The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
Three heads:
1.1064nm head for black, blue, brown tattoo;
2.532nm head for red, orange, pink and colorful tattoo;
3.1320nm Carbon peeling head optional for Skin rejuvenation, whitening, tighten pores, acne removal etc.
This system is IPL(intense pulse light) +RF(Radio Frequency), which is the best technology in the market. For this system, you can use IPL only or RF only, or IPL+RF together.
System Characteristic:
1.handle cooling system: User may adjust the cooling system to improve the treatment result affected by the constant cooling temperature.
2.the handpiece has fast plug in-out. Water and electricity body cut, automatic diagnosis system insetted. Easy and fast to use.
3.built-in expert system: join the clinical experience we accumulated for several years into the expert system to make sure the system is safe and simple to use.
4.you can upgrade this system through computer.
5.customer design
Certification Received: CE Mark
Treatment range
Almost all the skin problem, such as speck, age spot, pigmentation, wrinkle removal, skin rejuvenation, hair removal, sunburn, rough pores and acne removal.
Special features
1. Effective shallower hair removal
2. Independent of skin types
3. A more effective technique for skin rejuvenation as the technology allows for sufficient thermal damage of the target area without overheating surrounding tissue structures.
Treatment theory
The objective of effective permanent hair reduction and skin rejuvenation is to heat up and injure the target, be it a hair follicle or a vascular or pigmented lesion.
The job of the intense pulsed light is to heat up the target to the required temperature and thereby lowering the impedance of the target.
The RF current then travels along the path of least impedance (preheated path of the intense light) and gently heats up everything in its pathway. This results in further injury to the target and completes the heating (injury) that is necessary for the desired biologic effect, for example to stop hair growing, or for vascular and pigmented lesions to fade. RF f½s effect is pertaining to the electric density which depends on the impedance. And it is not absorbed by melanin and thus independent of skin types. So it is an optimum resolution for the patient of darker skin or of the shallower hair.
Specifications:
Light source: intense pulse light
IPL Energy Out: 0-40J/cm2
IPL Pulse Repetition Rate 0.5Hz
RF Energy Out: 0-100J/cm3
Dimensions: 460mmf-500mmf-900mm
Weight: 65kg, portable is 38kg around
Input Voltage: 230Vf+, 50Hz
Operating Panel: 8.4f+f+ TFT Color touch Screen
Cooling: 0-5 centigrade
Handpieces: SR, HR, VR, AR
System Characteristic:
1.handle cooling system: User may adjust the cooling system to improve the treatment result affected by the constant cooling temperature.
2.the handpiece has fast plug in-out. Water and electricity body cut, automatic diagnosis system insetted. Easy and fast to use.
3.built-in expert system: join the clinical experience we accumulated for several years into the expert system to make sure the system is safe and simple to use.
4.you can upgrade this system through computer.
5.customer design
Certification Received: CE Mark
Treatment range
Almost all the skin problem, such as speck, age spot, pigmentation, wrinkle removal, skin rejuvenation, hair removal, sunburn, rough pores and acne removal.
Special features
1. Effective shallower hair removal
2. Independent of skin types
3. A more effective technique for skin rejuvenation as the technology allows for sufficient thermal damage of the target area without overheating surrounding tissue structures.
Treatment theory
The objective of effective permanent hair reduction and skin rejuvenation is to heat up and injure the target, be it a hair follicle or a vascular or pigmented lesion.
The job of the intense pulsed light is to heat up the target to the required temperature and thereby lowering the impedance of the target.
The RF current then travels along the path of least impedance (preheated path of the intense light) and gently heats up everything in its pathway. This results in further injury to the target and completes the heating (injury) that is necessary for the desired biologic effect, for example to stop hair growing, or for vascular and pigmented lesions to fade. RF is effect is pertaining to the electric density which depends on the impedance. And it is not absorbed by melanin and thus independent of skin types. So it is an optimum resolution for the patient of darker skin or of the shallower hair.
Specifications:
Light source: intense pulse light
IPL Energy Out: 0-35J/cm2
IPL Pulse Repetition Rate 0.5Hz
RF Energy Out: 0-100J/cm3
Weight: 8kg around
Input Voltage: 230Vf+, 50Hz
Operating Panel:TFT Color touch Screen
Cooling: 0-5 centigrade
Handpieces: SR, HR, VR, AR
Technical parameters
(the working area and laser power can be customized according to requirement)
Model of machine HLM-SD-50
Laser tubeSemi-conductor mould
Cutting area110mm 110mm /300mm 300mm(optional)
Laser power 50w
Marking speed0-7000mm/s
Operating voltage Ac220 10%, 50hz
Location precision 0.003mm
Working environmentTemperature: 0-40 centidegree, humidity: 45%-85%
Marking depth 0-0.3mm
Min. Line width 0.02mm
Min. Character 0.2mm
Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc.
Working tableLift platform up to 1, 000mm from the bottom to the top
Auxiliary deviceExhaust fan and cooling system
Laser wavelength1064nm.
1.Introduction
The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface.
2. Features
Friendly and ergonomical man-machine interface
Stable, precise and high-speed system
File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features
Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers
Auto cooling
Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional)
3. Technical Parameters
Wavelength 1064 nm
Pump source Kr lamp
Laser cavity Ceramic
Laser output stability í_ í+ 3%
Beam expanded angle í_ 8 mrad
Aiming laser Red
Linear speed Adjustable, max 5000 mm/ s
Line width Min 0.1mm
Letter size Min 0.5mm
Marking area F=160 mm 70 mm í- 70 mm
F=220 mm 100 mm í- 100 mm
F=250 mm 150 mm í-150 mm
Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 7kW
Dimension 1500 mm x 500 mm x 1200 mm
Net weight ~180 kg
Cooling Mode Water cooling
4.Standard Configuration
Laser machine í- 1 set
PC í- 1 set
Marking software (In English) í- 1 set
Operation manual (In English) í- 1
