We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Appearance White granular, good fluidity
Active Oxygen(O) 13.5%
Iron(Fe)(%) 0.0015 %
Moisture 2.0%
Bulk Density g/l 700-1100
PH value
(3%water solution 20) 10~~11
Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.
Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.
Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.
The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs.
It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides. There it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2,4-D (amine), glyphosate and glufosinate herbicides.
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
1. Product Functions and Features
Sodium Selenite is a supplement of selenite for animal nutrition.
The product has stable quality and good liquidity and is easy to mix process.
2. Â Introduction
Mixed feed additives and sodium selenite.
The additive of microelement selenite in feed.
Usage & Dosage:The recommended amount in the compound feed(calculated by Selenite mg/kg)0.1-0.3mg for livestock,0.1-0.3mg for fishes.
3. Appearance
Light Grey Powder
4. Product quality standard
1%selenite 5% Â selenite
Sodium selenite (counted by Se)% 1 ±0.05 5 ±0.10
Moisture % 5
Pass 450 m test sieve% 95
Total arsenic content (counted by As)% 0.0005
Lead content (counted by Pb)% 0.002
Cadmium content (counted by Cd)% 0.001
5.Packing:25kg/bag
6. Storage conditions, methods and precautions:
stored in cool and dry places, and used up as soon as possible once unpacked.
Product Name: Sodium permanganate
Use level: Industrial
Content: 40 (%)
CAS Number: 10101-50-5
Molecular formula:NaMnO4
Molecular Weight: 141.93
Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate.
Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on.
Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place.
Quality Standard: Â
Items index
Sodium permanganate (NaMnO4) Content / (%) 40
Water-insoluble content / (%) 0.01
Potassium (K) content / (%) 0.22
pH value 6 ?8
Density / (g/cm3) 1.36 1.39
Chloride (Cl) content / (%) 0.02
