Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30�ºC~160�ºC
Turbidity 10000ppm and small bubble content
Flow rate 0~�±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30C~160C
Turbidity 10000ppm and small bubble content
Flow rate 0~±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
Product overview
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.
The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000mm.
Product features
1. Simple installation, no need for professional workers
2. High precision and low price
3. Can work in humid and water-immersed environment
GMF200 Series Ultrasonic Flowmeter
Model GMF200-D
Principle Ultrasonic time difference principle
Precision ±1%
Display 4x8 Chinese or 4x16 Western dot matrix backlit LCD, supporting Chinese, English, Italian and French languages
Output 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms)
Data interface Isolating the RS-232 application interface, the flow meter can be upgraded through a PC
Pipe Steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, and other dense pipes, allowing lining
Pipe inner diameter 15-6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter)
Medium Water, sea water, sewage, acid and alkali, alcohol, beer, various oils, etc.
Fluid temperature -30~+160�°C
Turbidity 1000pmm bubble content is small
Flow rate 0±10m/s
Working environment Host: -20 ~ +60 C; flow sensor: -30 ~ +160 C
Host: 85% RH; sensor protection grade: IP67
Power supply 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time.
Power consumption 1W
Housing material Flame retardant ABS
Host weight 390g
GMF200-H series hand-held ultrasonic flowmeter realizes non-contact measurement of liquid flow. Install the sensor on the outer wall of the pipe to complete the flow measurement. With small size, easy to carry, accurate measurement and so on.
Widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow calibration, temporary detection, flow inspection, water meter balance debugging, heating network balance debugging, and energy saving monitoring. It is a necessary tool for timely flow detection.
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging .
Technical Data
Product Series FOCUS-6500 Series
Application Home Decoration Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 22N/cm
Tensile Strength 210KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
Smooth and Delicate.
Excellent Adaptation.
Greene nvironmental protection.
Non-toxic tasteless.
Good performance in waterproofing and sealing.
Best quality with outstanding service life.
Applications
Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good
waterproof/mildew proof /airtight and environmental property.
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.)
2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation - 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility Â40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface.
Good compatibility with various cables.
Wide application temperature range.
Excellent performance in weather resistance, waterproof sealing and anti-aging.
pplications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
