Tech Sukratu

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

1. SPECIFICATION:

1) Grade: AISI 304/SUS 304 / S30400 / 1.4301

2) Shape: Coil / Roll / Strip

3) Treatment: Hot Rolled and Cold Rolled

4) Surface: No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection)

5) Thickness Range:

0.3 - 3mm ( Cold Rolled Process )

3 - 12mm or more (Hot Rolled Process)

6) Edge: Slit edge & Mill edge

7) Width Range: 10 - 2000mm

8) Length Range: Coil or as your request

9) Standard Size:

1000mm x coil mm

1500mm x coil mm

4' ----------1220mm x coil mm

5' ----------1524mm x coil mm

Above is our normal size of 304 and 304L stainless steel coil, but are capable of shearing or custom leveling to your required lengths and widths.

10) Available Standard:

ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc.

In general, ASTM A240/A240M or as your requirements

11) Certification: MTC and SGS and Any third party inspection

12) Package: Standard Export Sea-Package (Waterproof Kraft Paper + Bundle with steel strip)

13) Brand: TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc.( main mills)

14) Containers:

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)

40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

20' container load 25tons goods whose length is under 5.8m

40' container load 25tons goods whose length is under11.8m

2. TYPICAL APPLICATIONS:
Chemical equipment and piping, heat exchanger components, dairy and food handling equipment and utensils, cryogenic vessels and components, architectural and structural applications exposed to non-marine atmospheres

3. CHEMICAL COMPOSITION:
Element Carbon Manganese Sulfur Phosphorus Silicon Chromium Nickel Nitrogen
Type 304 0.07% 2% 0.03% 0.45% 0.75% 17.5-19.5% 8-10.5% 0.1%
ElementCarbonManganeseSulfurPhosphorusSiliconChromiumNickelNitrogenType 304.L 0.03% 2% 0.03%0.45% 0.75%18.0-20.0%8.0-12.0% 0.1%
4. MECHANICAL PROPERTIES:

Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation(2�³ Gauge length) Hardness Rockwell
304 Ann 30 min. 75 min. 40% min. HRB 92 max.
304 Hard 75 min. 125 min. 12% min. 25 -32 HRC (typical)
304 Hard 110 min. 150 min. 7% min. 32 -37 HRC (typical)
304 Hard 25 min. 70 min. 40% min. HRB 92 max.
304L Hard 75 min. 125 min. 12% min. 25-32 HRC (typical)
304L Hard 110min 150 min 6% min 32 -37 HRC (typical)

5. PROCESSING:
Types 304 and 304L cannot be hardened by thermal treatment. Annealing: Heat to 1850o F to 2050 o F and cool at sufficiently high rates through 1500oF to 800oF to avoid precipitation of chromium carbides. Stress Relief Annealing: Cold worked parts should be stress relieved at 750oF for ½ to 2 hours.

65Mn CK67 high carbon cold rolled spring steel strip
Hardened and Tempered Steel Strip
Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties
Standard AISI, ASTM, BS, DIN, GB, JIS
Place of Origin China
Material Hot Rolled
Surface Polished
Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade
Brand Name HENSON
Width 2.0mm-300.0mm
Length Customize
Tolerance +/-10%
Hardness 40-55HRC
Surface nature, blue, yellow, white, polish
Edge Slit,Round,Square
MOQ 1000KGS
Tolerance thickness+/-0.01mm max,width +/-0.05mm max
Type strip,coil,sheet
Coil ID 300-500 mm
Tensile Strength 540-1575N/mm2
Yield Strength 370-1475N/mm2

Product Details
UsageApplication Industrial
Type Lap Joint Flanges
Size 15 inch 01 inch 2030 inch 510 inch 1020 inch
Material Standard ASTM A182 ANSI B165 ASTM A351 ASTM A105
Rated Pressure Bar 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India

Minimum Order Quantity 1 Piece
Rated Pressure Bar 150 300 400 600 900 1500 2500

We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK IranTehran Saudi Arabia Spain Bahrain Nigeria Dubai Egypt Malaysia etc Various steel products such as Angles Channels Beams Billets Blooms Round Bars Square Bars Rectangular Bars Flat Bars Forged Bars Rolled Bars Concast Bars Pipe Fittings Elbow Tee Reducer Cross Stub End End Caps Forged Stampings Pipes Tube Tubing Fasteners Bolts Nuts Washers Screws Studs Plates Sheets Coil etc

Flange Standards API 6A ANSI ASME DIN EN10921 UNI JISKS BS4504 GB AWWA C207 GOST PSI
Specifications Can offer Lap Joint Flanges as cast forged normalized annealed quenched hardened tempered condition with black or bright proof machined finish

Various type of IBR approved Flanges that can be procured are as follows Blind SlpOn Welding Neck Weldneck Long Welding Neck LWN Socket Weld Lap Joint Threaded Spectacle Blind Plate Collar Flat Face Raised Face Ring Type Joint etc

Size range of flanges that can be offered are inch upto 60 inch depending on type class grade of flanges

Class of flanges 150 300 400 600 900 1500 2500

IBR approved Flanges can be avail in various grade materials as mention below

Carbon Steel ASTM A350 LF2 ASTM A105N 224Gr490 A737GrB K03011 10566 TStE355 A510FP1 FeE3553 K03504 10460 P250GH C228

Stainless Steel SS 304 304L 309 310 316 316L 316Ti 317 317L 321 329 347

Duplex Steel DSS 2205 ASTM A182 F60 F51 UNS S32205 S31803 14462 X2CrNiMoN2253 AFNOR Z3CND2205Az

Super Duplex Steel SDSS 2507 Zeron 100 ASTM A182 F53 F55 UNS S32750 S32760 DIN 14410 14501

Inconel Alloy 600 601 625 690 718 N06600 N06601 N06625 N06690 N07718 AFNOR NC 15Fe NC19FeNb 24816 24851 24856 24668

Incoloy Alloy 800 800H 800HT 825 UNS N08800 N08825 AFNOR 25NC3520 WFe32C20DU 14876 24858

Monel Alloy 400 K500 24360 24375

Hastelloy Alloy C276 C22 UNS N10276 N06022

CopperCupro Nickel CUNI 9010 CUNI 7030

Titanium Alloy Grade 2 5

Product information

Stainless Steel 310,310S Sheets can be welded using most of the resistance and fusion methods.Stainless Steel 310,310S Plates also possesses good low temperature toughness and is non-magnetic in the annealed condition. In addition to its heat resistance properties, Stainless Steel 310,310S also enjoys better resistance against creep and stress rupture corrosions. Stainless Steel 310,310S Sheets is used in Oil Refineries, Fluid catalytic cracking units, Hanger rods, and more. Like most other austenitic alloys, Stainless Steel 310,310S Plates work hardens and may require annealing after severe forming. Niobium in Stainless Steel 321H Coils has been added to suppress grain boundary Chromium Carbide precipitation.

Grade Stainless Steel 310,310S
Standard ASTM A240 / ASME SA240
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness 4 mm To 100 mm
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Form Sheets, Plates, Coils, Slatting Coils, Perforated Coils
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)


Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

440 Stainless Steel Coil Strip Specifications:

Grades
Stainless Steel J1, J2, J4, 201, 202, 301, 304, 304H, 304L , 309, 309S, 310, 310S, 316, 316L, 316TI, 321, 321H, 347, 409, 410, 410S, 420, 430, 441, 904L

Thickness

0.2mm - 60mm

Width

3.2mm - 2000mm

Length

AS PER CUSTOMER'S REQUIREMENT

Type of Material

STAINLESS STEEL SOFT, DEEP DRAW, EXTRA DEEP DRAW, QUARTER HARD, HALF HARD,FULL HARD.

Finish

NO.1, 2B, 2D, 2H, 2R, No.4, HAIRLINE, SCOTCH BRITE, SATIN FINISH, NO.8, BA.

Standard

ASME, ASTM, AISI, EN, BS, GB, DIN, JIS, SUS, etc.

manufacture

Cold Rolled ,hot rolled

Application

Decoration,Industry,food processing and medical industry ,ships building industry etc.

Certification

SGS, BV, IQI, TUV, ISO, CE, etc

Coil Weight

3-10 Tons Or As Your Requirements

Tolerance

±1%

MOQ

1 ton

Supply Ability

5000 tons / month

Lead Time

7-15 working days after the receipt of 30% deposit

Payment Terms

30%T/T Advance + 70% Balance

Price Terms

FOB, CFR, CIF, EXW

Packing

Standard sea-worthy package or as required

Characteristics of 440 Stainless Steel Coil:


Excellent work hardening (non-magnetic);

Excellent high temperature strength;

No magnetism in solid solution state;

Cold rolled products have good gloss and beautiful appearance.

Uses: seawater equipment, chemical, dye, paper making, oxalic acid, fertilizer and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts.



440 is widely used in the chemical industry because of its excellent corrosion resistance. 440 is also a derivative steel of 18-8 austenitic stainless steel, with 2 ~ 3% Mo added. On the basis of 440, many steel grades are also derived. For example, 440Ti is derived after adding a small amount of Ti,440 is derived after adding a small amount of N, and 317L is derived by increasing the content of Ni and mo

Cold rolling coil
Steel brand: Q235, Q195, Q195L, Q195LD, 08AL, SPCC
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95HV (softened and hardened we can offer)
Weight: 3-9MT/C (or according to the customerí»s requirement)
Surface: General, Bright, Dull and Mirror finish, oiled or unoiled
Packing: Standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements


Cold rolling coil
Steel brand: Q235, Q195, Q195L, Q195LD, 08AL, SPCC
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95HV (softened and hardened we can offer)
Weight: 3-9MT/C (or according to the customerí»s requirement)
Surface: General, Bright, Dull and Mirror finish, oiled or unoiled
Packing: Standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements

410 stainless steel is a stainless steel grade produced in accordance with American ASTM standards, which is equivalent to 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon, 13% chromium, 410 stainless steel: good corrosion resistance, machinability, general purpose blades, valves. 410 stainless steel heat treatment: solution treatment (�¢??) 800-900 slow cooling or 750 fast cooling.Features: high strength; excellent machinability; hardening after heat treatment; magnetic; not suitable for harsh corrosive environments.
410 stainless steel is a type of martensitic stainless steel that contains 11.5-13.5% chromium and has excellent corrosion resistance, high strength, and hardness. It is a magnetic material and can be hardened through heat treatment, making it suitable for use in various applications that require high strength and corrosion resistance.
Some of the key properties of 410 stainless steel include:
Corrosion resistance: 410 stainless steel is highly resistant to corrosion, including water, steam, and chemical environments. However, it is not suitable for use in highly acidic or alkaline environments.
Hardness: 410 stainless steel has high hardness and strength, making it suitable for use in applications that require wear and abrasion resistance.
Heat treatability: 410 stainless steel can be hardened through heat treatment, allowing for improved strength and hardness.
Magnetic properties: 410 stainless steel is magnetic and can be used in applications that require magnetic properties.
Some of the common applications for 410 stainless steel include:
Cutlery and kitchen utensils Valve components and pump parts Bolts, nuts, and screws Springs and bearings Medical instruments and dental tools Oil and gas equipment
Overall, 410 stainless steel is a highly versatile material that is well-suited for use in various applications where high strength, corrosion resistance, and hardness are required.
Here are some of the most common international standards for 410 stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276: Standard Specification for Stainless Steel Bars and Shapes
ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
JIS G4303: Stainless steel bars
GB/T 1220: Stainless steel bars

We can provide the following the form:410 stainless steel coil; 410 stainless stee strip;410 stainless stee plate; 410 stainless steel sheets; 410 stainless steel tubes; 410 stainless steel pipe;410 stainless steel flat; 410 stainless steel bar

General blades, mechanical parts, tableware class 1 (spoon, fork, knife, etc.).