Introduction to the product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.
Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Characteristics of the product
Htti-03-h and htti-04-h are made for cosmetics. The model of htti-03-h is hydrophilic, while htti-04-h is lipophilic. These products have very good characteristics of even granularity and more excellent absorbency to uva and uvb than sun organic screener. They are widely and safely used as inorganic sun screener in the cosmetics and well compatible with other raw materials. They are the ideal additive of the sunscreen, anti-ultraviolet rays cosmetics.
Technical index
Model: htti-03-h
Appearance: white powder
Content of titanium oxide (%): 88
Average of the grain size (nm): 30
Specific surface area (m2/g): 100
Crystal /surface treatment by: especially for cosmetics, hydrophilicity
Characteristics:good transparency, clear blue light and has the ability to resist the ultraviolet ray
Model: htti-04-h
Appearance: white powder
Content of titanium oxide (%): 85
Average of the grain size (nm): 30
Specific surface area (m2/g): 100
Crystal /surface treatment by: especially for cosmetics, lipophilicity
Characteristics:idem
Introduction to the product
These series products of pure titanium dioxide are independently developed by our company and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of 30nm1200nm.
Pure titanium dioxide of our company has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Pure titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Technical index
Parameters (anatase tio2)
Molecular formula: tio2
Cas no.: 13463-67-7
Einecs no.: 236-675-5
Grade: high purity titanium dioxide
Appearance: white powder
Type: nano material
Model: httip-01-30 Httip-01-50 httip-01-100
Purity: 99.8% 99.9% 99.9%
Average particle size d50: 30nm 50nm 100nm
Specific surface area(bet): 30m2/g 20m2/g 13m2/g
Moisture: 0.8% 0.6% 0.5%
Parameters (rutile tio2)
Molecular formula: tio2
Cas no.: 13463-67-7
Einecs no.: 236-675-5
Grade: high purity titanium dioxide
Appearance: white powder
Type: nano material
Model: httip-02-30 httip-02-50 Httip-02-100
Purity 99.8% 99.9% 99.9%
Average particle size d50: 30nm 50nm 100nm
Specific surface area(bet): 30m2/g 20m2/g 13m2/g
Moisture: 0.8% 0.6% 0.5%
Application Base materials in electron components, for example multilayer ceramic capacitors (mlcc); cosmetics; textiles, ceramic capacitors, positive temperature coefficient thermistors, spurting materials, optical glass and steel.
A ferro-titanium oxide mineral with ideal molecular formula FeTiO3. It is a weakly magnetic black or steel-gray mineral. Ilmenite is the most important titanium ore and the main source of titanium dioxide, used in paints, printing inks, fabrics, plastics, paper, sunscreen, food and cosmetics.
Titanium can also form many compounds, they also have a variety of special properties and uses, such as titanium dioxide, is a white powder, it is the best white pigment, commonly known as "titanium white", 1 gram of titanium dioxide can be more than 450 square centimeters of the area painted white. Titanium dioxide used as white pigment in the world is more than hundreds of thousands of tons a year. If titanium dioxide is added to the paper, it can make the paper white and opaque, so the paper used in the manufacture of banknotes and fine arts is sometimes added to titanium dioxide, in addition, in order to make the color of the plastic lighter and make the rayon luster soft, it is sometimes added to titanium dioxide. Titanium dioxide is known as the whitest thing in the world. Most of the titanium in nature is in a dispersed state, mainly forming minerals ilmenite TeTiO3 and rutile TiO2, and vanadilmenite. China's Panzhihua area of Sichuan Province is very rich in vanadilmenite, reserves of about 1.5 billion tons.
So how was titanium discovered? In 1791, British scientist Grigor found a kind of ore in the outskirts of Minahan - black magnetic sand, through the study of this ore, he believes that there is a new chemical element in the ore. The new element was named after Minahan, the place where the ore was found.
Four years later, the German chemist Klapoute found this new element from a red ore in Buynik, Hungary, he named it after the name of the "Tai Dan" in Greek mythology (the Chinese translation of its original name, named titanium), Klapoute also specifically pointed out that the new element "Minahan" discovered by Grigor is titanium, but found at that time, It's actually powdered titanium dioxide instead of titanium metal. Until 1910, the American chemist Handel was the first to produce 99.9% purity of the metal titanium, but a total of less than 1 gram. From the discovery of titanium to the production of metal titanium, before and after 120 years, to 1947, people began to refine titanium in the factory, at that time, the annual production of only 2 tons. By 1955, production had surged to 20,000 tons. By 1972, annual production reached 200,000 tons. The use of titanium is more and more widely, more and more people's attention, people call it the future of steel, the 21st century metal.
Introduction to the Product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.
Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to UVA and UVB, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Characteristics of the Product
HTTi-01 is a nano powder made of nano TiO2 mixed with some metal or metal oxide. Its crystal is anatase, and it may be used for producing photocatalyst. Under the illumination of light of less than 400 nm, the valence electrons of this powder are sent to the conduction band to put the electron and cavity in action with O2 and H2O absorbed on their surface and produce superoxide anion radicals. These radicals have the function of decomposing hazardous gas and organic pollutants through photo catalysis and antisepsis through photo catalysis, and can be widely used in air purification and sewage treatment. Moreover, this product is characterized by low cost, good stability, high photocatalytic activity and wide range of absorption of light wave. HTTi-01-W and HTTi-01-Mn has the highest catalytic activity, HTTi-01-N also has high catalytic activity. These products can be used in the field of decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment, etc.
Technical Index
Model: HTTi-01
Appearance: White powder
Content of titanium oxide (%): 99
Average of the grain size (nm): 10
Specific surface area (m2/g): 150
Crystal /surface treatment by: anatase
Characteristics: large specific surface, high photocatalytic activity
Model: HTTi-01-W
Appearance: White powder
Content of titanium oxide (%): 94
Average of the grain size (nm): 10
Specific surface area (m2/g): 100
Crystal /surface treatment by: anatase
Characteristics: highest photocatalytic activity
Introduction to the product
These series products of pure titanium dioxide are independently developed by our company and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of 30nm1200nm.
Pure titanium dioxide of our company has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Pure titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Technical index
Parameters (anatase tio2)
Molecular formula:tio2
Cas no.:13463-67-7
Einecs no.:236-675-5
Grade:high purity titanium dioxide
Appearance:white powder
Type: micro material
Model: httip-01-500 Httip-01-1200
Purity: 99.9% 99.9%
Average particle size d50: 0.5um 1.2um
Specific surface area(bet): 7m2/g 2m2/g
Moisture: 0.3% 0.3%
Parameters (rutile tio2)
Molecular formula:tio2
Cas no.:13463-67-7
Einecs no.:236-675-5
Grade:high purity titanium dioxide
Appearance:white powder
Type:micro material
Model:httip-02-500 Httip-02-1200
Purity: 99.9% 99.9%
Average particle size d50: 0.5um 1.2um
Specific surface area(bet): 7m2/g 2m2/g
Moisture: 0.3% 0.3%
Application Base materials in electron components, for example multilayer ceramic capacitors (mlcc); cosmetics; textiles, ceramic capacitors, positive temperature coefficient thermistors, spurting materials, optical glass and steel.
Introduction to the product
These series products of pure titanium dioxide are independently developed by our company and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of 30nm1200nm.
Pure titanium dioxide of our company has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Pure titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Technical index
Parameters (anatase tio2)
Molecular formula:tio2
Cas no.:13463-67-7
Einecs no.:236-675-5
Grade:high purity titanium dioxide
Appearance:white powder
Type: micro material
Model: httip-01-500 Httip-01-1200
Purity: 99.9% 99.9%
Average particle size d50: 0.5um 1.2um
Specific surface area(bet): 7m2/g 2m2/g
Moisture: 0.3% 0.3%
Parameters (rutile tio2)
Molecular formula:tio2
Cas no.:13463-67-7
Einecs no.:236-675-5
Grade:high purity titanium dioxide
Appearance:white powder
Type:micro material
Model:httip-02-500 Httip-02-1200
Purity: 99.9% 99.9%
Average particle size d50: 0.5um 1.2um
Specific surface area(bet): 7m2/g 2m2/g
Moisture: 0.3% 0.3%
Application Base materials in electron components, for example multilayer ceramic capacitors (mlcc); cosmetics; textiles, ceramic capacitors, positive temperature coefficient thermistors, spurting materials, optical glass and steel.
It is a high-quality TiO2 pigment having desirable properties such as high brightness, tinting strength, good colour, and excellent dispersion for consistent optical performance.
It conforms to BIS 411:2020 standards.
Application:
This is a pigment form of TiO2 The characteristics are suitable for both aqueous and non-aqueous media. Suitable for use in interior paints, paper, plastics, linoleum, rubber, leather, furnishings, soap and cosmetics, and other applications.
Rutile & Anatase
TIO2s usance areas are paints, varnishes as well as paper and plastics, printing inks, fibres, rubber, cosmetic products, the production of technical pure titanium, glass and glass ceramics, electrical ceramics, catalysts, electric conductors and chemical intermediates.
Ti-Pure R-902+ is a multipurpose rutile titanium dioxide pigment manufactured by the chloride process for both interior and exterior coatings applications. It is a fine dry powder with the following general properties. Table 1. Analysis and Physical Properties of Ti-Pure R-902+ Property.
