverizer ,Widely used for ultrafine grinding of dry materials in various industries such as traditional Chinese medicine, western medicine, pesticides, biology, cosmetics, food, feed, chemical industry, ceramics, etc. Especially for fibrous and high toughness materials such as cordyceps, tea, and lingzhi, the crushing effect is more perfect.
Crushing particle size 1-75um ,capacity 70-10000kg/hour.
Welcome cooperate!
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Cutting thickness: 3-300mm
Certificate: CE/ISO9000
Place of Origin: China
Oxy-gasoline Cutting Torch has become an ideal alternative to Oxy-acetylene cutting torch for dismantlement & size-reduction because of following advantages:
1)remarkable saving on fuel cost
using regular gasoline as fuel instead of acetylene which can save fuel cost more than 80%.
the cutting amount of 3L gasoline (about USD2.2)=the cutting amount of 1 cylinder of acetylene (about USD12.5)
2)outstanding safety
no backflash risk, explosion-proof. Inside our gasoline tank, there is military explosion-proof material.
3)much more user-friendly and environmental-friendly: little pollutant
4)strong portability
5)regular gasoline can be available from every Petrol Station.
Table, wire cutting frames size depends on the rectangle or square soap block size
Raw Material Used: Cast Iron, Mild Steel and Stainless Steel if required
Hand Operated
Cuts soap blocks into slabs, slabs in to bars and bars in to cakes in three operation
Gives fine accurate cuts
Simple in operation and effortless cutting
Meant for mass production
Cutting operation performed by wire
Bearing & Double Gearing System for effortless feeding the soap toward the wire cutting frames
Extra wire cutting frames to buy for cutting various dimensions and grams of soaps
The whole Block is cut into Slabs in 1sttable wire frame, then spinning the pusher wheel for the Slabs on the machine table for 2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion
The cut is clean and sharp
For smooth operation the gear arrangement is provided
This range of Soap Cutting Machineries can be availed in single/double/three table based design choice and mechanical/manual controlling mode based specifications. These equipment comprise of standard components like PLC controller, servo drive, servo motor, electrical parts and angle encoder. All the contact accessories of these Soap Cutting Machineries are made of 304 grade stainless steel to maintain required hygiene. Belt conveyor type motor of these equipment requires 0.55 kW power to function. Offered in three phase design, these systems have long working life. Standard of these equipment has been verified on the basis of their service life, production method and user friendliness.
Raw Material Used: Cast Iron, Mild Steel & Stainless Steel
Hand operated
Cuts soap slabs into bars and cakes
Gives fine accurate cuts
Simple in operation and use
Easy to maintain
Cutting operation performed by wire
Bearing & Double Gearing System for hassle free feeding the soap toward the wire cutting frames
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion
The cut is clean and sharp
For smooth operation the gear arrangement is provided
Three Cutting Machine No. E-4 (Mild Steel Contact Parts)
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
Cuts Soap Slabs into Bars and Cakes in Three Operation, Gives Fine Cuts, Simple in Operation and Use.
Meant for Mass Production.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutting Machine is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Double Cutting Machine is used for cutting Soap Slabs into Bars & Bars into Cakes respectively and also used for cutting finished
Bars in to Cakes of any length that may be required.
Machine is very easy in operation and simple to understand.
The whole Block is cut into Slabs by means of Hand Cutter No. F-3 (TEMPLATE) then put the Slabs on the machine table i.e. for
2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size. The mechanism for pushing
the Soap forward is arranged by means of Rack & Pinion. The cut is clean and sharp. Gear arrangement is provided for smooth
operation.
Meant for Mass Production up to 5000 Kg.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
For Cutting Soap Slabs into Bars and Cakes.
Gives Fine Cuts
Simple in Operation and Use.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.
