TPE (Thermoplastic Elastomer) Is a kind of high elasticity, high strength, high elasticity rubber,, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately.
Thermoplastic elastomer has thermoplastic processing performance, but also has the physical properties of vulcanized rubber. It can be described as a combination of advantages of plastic and rubber.
TPV (thermoplastic vulcanizate) is also known as elastomeric alloys (EA). TPVs are formed in a reactive compounding process that is usually the combination of a polyolefin (Polypropylene or Polyethylene) with an elastomer (SBR, NR, EPDM, NBR or Butyl). In a reactive compounding process, the elastomer is completely cured. This dynamic vulcanization process in TPV production generates the webbed network in the elastomer domain while still retaining melt- processing capabilities. TPV consists of micron size cross-linked elastomer particles dispersed throughout a continuous matrix of thermoplastic material. Because of its thermoplasticity and melt flowability, TPV can be processed on standard thermoplastic equipments (such as injection molding, extrusion, blow molding, calendaring, overmolding etc.) with the efficiency and economy associated with thermoplastic materials. Further, the scrap from these processes can be recycled.
OEM is welcome.
Email:shanghaikuhoo@163.com
KUHOO TPE/TPV features
1. Wide range of hardness;
2. Non-sticky,
3. Easy to process and color;
4. Overmolding to PA,PP, PE, ABS;
5. Superior Resilience;
6. Excellent brittle temperature;
7. Environmental-friendly; 100% recyclable;
8. Low odor and fogging;
9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion.
10. Excellent UV and aging resistance
Shanghai Kuhoo Polymers Co., Ltd (TPE TPR TPV)
TPE, TPR(Thermoplastic Elastomer or thermoplastic rubber) Is a kind of high elasticity, high strength, high elasticity rubber, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately. Injection, extrusion, blow molding, overmolding are all suitable.
Features of KUHOO TPE raw material, tpe material, TPE compound, TPE granule, TPE resin, TPE pellet or thermoplastic rubber or Thermoplastic Elastomer:
1. Wide range of hardness;
2. Non-sticky,
3. Easy to process and color;
4. Overmolding to PA,PP, PE, ABS;
5. Superior Resilience;
6. Excellent brittle temperature;
7. Environmental-friendly; 100% recyclable; REACH RoHS compliance;
8. Low odor and fogging;
9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion.
10. Excellent UV and aging resistance
Thermoplastic vulcanizates(TPV's) are a very special class of TPE prepared by dynamic vulcanization or cross-linking process of PP and EPDM rubber,
It builds favourable properties which make it high performance polymer, compressible and heat resistance.
TPV seen strong growth in automobile seals, pipe seals, wire & cable jacketing compound and other application where a high heat resistance required. Thermoplastic vulcanizates with excellent properties of heat resistant and breaking strength
Properties
High temperature resistance
Wide range of hardnesses
Resistance to chemicals and weathering
Low compression set
Flex fatigue resistance
Lightweight
Good colourability
Typical Applications
Interior and Exterior Automotive parts
Wire & Cable Jacketing compound
Gaskets
Grommet, sockets
Building and construction materials
Sporting goods
Electrical and electronics good
Specification
Hardness
Set(ISO 868) (Shore A-D) 40 A - 55 D
Density
(g/cm3) 0.93 - 1.1
Compression(Set) Excellent
Tensile Set (ISO 527) 3 MPa 10 MPa
Tear Set (ISO 34) 20 kg/cm3 - 120 kg/cm3
Elongation Set (ISO 527) (%) 500 1000
Working Temp. Max. (C) 140
Working Temp. Min.(C) -40
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Good
Motor Oil Resistance Excellent
Acid-Base Resistance Excellent
UV-Ozone Stability Excellent
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed
Properties
Good Dimension Stability
High Impact Strength
Good Heat Aging Properties
Low Density
Good Chemical Resistance
Good Processability
Low Cost
Extensive Compounding capabilities
Good Recyclability
Non-hygroscopic, pre-drying is not necessary
Coloured grades available
Typical Applications
Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs
Industrial products- gasket & seal, weather striping etc.
Appliance and housewares Products
Sporting goods
Personal Care goods
Wire and cable Flexible cord, welding cable jacket , automotive wire & cable
Health care
Specification missing -take from website
Specification
Hardness
Set(ISO 868) (Shore A-D) 50 �??-60 D
Density
(g/cm3) 0.88 1.12
Compression(Set) Very Good
Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3
Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3
Elongation Set (ISO 527) (%) 400 - 1000
Working Temp. Max. (C) 100
Working Temp. Min.(C) -40
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Medium
Motor Oil Resistance Medium
Acid-Base Resistance Excellent
UV-Ozone Stability Excellent
Wide hardness range
Does not require vulcanisation-quire higher saving on the processing costs
Remains flexible at low temperatures
High temperature resistance
Electrical insulator with very low conductivity
Has grades with very low compression set
Grades having excellent abrasion resistance
Excellent tear resistance
100% recyclable
PVC free
Resistance to solvents
Resistance to oil
Resistance to acids bases and detergents
Resistance to UV and ozone
Resistance to bacterial and fungus growth
Has low toxic potential, with many grades conforming with FDA regulations
Halogen free flame retardancy (VO-V1-V2)
Colored grades available
Allows direct colouring during processing by utilizing PP or PE based color
2-shot molding onto wide range of plasics
Suitable for co-extrusion process
Thermoplastic elastomers (TPEs) are also known as thermoplastic rubbers. These are a class of copolymers, which are used are plastic and rubber that includes a material with both thermoplastic and elastomeric properties. With the help of compounds as SBS or SEBS it forms Thermoplastic elastomers which are known as TPE, it facilitates to know the general level of performance and asset of the compound
Properties
grades and transparent grades available
Household Appliances
Consumable Goods
Pleasant Surface Feel (Soft Touch)
Adhesion to Polar thermoplastic such as ABS, PC & PP
Good Tear strength, abrasion resistance
High Flexibility
Durability
Low compression set
Typical Applications
Kitchen
Utensils
Household Articles
Soft GripSeals
manufacture of shoe sole material
shock-absorbing material
packing material grips
anti-slip pads, rubber and plastic modification
Specification
Hardness
Set(ISO 868) (Shore A-D) 30 A - 50 D
Density
(g/cm3) 0.88 1.4
Compression(Set) Good
Tensile Set (ISO 527) 1.5 MPa 12 MPa
Tear Set (ISO 34) 20 kg/cm3 - 60 kg/cm3
Elongation Set (ISO 527) (%) 300 - 1200
Working Temp. Max. (C) 130
Working Temp. Min.(C) -30
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Medium
Motor Oil Resistance Good
Acid-Base Resistance Excellent
UV-Ozone Stability Medium
FlexiShine Pollyblends has launched a next-generation technology to create glass-filled PP compounds. We create compounds with unprecedented strength. Glass Filled PP Compound is prepared by compounding Polypropylene Homo-Polymer with a fine grade of glass. The entire process followed as par the industry standard and up to mark of all grades which are suggested by the authorities.
Glass-Filled PP Compound manufacturers in India use a special technique to increase the long term thermal-mechanical properties. We use some additives like antioxidants, lubricant, processing aid. It shows good dispersibility and excellent balance of properties in the final product if some compounds are used directly or diluted with desired grades of polypropylenes.
FEATURES
High strength
High chemical resistance
High melting point (150 to 200F)
Very low density
Abrasion resistance
Lightweight
Low-cost fabrications
Machinable
Maintenance-free
Weldable
Wipes clean
Dimensional stability
Excellent electrical properties
Typical Applications
Acid Tank/Lineup
Battery Cases
Tank Covers
Etching
Machines/Rinse Tubes
Machined Parts
Fume Hoods
Ducts
Scrub Stations
Metal Plating Barrel
