NEO ENAMEL Paints are based on the alkyds/drying oils which have hard films with gloss retention. The films show excellent brushing properties and very little tendency to yellowing on exposure to the environment. Products are carefully designed keeping the pigment volume concentration to get optimum gloss, washability, adhesion and durability. The product dries at room temperature by oxidation and polymerization. NeoSyntheic Enamels are used on various substrates like wood , metal furnitures, train coaches, automobiles industries etc. NEO ENAMEL products are available in 2 varieties :
I GLOW Hi Gloss Enamel.
X 2 General Purpose Enamel.
Enamel Top Coat
Ritver E name l Top Coat Fast Dry is based on a drying oil Alkyd resin, containing Titanium dioxide. It is a fast drying product Topcoat enamel which is very versatile and can withstand wide range of temperatures. It has good adhesion and exhibits good gloss after drying.
GOOD FORM IRON-STEEL- GATES-IRON/METAL STRUCTURES-INTERIOR/EXTERIOR
We are paint manufacturar in Pakistan specialist in High Gloss Enamel paint we have low prices and high quality product . Send me you contact we will discuss in details .
DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.
USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces
BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable
PACK SIZE 1 litre, 5 litres
COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart
PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint
PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion
PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.
RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT
PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.
PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit