Type : planetary, helical, worm
Orientation : horizontal, vertical
Mounting : foot, flange
Input (rpm or ratio) : 750-1500 rpm
Output torque (nm) : 20-300 rpm
Brand : roadcon
Material : cast iron, steel and bronze
Application : industrial use
Condition : new
Power source : 5 hp to 125 hp
Voltage (v) : 220v
Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the series h helical gear boxes range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.
Helical gear motor feature
Drive motor power(p1) y/y2 induction motor, 0.12kw~180kw
Voltage scope(v) 110v~660v or make specially according to clients’requirement.
Phase single(under 3kw) or three
Pole 2 or 4 or 6 or 8 or 10
Motor speed(n1) relys on motor pole:650r/min~3000r/min
Frequency 50hz or 60hz or 50/60hz
Ip ip54 or ip55 or make specially according to clients’ requirement.
Terminal box 0º or 90º or 180º or 270º, any position is allowed
Connect method direct type, if client’s convenient to replace motor, please consider to add extra motor adapter.
Ratio scope(i) 3.2~264, if client want bigger ratio, please consider combination type.
Rated torque(n.M) 72n.M~14800n.M
Output speed(n2) depends on motor pole: n1/ratio(i), n2=0.06r/min~1090r/min
Service factor(fs) 1.2~5.0
Mount type foot and shaft mount
Different type, different size, once confirm type well, we will provide detailed packing information.
TK - Bevel Helical Geared Motor are bevel gearboxes with monoblock housing. They are intended for applications requiring higher efficiency and strength. Their input and output shafts are perpendicular to each otherBevel gearboxes can have a maximum of three stages in a single housing. Larger sizes are available only with three stages in a monoblock housing. A higher number of transmission ratios (up to six) can be implemented through the use of additional housings.
1. Moq: 1 set
2. Packing method: polywood
3. Delivery lead time: 20-25 days
4. Payment terms: fob, cif, ddp
5. Payment method: t/t, 30% in advance, 70% before delivery
6. Shipping port: shanghai
Material:
Housing: ht250 cast iron
Gear: 20crmnti h, high grade allo with carburization, surface hardness: 58-62hrc, center hardness: 33-48hrc
Grinding precision grade: iso1328-1: 1995 class 5-6, surfaceness: 0.8, carburization depth: 0.6-1.5mm
Bearing: 42crmo
Warranty: 18 months
Applications:
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions.
Fumigation case, weight and dimensions depend on gearbox size
Power range:46000 kw
Transmission ration range:1.25450
Output torque:top to 950 kn.M
Characteristics:
, design
1.) highly standard modular designed, more sizes with a reduced variety of parts.
2.) higher operational reliability combined with increased power capacity.
, mounting position
The gear units can be supplied for either horizontal or vertical installation.
Other arrangements are also possible on request.
, long service life
Under the condition of accueately selecting type size and the normal maintenance and use, main components (expect those easily-disabled) can last as long as up to more than 50, 000 hours.
, low noise
All key components are finished by precisely machining; grinding the gears; designing noise-absorbing housings; accurate assembly, and finally tested, and therefore, fairly low noise is reached.
, thermal conduction
1.) the gear units have a high efficiency.
2.) through enlarged housing surface areas.
3.) because large fans incorporating a new type of air conduction fan cowl are being used.
Hb series bevel-helical right angle shafts gear box
2. Packing method: polywood
3. Delivery lead time: 20-25 days
4. Payment terms: fob, cif, ddp
5. Payment method: t/t, 30% in advance, 70% before delivery
6. Shipping port: shanghai
Material:
Housing: ht250 cast iron
Gear: 20crmnti h, high grade allo with carburization, surface hardness: 58-62hrc, center hardness: 33-48hrc
Grinding precision grade: iso1328-1: 1995 class 5-6, surfaceness: 0.8, carburization depth: 0.6-1.5mm
Bearing: 42crmo
Warranty: 18 months
Applications:
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions.
Fumigation case, weight and dimensions depends on the gearbox size.
Power Range: 4â??6000 KW
Transmission Ration Range: 1.25â??450
Output Torque: top to 950 Kn.m
Characteristics:
Design
1.) Highly standard modular designed, more sizes with a reduced variety of parts.
2.) Higher operational reliability combined with increased power capacity.
Mounting position
The gear units can be supplied for either horizontal or vertical installation.
Other arrangements are also possible on request.
Long service life
Under the condition of accurately s
electing type size and the normal maintenance and use, main components (expect those easily-disabled) can last as long as up to more than 50,000 hours.
Low noise
All key components are finished by precisely machining; grinding the gears; designing noise-absorbing housings; accurate assembly, and finally tested, and therefore, fairly low noise is reached.
Thermal conduction
1.) The gear units have a high efficiency.
2.) Through enlarged housing surface areas.
3.) Because large fans incorporating a new type of air conduction fan cowl are being used.
