Alkaline Water Machine with self cleaning built in and maintenance free, only replaced the filter after 3,500 liters or less depends on the quality of water its has to be filtered. These machines are high quality with free to install and operate them.
We manufacture water chilling plants with nominal cooling capacity for Plastic products Industries. The system of water chilling plant is to deliver chilled water to the end user.
Features:-
Emerson climate Technologies/Danfoss make compressor.
Available Hermetic Compressor or scroll Compressor.
Air cooled type condenser with Axial Fan.
Shell and tube or Copper pipe type cooling Unit
Schneider make Electrical components.
Digital temperature Controller.
Stainless steel with Insulation water Tank.(Available- 2TR, 3TR, 5TR, 10TR)
Inbuilt water Chilling pump.
1.Direct connection technology between air conveyor and in-feeding starwheel is applied to replace in-feeding screw and conveying chain to ease bottle changing process with only to change few parts. Newly-designed bottle-separating grippers are assembled to starwheel.
2.Neck-hanging technologyis applied in bottle transportation. Instead of traditional starwheel, we use neck-hanging gripper to make bottle-size-changing easily , without equipment height adjustment ,only few parts need to be adjusted
3.Specially-designed rinser grippers which are made of stainless steel are firm and endurable, with no contact to screw part of the bottle to prevent second pollution.
4. splint of starwheel using twist descending way to simplify the process of bottle-size-changing. Only need to change arch board and starwheel ,within ten minutes.
Model YFCY12-12-4
Capacity(B/H) 3000-4000
Bottle size Neck:ö50-100mm Height:150-320mm
Water pressure 0.18-0.25Mpa
Water consumption(kg/h) 2000
Washing station 5
Dripping station 3
Filling precision +5MM
Air pressure 0.4Mpa
Air consumption 0.4m³/min
Power(kw) 3.5
Weight(kg) 2000
Dimension(L*W*H) 2100*1600* 2100 mm.
Item: ANGEL RO-100B with automatic washing bottle function
First washing bottle and then filling water
Capacity: 400, 600, 800 and 1, 300 gallon per 24 hours
Source water: City water
Power: 220, 260, 300 and 510W
Rated current: 1, 1.2, 1.4 and 2A
RO membrane from USA has the 99% desalination:
UV: 16W
Ozone content: 1, 000mg
Recycle ration: 45 to 50
Filling flux: 8 liter/minute
Dimensions: 1, 950 x 720 x 1, 300mm
Use for 5 gallon bottle or smaller bottle It can be used in community, school and factory
Characteristics:
Luxury stainless steel waterproof frame, front door-open design, safe and sanitation, durable, easily install and maintain
Advanced RO technology, adopts nine steps to treat water to ensure the output water quality
Intelligent technology and IC card induction selling control technology to ensure the charge precision is up to dollar 0.01
Fully seal filling type + high-concentration ozone sterilization type to avoid second pollution
24 hours continues to kill germs by UV to ensure more best quality of the water
Lamp-checked technology available, users can check any impurities in the water directly
The light of the lighting marquee and filling compartment can be controlled by light to save power
Adopt sands filter (30kg) and active carbon filter (25kg)to be the first treatment, which can be backwashed to reduce the use cost
This machine consists of a pair of rollers with diamond groove, rack and transmission system. By the relative movement of the front&back rollers, the machine presses and flatten the raw material, dewatering the rubber and removing the impurities. Due to different speeds between the two rollers, the raw material is pressed to crepe sheet with honeycomb surface. The machine is very easy to operate and is with the features of compact structure, high efficiency, low noise and low power consumption etc.