Please quote for the following wholesale product requirement -
Product Name: Ore
Specifications :
Type: Magnetite Iron Ore
Grade: 54 - 56%
Specifications : Gravity Should Be 4.1 And Density 5 To 6
Quantity - 15000 Mt Per Month
Size - Lumps (0 To 400 Mm)
1. Magnetite Ore 52+
Density 4.2
Gravity 4.3 Or So
Quantity -5000 Mt To Start With
Required For Mundra (outside The Port For Domestic Use)
Note: Supplier From Goa And Maharastra To Mundra Port Gate With Analysis Report
Payment Terms:
Irrevocable LC at sight, issuance after confirmation by independent party that full cargo is available at port for loading
Destination:
Not Specified
Looking for suppliers from:
Worldwide
Product Description
Please quote for the following wholesale product requirement -
Product: hbi Iron Ore Pellets
Specifications:
1 • Metallization 83.0 - 90.0%; • Fe (Total) 90.0 - 94.0%; • Fe (Metallic) ? • C 0.5 – 3.0%; • S ? • P2O5 0.005 - 0.09%; • Kindly send contract spec with typical and min max figures, as well as a load port analysis to verify
Qty: 30, 000 M.T
Note; Need End Sellers Only
Quantity Required : 30000 Metric Ton/Metric Tons
Shipping Terms : F.O.B.
Payment Terms : Irrevocable LC at sight, issuance after confirmation by independent party that full cargo is available at port for loading
Payment Terms:
for trial order: FCA at warehouse to be paid 100% by TT after Q&Q inspection at the COSCO, or FOB at the loading port by DLC, no upfront payment at all. The payment for the monthly orders after trial order, must be a 100 % DLC
Destination:
Japan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Names: Copper And Iron Ore
Specifications :
Pricing: LME -17% Net, -18% Gross, 1% Commission for the buyer side.
During the Contract Period
Quantity: 100-500 Tons for Trial Order And 5000-10000 MT Per month X 12~24 Months
Payment Terms : for trial order: FCA at warehouse to be paid 100% by TT after Q&Q inspection at the COSCO, or FOB at the loading port by DLC, no upfront payment at all. The payment for the monthly orders after trial order, must be a 100 % DLC
Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Please quote for the following wholesale product requirement -
Product Name: Iron Bars
Specifications :
For Patio Benches
Buyer Need Iron Bars To Manufacture Patio Benches And Also A Sample Of Patio Benches
As Per Moq For Iron Bars
And 1 Unit Sample For Patio Benches
