Xiamen Timely Stone Co., Ltd

Timely stone manufactures and exports various granite and marble slabs.

Features:
1) standard dimension:
60~90cm up x free length;
120~150cm up x 240-280cm up;
Other sizes are available upon requests
2) popular thickness: 2cm, 3cm and 4cm
3) surface finish: polished, honed, flamed, sawn, bush hammered (fine picked), chiseled, sandblasted, antique, etc.
4) common packing: slabs are well packed by wooden shelf with polished face to face.
5) quality control: polished degree: above 85 degree
Thickness tolerance: +/-1mm for 2cm slab.

If you are interested in our product, please feel free to contact us.


Standard sea worthing package

Granite and marble tiles

Features:
1) finish: polished/ honed/ flamed/ bush-hammered/ mushroom/ sandblast/ natural split/ rough picked.
2) size: 30x30cm, 30x60cm, 40x40cm, 45x45cm, 60x60cm, 60x90cm, etc.
Thickness: 1cm, 1.2cm, 1.5cm, 2cm, 3cm, or as per customer specified.
3) thickness tolerance: +/-1mm
4) polishing degree: above 90 degree


Packing: thin tiles (1cm) are packed in styrofoam boxes and are further packed into wooden crate. Thick tiles (1.2cm up) will be packed in strong wooden crates directly.

Tiles

Features:
1) finish: polished/ honed/ flamed/ bush-hammered/ mushroom/ sandblast/ natural split/ rough picked.
2) size: 30x30cm, 30x60cm, 40x40cm, 45x45cm, 60x60cm, 60x90cm, etc.
Thickness: 1cm, 1.2cm, 1.5cm, 2cm, 3cm, or as per customer specified.
3) thickness tolerance: +/-1mm
4) polishing degree: above 90 degree


Packing: thin tiles (1cm) are packed in styrofoam boxes and are further packed into wooden crate. Thick tiles (1.2cm up) will be packed in strong wooden crates directly.

Granite and marlbe tiles

We provide various Chinese and imported marble/granite tiles for your selection.
The granite and marble tiles can be used effectively on all kinds of projects

Features:
1) Finish: Polished/ honed/ flamed/ bush-hammered/ mushroom/ sandblast/ natural split/ rough picked.
2) Size: 30x30cm, 30x60cm, 40x40cm, 45x45cm, 60x60cm, 60x90cm, etc.
Thickness: 1cm, 1.2cm, 1.5cm, 2cm, 3cm, or as per customer specified.
3) Thickness tolerance: +/-1mm
4) Polishing degree: above 90 degree
5) Packing: Thin Tiles (1cm) are packed in Styrofoam boxes and are further packed into wooden crate. Thick tiles (1.2cm up) will be packed in strong wooden crates directly.
Kindly contact us your specified enquiry if you are interested in our products or need more information.

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.

Absolute Black, Black Galaxy, Black Pearl, Black Forest, Impala Black, Titanium Black
Steel Grey, Mudgal Grey, Sadarali Grey, Sira Grey
Tan Brown, Coffee Brown, Cats Eye, Colombo Juprana, Colonial Gold, Ghiblee Gold, Golden Fantasy, Adoni Brown, Bash Praadiso
Chida White, Moon White, Amba White, River White, Alaska White, China White
Himalayan Blue, Indian Juprana, Indian Mahgoany, Ivory Fantasy, Ivory Gold, Ivory Pearl, Lady Dream, Lavender Blue, Madurai Gold, Pradiso, Red Multi, Ruby Red, Sapphire Blue, Sapphire Brown, Shivakasi Gold
ALASKA GOLD, BALCK MARQUINO, Black Wave, Chima Pink, Coin Black, Copper Silk, Crystal Blue, Crystal Yellow, Desert Brown, Fish Black, Golden Pearl, Ice Blue, J White, Jhansi Red, Kota Kasta, Lakha Red, Rajasthan Black S White, Nosra Green, P White, Platinum White

Black Absoluto Headstone

Double Heart Headstone made of Vizag Blue Granite / Bahama Blue Granite