The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging .
Technical Data
Product Series FOCUS-6500 Series
Application Home Decoration Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 22N/cm
Tensile Strength 210KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
Smooth and Delicate.
Excellent Adaptation.
Greene nvironmental protection.
Non-toxic tasteless.
Good performance in waterproofing and sealing.
Best quality with outstanding service life.
Applications
Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good
waterproof/mildew proof /airtight and environmental property.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m
Main Color - black
Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.
Other waterproof applications on cars and new energy cars
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.)
2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation - 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility Â40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface.
Good compatibility with various cables.
Wide application temperature range.
Excellent performance in weather resistance, waterproof sealing and anti-aging.
pplications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
