We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Iron ore is the main raw material that is used in the manufacturing of steel. 98% of the mined iron ore goes in the steel production. India has rich deposits of Iron Ore and is among the top 10 exporter of iron ore in the world.
Iron ore is a mineral substance which, when heated in the presence of a reductant, will yield metallic iron (Fe). It almost always consists of iron oxides, the primary forms of which are magnetite (Fe3O4) and hematite (Fe2O3). Iron ore is the source of primary iron for the world's iron and steel industries.
It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Our monthly ability to export Iron Ore is of 2000-5000MT per month.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
Variable
FeO 16.28 %
Hierro Total 64.02 %
SiO2 4.03 %
AhO3 0.24%
s 0.07%
p 0.04 %
CaO 1.34 %
MnO 0.00%,
PbO 0.00 %
MgO 0.00 %
ZnO 0.00%,
TiO2 0.00%
As 0.00 %
Cu 0.02 %
K2O 0.00%
Origin Mexico
Minimum monthly shipment 100,000MT CFR terms only
(Maximum quantity of 200,000MT per month is possible) Annual contract only
The price shall be quoted against firm inquiry.
Payment: 90% by DLC / MT700 Nontransferrable and confirmed and payable at sight (Loading port) after SGS for quality and quantity.
Balance 10% shall be against discharge port inspection at the discharge port in China
Sellers performed shipments in the past ( during 2019 prior Covid period ).
This offer is valid for a limited period and the response to queries shall be only through email so long as inquiries are received with KYC of the buyer/end user.
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of magnetite (Fe3O4, 72.4% Fe), hematite (Fe2O3, 69.9% Fe), goethite (FeO(OH), 62.9% Fe), limonite (FeO(OH)n(H2O), 55% Fe) or siderite (FeCO3, 48.2% Fe).
Ores containing very high quantities of hematite or magnetite (greater than about 60% iron) are known as natural ore or direct shipping ore, meaning they can be fed directly into iron-making blast furnaces. Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel.
Item Specification
Fe: 57 Min
SiO2: 4 Max
Al2O3: 5.5 Max
Moist: 12 Max
P: 0.08 Max
S: 0.04 Max
+40mm: 5 Max
-6mm: 20 Max
LOI: 7 About
TI: 70 Min
AI: 15 Max
RI: 60 Min
RDI: 25 Max
DI: 10 Max
Iron ore is the main source of primary iron required for the global iron and steel industries. It is essential to produce steel, which helps to create and maintain a strong industrial base. fe 62 and other percentages.
Iron ore mining methods vary by the type of ore being mined. There are four main types of iron ore deposits worked currently, depending on the mineralogy and geology of the ore deposits. These are magnetite, titanomagnetite, massive hematite and pisolitic ironstone deposits. Origin :- Mexico , Brazil, South Africa.
Iron ore with Fe2O3 content 70%. Fe2O3 - 70,03%, SiO2 - 22,08%, Al2O3 - 3,25%, P - 0,099%, FeO - 1,10%, CaO - 0,29%, MgO - 0,47%, TiO2 - 0,101%, MnO - 0,034%, S - 0,03%, Humidity - up to 5,00%. Iron ore with Fe2O3 content 60%. Fe2O3 - 60,29%, SiO2 - 35,54%, Al2O3 - 1,03%, P - 0,042%, FeO - 1,09%, CaO - 0,17%, MgO - 0,34%, TiO2 - 0,036%, MnO - 0,051%, S - 0,081%, Humidity - up to 5,00%
