Features and Benefits
The double eccentric design offers an optimal sealing performance.
Smart stainless steel seat, very low torque - easy to be operated.
The EPDM rubber ring was fixed on the edge of the disc by the retainer ring, easy to be replaced.
Eccentric pin connect the disc and stem, not destroy the structure of the stem, make sure the safety and strength.
Applicable Standard
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: EN558-1 basic series 13 Top flange standard: ISO5211/1
Technical Data
Nominal Diameter: DN300~DN2400(12"~96") PN10 DN300~DN900(12"~36") PN16
Temperature range: -5 C ~ +85 C
Sealing test: 1.1PN
Shell test: 1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
T2SX Series Temperature Control Valve Electrothermal Type PN16
Features and Benefits
Push fit connection between the valve and actuator, quick for assembly and disassembly
Electrothermal actuator, running silent.
Zero leakage when pressure difference below 350KPa.
Fist time running, fully open.
Actuators made in Germany.
Used in FCU system
Applicable Standards
Connection standard: ISO228
Technical Data
Nominal Diameter:DN20/25(3/4"/1") Nominal pressure: PN 16 Temperature range: --5~85C Voltage: AC220V±10%, 50/60Hz Power: 1.8W
Thrust: 100N
Stroke: 4mm
Open close cycle: About 3 minutes Connection dimension: M30 1.5mm Temperature: 0C~60C
Wire length: 1.2m
Wire standard: 2 -0.75mm2PVC
TBSX Series Temperature Control Valve Dynamic Balance Type PN16
Features and Benefits
Two function in one: control + constant flow rate.
Push fit connection between the valve and actuator, quick for assembly and disassembly.
Electrothermal actuator, running silent.
Flow rate not affected by pressure changed.
Fist time running, fully open.
Actuators made in Germany.
Used in FCU system
Applicable Standards
Threaded Standard: ISO 228
Technical Data
Nominal Diameter:DN20/25(3/4"/1")
Nominal pressure: PN16 Temperature range: -5~85C
Voltage: AC220V±10%,50/60Hz
Flow rate tolerance: ±5%
Suitable for: Water
Voltage: AC220V�±10%,50/60Hz
Power: 1.8W
Thrust: 100N
Route: 4mm
Open close cycle: 3 minutes
Connection dimension: M30 1.5mm
Temperature: 0 C~60 C
Wire length: 1.2m
Wire standard: 2 0.75mm2PVC
Features and Benefits
Wider EPDM seat design, replaceable, its suit for different type of flanges.
ISO5211 standard top flange, suit for different operations.
Eccentric pin on the stem, not destroy structure of the stem, make sure the safety and strongth.
Lever operation BWLX: DN50~DN150.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter:DN50~DN150(2"~6") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat
Streamlined SS304 disc, corrosion resistant
ISO5211 standard top flange, suit for different
operations.
Both gear and lever operated are available.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN150 (2"~6") Nominal pressure: PN16
Working temperature: -5C ~ +85 C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat
Streamlined SS304 disc, corrosion resistant
ISO5211 standard top flange, suit for different
operations.
Both gear and lever operated are available.
Electrostatically applied Akzo Nobel epoxy
powder internally and externally.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16
Working temperature: -5 C ~ +85 C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits
Vulcanized EPDM seat.
Streamlined DI+EPOXY disc, corrosionresistant.
ISO5211 standard top flange, suit for differentoperations.
Electrostatically applied Akzo Nobel epoxypowder internally and externally.
Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598
Technical Data
Nominal diameter: DN200~DN600(8"~24") Nominal pressure: PN16
Working temperature: -5 C ~ +85 C
Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.
RVRX OS&Y Gate Valve PN16 Flanged Resilient Seated EN1171 Type
Features and Benefits
3 O-ring sealing, zero leakage, safe and reliable.
Fully vulcanized wedge, corrosion resistant.
Wedge with plastic guide rail on two sides, reduces friction, reduces torque.
Full bore, resilient seated, no water head lost.
Electrostatically applied Akzo Nobel epoxy powder internally and externally.
Applicable Standards
Design standard: BS EN 1171
Flanges standard: BS EN 1092-2
Face to face standard: BS EN 558-1 base series 3 Pressure test standard: BS EN12266-2003
Technical Data
Nominal Diameter:DN50~DN300(2"~12") Nominal pressure: PN 16
Temperature range: -5C ~ +85C
Suitable for: Water, ethylene glycol, non correction medium, etc.
TTSE Series PN25 ON/OFF Type TTSX Series PN25 Regulating Type Temperature Control Valve
Features and Benefits
Ball valve body, quarter turn.
Screw connection between the valve and actuator.
A.C. synchronous motor, two line type, easy for installation.
Zero leakage when pressure difference 600KPa.
0(2)-10 V or 0(4)-20mA input signal.
Used in AHU system
Applicable Standards
Connection Standard: ISO228
Technical Data
Nominal Diameter:DN25~DN50 (1-2)
Nominal pressure: PN 25
Temperature range: -5~85C
Suitable for: Water and neutral liquid
Voltage: ON/OFF: AC220V 50/60Hz
Regulating: AC 24V 50/60Hz
Power Consumption: ON/OFF: 5VA Regulating: 4VA
Control Signal: ON/OFF: On Off signal Regulating: 0(2)-10V, 0(4)-20mA
Regulating return signal: 0-10V
Running time: DN15~25 45 seconds
DN32~50 60 seconds
Wire connection spec: 0.5~1mm2
Level of protection: IP54
