Established wide range of measuring instruments compactable for digitization: CMM - Zeiss make, portable CMM - Faro make, profile projector and testing equipment for special processes.
# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.
# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.
# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.
# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm
# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.
# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.
# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.
# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.
# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°
# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.
Mould Oscillation and Deflection Detection Instrument
Overview
The mold is a device that shapes the cast product in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. The main function of the mould oscillation deflection detection instrument is to detect the the mould oscillation table s oscillation frequency, amplitude, deflection rate, phase, oscillation trajectory curve, etc. Through the detection and adjustment of the detection instrument, the mold moves along the outer arc of the continuous casting machine according to the given amplitude, frequency and waveform deflection characteristics.
The actual oscillation parameters of the mold oscillation table during the operation and production process and the process parameters of the cast products cannot be effectively known without the data detection of the mold deflection detection instrument, so that the operator cannot adjust the mould s production process parameters in real time according to the real-time situation of the on-site production.
The continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can formulate the control strategy of the mould according to these actual parameters, and improve the output and quality of the product within a safe and reliable range.
The structure of the instrument
Continuous casting mold oscillation and deflection detection instrument is mainly composed of sensor system, sensor signal conditioning circuit, power supply circuit, synchronous data acquisition module, communication cable, and software data analysis system.
There are three axial acceleration sensors installed in the mold oscillation and deflection detection instrument, one of which is to detect the vertical oscillation signal (Y axis), and the other two are to detect the horizontal oscillation signal (X and Z axis). The signal obtained by the sensor is processed by the preprocessor and the preprocessing module. The oscillation signal and sensor status signal will be filtered and normalized, sent to the synchronous data collector for digitization and feature extraction, and the data is analyzed and processed by the master computer software to obtain various oscillation parameters and process parameters required by users.
The Z axis adopts a new design of cross rails and counterweights. The lens is lifted and lowered with balanced force to ensure accuracy. The continuous zoom lens can be continuously zoomed from 20X to 120X. The LED cold light source (upper and lower light sources) avoids secondary deformation of the workpiece. Easy-to-use image measurement software. Gapless friction transmission, small-range fine-tuning and fast movement are possible. The optical image measuring instrument not only uses high-definition CCD imaging, combined with multi-pole zoom objective lenses, but also comes with easy-to-use image measurement software. It has point, line, circle, two-point distance, angle measurement functions and coordinate translation functions. The measurement data can be exported to EXCEL, WORD or the geometric figures of the measured elements can be exported to DXF. The automatic edge-finding function of the software further enhances the measurement accuracy and reduces human errors.
Gas Dew Point Detection Instrument/Trace Water Content Tester
Transformer Oil Tester
Application:
Dew point uses imported alumina or polymer film capacitive dew point sensor. It measures the trace moisture content in various trace gases. It is suitable for some online analysis occasion where the moisture content control requirement is quiet strict such as petrochemical, natural gas, industrial gas, semiconductor industry, drying industry, food industry, power industry, machinery manufacturing, air separation industry, and pharmaceutical industry.
dew point tester Feature
Portable design:light,portable,convenient to use.
Rapid measurement:when start work,it takes a short time on measurement,and get the humidity value.
Low gas consume:it just consume 2L(101.2kPa)in a test.
Self-locking joint:the self-locking joint is imported from Germany,safe,reliable,leakproof.
Data memory:high-capacity design,save up to 50 test data.
Legible display:dew point,Micro moisture(ppm),ambient temperature,ambient humidity,time,date,battery,etc,can be read from the LCD.
RS232 port:can be connected with serial printer,carry on data printing.
Built-in power supply:built-in 4Ah rechargeable lithium battery,it can work continuously at least 10 hours.
dew point tester Specification
dew point Ranges -60 ~+20
Accuracy ±1(-60~+20)
Test time(+20)
HD Observation Machine Advantages
Original colour
HD Graphics comparison
Take screenshots
Large viewing area
Easy to communicate
USB stick storage
Depth measurement
Local zoom
Arbitrary labelling
Raster measurcmcnt
Mouse measurement
Simple operation
Specifications
Power supply voltage: 220V
Frequency: 60HZ
Display size: 24-inch 2K display
(can be upgraded to 27-inch 4K display)
Resolution: 1000~3000W industrial pixel
Magnification: 0~80/160/250 times
Maximum field of view: 90x50mm
Measurement accuracy: 0.01/0.005/0.001mm
Measuring stroke: desktop HD observation machine (X-65/Y-65)
Radiation measurement instruments provide accurate radiation measurements in a variety of applications. From performing handheld gamma radiation measurements to measuring alpha and beta, radiation detectors make it easy to perform the measurements that are critical to any radiation safety program. These radiation monitoring instruments provide flexible options for most basic radiation detection scenarios.
1. What are radiation measuring instruments?
Sources of ionizing radiation have important and indispensable uses in various industries to derive maximum benefit from their applications. To ensure radiation safety for radiation professionals, patients and the public; good radiation safety practices should be followed. The most important practice is to use radiation measuring instruments to measure the radiation in and around the source.
2. What are the types of radiation measuring instruments?
The main types of radiation measuring instruments are: Surveyor, Dose Alarm Instrument, Radiation Monitoring System, Contamination Detector.
3. What are the important factors to be considered in the maintenance of radiation measuring instruments?
Instruments should be kept in the best condition.
Periodic calibration should be carried out as recommended by the authorities.
If the instrument is repaired (or) the detector is replaced, the radiation measuring instrument must be recalibrated.
4. Where can these radiation measuring instruments be calibrated?
Calibration cannot be done in any laboratory. The laboratory must be accredited by AERB (Atomic Energy Regulatory Board of India).
AERB has further made it stringent that the laboratory must be accredited by an auditing body i.e. NABL.
Such laboratories are required to calibrate the radiation measuring instruments at regular intervals.
