The core of the DCFCM technology is the integrated technology of axial flow cyclone plus microbubble air flotation and charged membrane filtration. Based on this technology, we have developed a series of integrated oil-water separation equipment, which have been successfully working in oil processing stations, oil drilling platforms, transfer stations, and sewage treatment plants in Sinopec, PetroChina and CNOOC. It has completely solved the old problems from conventional process flow like complex equipment, more land area, messy pipelines, low degree of self-control, and inconvenient operation. It is a new low-cost and efficient process and a method featuring of fast, efficient and digital in oilfield oily waste water treatment.
Output of oil, water, and gas of oil wells are the most basic production parameters for oilfields to increase revenue and reduce expenditures, and realize intensive and digital production. However, due to different nature of the crude oil of each well, there are huge differences in fluid production, gas production, separated water , as well as the irregularities of oil well fluids and other complex factors, thus it is difficult to find a simple operation with strong adaptability, and measurement accuracy at home and abroad, which severely restrict improvement of the information construction and intensive management of the oil field. Our credible three-phase oil measurement technology is for this problem, especially for those oil wells that enter the high water period or high gas content.
The automatic cleaning line for used oil barrels uses high-pressure hot water to clean the inner and outer walls of the barrel at 360 degrees without dead angles . After air-drying, it can be further repaired and then sold as a container.
The whole system includes
Check line
Outside cleaning line
Internal cleaning line
Airdry
Repair line
Oil-water separation device
Sewage purification and reuse device
Processing capacity: 20-200 per hour, can be customized
The used lubricating oil vacuum distillation device designed by our company has the following characteristics:
With high vacuum distillation method, the base oil components can be distilled at 340 C, which is far lower than the current popular domestic used oil vacuum distillation of 380-400 C, which effectively avoids base oil molecules cracking at high temperature , reducing production of light oil like naphtha, improves the quality and yield of base oils, and decreases risk of plant operation.
Using automatic continuous operation, during normal operation, only one person per shift can complete the control.
The heating system adopts electromagnetic heating, no open flame, and high safety.
The plant runs with low energy consumption, processing every ton of used oil, and the energy consumption required for heating is only about 200,000 kcal.
Modular design, the on-site installation and commissioning cycle is greatly shortened. For the daily processing capacity of less than 20 tons, the whole set of equipment including heating, heat exchange, condensation, vacuum, atmospheric distillation, vacuum distillation, refining, compounding, control, circulating pool, cooling water tower, operating platform, etc. It can be transported by a truck.
Small footprint. Taking the processing capacity of 10 tons/day as an example, the overall area of the device is only 28 square meters (4 meters x 7 meters).
Quality of the product is good, and quality of the product produced has been tested by quality inspection department and meets the new lubricating oil quality standard.
SBS Modified Asphalt Complete plant (Mobile, Fixed) System Module:
The production and processing of SBS modified asphalt must be carried out within a certain temperature range, which is determined by experiments with different grades of asphalt. Matching domestic high-quality thermal transfer oil heating furnace, pneumatic valve, temperature controller, heat-conducting oil, burner and program controller imported from Germany or Japan adopted to ensure the constant temperature control. Through automatic combustion and stop of heating furnace, circulating of heat-transfer oil, automatic opening and shutting of pneumatic valve, the heat is sent to each heating part and set by the temperature controller, so as to achieve temperature control automation.
In order to meet the needs of different asphalt processing, complete set of equipment can be equipped with stabilizer adding device and auxiliary agent adding device. After the stabilizer is metered, the pump is directly added to the swelling tank. After grinding and reaction, the SBS particles and the asphalt can be combined tightly together, they can prevent segregation for a long period of time. The additives are added to the incubation tank after being metered when needed, which can effectively improve the performance indexes of the modified asphalt.
Product Features
Appearance : White Or Light Yellow Crystal Powder
Odour: Sulfur Dioxide
Taste : Salty
Melting Poing : 150
Specific Density1.48
Ph : 4.0-4.6
Solubility : Soluble In Water ,insoluble In Alcohol
Application:
1. For industry
Mordant of printing and dyeing; Dechlorinate of textile after bleaching;
Sulphonated agent and reducer of chemical industry and pharmacy;
Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ;
The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment.
2.For food additive
Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc)
Specifications:
Na2S2O5 97% min
SO2 65% min
Fe 0.0015% max
water-Insoluble 0.01% max
As 0.0001% max
PH 4.0-4.6
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Purity: 85% - 99.5%
Granular Particle size :from 0.15 mm to 5 cm
Usage: for dye , alkali ,textile ,drilling oil , water treatment ,melting snow/de-icing , food , pharmaceutical and so on
Packing
250gram,500gram,750gram,1KG, 2LB,3LB, 4LB, 10LB PE&PET complex plastic bags or bottle in cartons, 20kg,25kg, 50kg ,1000kg,1200kg,1250kg plastic woven bags and kraft paper bag with PE inside.
Capacity: 100 CMD/500CMD/1000~6000CMD
Origin: Malaysia
Price: USD100K or more
Loading Port: Malaysia/Taiwan
Min Cost: USD100K
Max Cost: USD3M
Guarantee: 5 Years
