3D radar level sensor accurately captures three-dimensional imaging, level, mass, volume, and capacity of materials in heavily dusty environments, such as coal mining. It effectively provides real-time information to prevent material loss. With ATEX and IECEX certifications, it offers efficient solutions for silo management and various chemical industries.
3D radar level sensor accurately captures three-dimensional imaging, level, mass, volume, and capacity of materials in heavily dusty environments, such as coal mining. It effectively provides real-time information to prevent material loss. With ATEX and IECEX certifications, it offers efficient solutions for silo management and various chemical industries.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT
DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life.
SPECIFICATIONS
1. Appearance: Off white Granules
2. Solubility: Soluble at 800C
3. Viscosity of 4% solution: 10 to 30 cPs
(Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc)
4. Ash content (w/w) : Max 3%
5. Bulk density (gm/ml) : 0.65 to 0.85
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually sprinkle SizeMagikTM-LP4.
3. Add the required quantity of softener.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
ECONIMICAL ADVANTAGES
Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
PREGEL STARCH is a fine white powder. It provides product with viscosity without the need for cooking on high temperatures, which means that the food manufacturer does not need to precook the starch. Pre-gelatinized starches retain most of the functional properties and viscosity of the original base material.
Features:
High Paste formation in cold water
Water holding capacity is high at low temperature
High Pasting property
Viscosity is stable
Excellent thickening characteristics
Excellent solution stability with high flow and spread properties
Application:
Baking Industry
Beverages, meats and dairy products
Confectioneries for gelling, thickening, texture stabilizing
Foam strengthening and crystal growth control in food products
For adhesion, film foaming and glazing
TECHNICAL DATASHEET
EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 7% solution - 5 to 7
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in a cooker
2. Gradually add EcoTexTM-SL55 and min for 2 min.
3. Close the pressure cooker lid.
4. Open the steam value and cook to @ 120�? �ºC or 35psi.
5. Retain in the cooker for 15 to 20 minutes.
6. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 25Kg net weight PP bags with moisture-proof liner inside
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 5% solution - 6 to 8
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually add EcoTexTM-SL20 and mix for 2 min.
3. Add other ingredients and mix for 2 min.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�? �ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
Industrial Salt
HS Code: 250100
PURITY: > 99.4% - 99.7%
Industrial Salt Applications:
Many of salt's 14,000 uses are found where you'd least expect salt. Salt sets the dye in fabric and is used to produce glass, polyester, plastics, and leather as well as in the chemical industry. Salt assists in cleaning gas and oil wells and is an essential component in the manufacture of paper, tires, brass, bleach, and case-hardened steel. Salt is part of the caustic soda and chloralkali processes. Industrial salts are often purchased in bulk and in various levels of purity depending on the application.
