LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.
Application
This plant is applied to regenerate and purify the used insulation oil such as transformer oil, switch oil, mutual inductor oil and so on. It can remove water, gas, particle, free carbon, deep oxides and so on. Also it can recover the oil color. After purification, the used insulating oil can reach international standard and recover its original function.
Features:
1. Besides the common vacuum oil purifierí»s function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility.
2. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so dose the regeneration oil system, and also they can work at the same time.
3. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration.
Advantages:
It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, ph value. Meanwhile, it improves the voltage-withstand value through filtering the polarity materials like free carbon, deep oxides and so on.
TYA Series Lubricant Oil Purifier are mainly designed to handle the water infiltration, emulsification and particle pollution of various industrial oil such as gear oil,compressor oil , cooler oil,mechanical oil, hydraulic oil, caused in the process of their production, transportation and usage.
It is solely designed for lubricating oil is made according to nature of high impurity of gear lubricating oil including hydraulic oil and mechanical oil, which has features of short time for treatment and high efficiency, enabling fast removal of oil's water, gas, impurity and volatiles such as alcohol, gasoline and ammonia gas. Hence the quality of oil is improved, viscosity of lubricating oil, flash point and other performances are recovered which ensures a correct running of hydraulic system, power system and lubricating system.
Feature:
1) Perfect capacity of removing impurities. The special filters made of special materials which can effectively and rapidly eliminate various impurities, water and gas.
2) Automatic reverses flushing ability, which automatically cleans the mass impurities withheld by the purifier.
3) Advanced medium heating absorption and condensation system
4) Pressure protection, auto heating temperature control, and device of auto separation of condensate water, easy to handle, safe and reliable.
5) Top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime.
6) Unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil.
7) Imported parts are used for all electric system, which ensures operation of the equipment with high performance
The TYA series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is applied to recover and purify various high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil, industrial oil, car lubricating oil, Motor oil and so on. This machine suit for many lines, such as the mine, metallurgy, industry, electric power, transportation, manufactures and so on.
Series TY vacuum turbine oil purifier mainly be used for purifying unqualified turbine oil, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil. So that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely.
This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clear transparent. Series TY is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.
Features:
1. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles
2. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
3. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technology.
4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
5. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.
6. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
7. Work online with stream turbine, hydraulic turbine.
Turbine Oil Purifier Available Style
1. Fixing type,mobile type with four wheels and mobile type with trailer.
2. Normal appearance type,shelf-covering type and explosion-proof type.
3. Avaliable in different color.
Technical Parameters:
Index Name Unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 TY-300
Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000
Working vacuum MPa -0.06~-0.095
Working pressure MPa 0.4
Temperature range 20 ~80
Power supply 380V 50HZ 3Ph (As per users option)
Crude Oil:
Bonny Light
REBCO
ESPO (Siberia Pacific Oil)
Basra Light
WTI
Southern Green Cayon Blend
Olmeca Mexican crude
Heavy Crude, etc.
Product Description :
Crude oil is a mixture of hydrocarbons that formed from plants and animals that lived millions of years ago. Crude oil is a fossil fuel, and it exists in liquid form in underground pools or reservoirs, in tiny spaces within sedimentary rocks, and near the surface in tar (or oil) sands
Price of product ( USD price or FOB price) : Price on request
Product origin : Worldwide
Key Specifications/Special Features :
Specifications for types/grades of crude (special grade needed by buyer)
will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
Sion-NSH-TF is a filtration and dehydration unit with thermal and vacuum processing. It is ideal for filtration and dehydration of turbine oil. This units can extend turbine oil life by removing contaminates from oil, such as water, gas and particulates, improve the oil properties.
Sion-NSH-TF combines vacuum dehydration technology and coalescence technology, can effectively remove both emulsified and dissolved water from turbine oil. Fitted with specially made emulsifying device, it is capable of making turbid emulsified oil very clear. Multi-stage precision filters minimizes impurities and ensures oil cleanliness, which can reach or better than NAS 6 Grade.
TF series is particularly suitable for purifying turbine lubricating oil. It also apply to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
1.Application
LV series oil purifier are specially suitable for purifying and restoring hydraulic oil, machine oil,coolant oil and various other lubrication oil. Most of breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water,gas,impurities etc.LV series can rapidly remove water,gas,particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
2.Features
1.Perfect capacity of removing impurities.The special filters made by NSH are made of special materials which can eliminate various impurities,water and gas effectively and rapidly.
2.Automatic reverse wash system will extend the lifetime of filters and improve the performance of the filters.
3.High performance of security system including pressure protection device and automatic temperature controller makes purifier operate safely.
4.Online work
5.Easy handling and maintance.
6.Lower maintance and replacement expenses.
7.small size ,light weight,low noise.
8.Various sizes and configurations(alloy shield)available.
TF series is particularly suitable for purifying turbine lubricant oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large amount of water and others such as vapor, impurities, sludge, dielectric and colloid.
TF series will result in the improvement of the properties of turbine oil or other lubrication and extend the maintenance period of turbines or other equipments which have lubrication system and keep them operate in good condition.
Technical Specification
ItemUnitTF-10TF-20TF-30TF-50TF-100TF-150TF-200
Flow RateL/H6001200180030006000900012000
Vacuum RangeMpa-0.06 ~ -0.096
Working PressureMpa= 0.3
ClearnessNAS= 6
Temperature Range°C40 ~ 80
Water ContentPPM= 100
Impurity Sizeµ m= 5
Demulsification NumberMin
