Supplier : Rotary Oil Seals, V Rings, Wiper Seals, O Rings, Hydraulic Seals And Other Rubber, Rubber Metal, Rubber Fabric Sealing Products Of Make Dichta Sa, Coupling , Polybond Anti Vibration Mountings ,Continental Contitech Make V Belts ,Taper Lock V Pulleys , Kirloskar Valves & Pumps Etc. Pressure Gauges, Dpgs, Seal Diaphragm Gauges, Syphon Tubes, Temperature Gauges, Rtds, Thermocouples, Thermo Wells, Valves And Manifolds, Level Gauges And Accessories Including Impulse Tube Fittings.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m
Main Color - black
Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.
Other waterproof applications on cars and new energy cars
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.
BACKGROUND
* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.
* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion
* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.
APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
We are the leading exporter, supplier and manufacturer of Diesel Engine Cooling Liquid. Based in Mumbai, Maharashtra our treatment has especially been designed to overcome the undesirable characteristics that are usually found when using chromate or soluble oil corrosion inhibitors. The treated re-circulating water of cooling liquid is usually colorless. The leakage at the packing glands produces zero crystalline deposits or unsightly stains. Youâ??ll also not experience any foam or carbonization at points of high transfer. It is an effective corrosion inhibitor that is non-chromate and non-abrasive. It is not a soluble oil and is pH buffered. Compatible with antifreeze it protects the Ferrous and copper bearing metals by Minimizing metal oxide deposits.
Info :
Prevents acid attack
Applicable where water is the heat source for the evaporator/distiller
Reduces disposal and toxicity problems
Safer to handle
Does not damage seals, hoses packing
No foam or carbonized deposits
Not sensitive o overdosing
Easily tested and controlled
Dose not form fouling deposits when mixed with ethylene glycol
Application and Use The recommend treatment level of PARAFIX-DEWT diesel engine cooling water treatment is 3000-4500ppm. This represents an initial dosage of 3.2 KG per ton of circulating water. Subsequent dosages are dependent upon the concentration found in the re-circulating water.
Diesel engine cooling water treatment is an effective corrosion inhibitor for all the normal ferrous and copper bearing metals in a circulating water system. There are no deleterious effects on glands; etc. It is compatible with antifreeze materials will not form objectionable sludge's.
Efficient heat transfer is assured since corrosion is held to ammonium and surfaces are maintained free of deposits. Diesel engine cooling water treatment is recommended for systems with good quality distilled water makeup.
1. Hevea Rubber (Hevea Brasiliensis)
- The primary raw material for natural rubber comes from the Hevea tree (Hevea Brasiliensis), mainly cultivated in Southeast Asia, particularly in Thailand.
2. Sumatra Rubber
- Rubber is also produced in Sumatra, Indonesia, serving as another globally significant production region.
Natural Rubber Supply Chain Process:
1. Cultivation and Harvesting:
2. Processing and Production:
3. Domestic and International Trade:
4. Product Manufacturing:
Applications of Natural Rubber
1. Automobile Tires:
- Natural rubber is a key raw material for the manufacturing of automobile tires due to its excellent wear resistance and elasticity.
2. Shoe Soles:
- Widely used in the production of shoe soles, providing cushioning and durability during walking.
3. Industrial Products:
- Utilized in a variety of industrial products, serving as vibration control materials and sealing materials.
4. Medical Devices:
- Used in the production of medical gloves and some medical devices due to its flexibility and biocompatibility.
Applications of RSS (Rubber Smoked Sheet) and TSR (Technically Specified Rubber):
1. RSS (Rubber Smoked Sheet):
- Automobile Tire Manufacturing:
- RSS is extensively used in the production of high-end automobile tires due to its excellent physical properties and quality, making it a reliable material for tires that require high wear resistance and durability.
- High-Quality Products:
- Additionally, RSS is employed in the manufacturing of other high-quality rubber products, including industrial goods, luxury consumer goods, and some medical devices.
2. TSR (Technically Specified Rubber):
- Automobile Parts Manufacturing:
- TSR products are widely used in the manufacturing of automobile parts. In components requiring vibration control, such as engine mounts and bushings, TSR is selected for its specific properties.
- Industrial Applications:
- Used in the manufacturing of industrial products, TSR is an ideal material for products where the flexibility and elasticity of rubber are essential.
- Medical Devices:
- TSR is also used in some medical devices, playing a crucial role in the production of medical products due to its biocompatibility.
