The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)
Used Rails shall be considered free of alloys when the residual alloying elements do not exceed
Cut to 1.5 meter length (standard)
1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
Standard: JIS ASTM DIN EN ISO
Diameter
0.1-5mm/custom
Length
custom
Surface
mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc
Application
Building, industry etc
Payment Terms
30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight
Delivery time
5-15 days after receiving L/C or deposit
Remark
Specific requirement of alloy grade,temper or specification can be discussed at your request
We Are a Wholesale Supplier and Exporter of copper wire scrap 99.97%
Feature highlights: High-purity99.9% red copper wire scrap with excellent tensile strength (up to 1000Nmm) and versatile wire gauges (0.2mm-3.5mm). Suitable for electrical, machinery, and defense industries.Complies with strict chemical composition standards, ensuring reliable quality and recyclability.
pecifications:
Copper wire scrap, (Millberry) 99.99% at a purity of 99.98% min and 99.99% max
Copper: 99.9%
Carbon: 0.03%
Coblet: <0.001
Iron: 0.005%
Phosphorus: <0.01%
Sulfur: <0.01%
Zinc: 0.003%
Copper wire scrap:
Wire diameter: 0.20mm, 0.25mm, 0.30mm
Weight: 3kg, 5kg, 7kg, 15kg, 20kg
Purity:99.9% min
Packaging Details:50kg per bale , 1000kg per bundle ,or Customer Specific Requirements.
Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.
The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
Aluminum content 75%, 95% 99.7% 99.9%
1.Aluminum wire scrap
2.Reasonable price and high purity
3.Timely delivery and promptly shipping
Density: 2.702g/cm�³
Melting point: 660.37�ºC
Boiling point: 2467.0�ºC
Color: silver white
Aluminum scrap 6063
Aluminum profile scrap 6063
Aluminum scrap UBC
The high recovery rate scrap aluminium wire with promotional price
(1). Item: Aluminium scrap
(2). Easy control and operation
(3). Fast melting
(4). Discontinuous melting with scrap
(5). High efficiency
(6). Stable working structure
1. Berry copper wire scrap conforming to ISRI standards/specs.
2. Minimum order quantity: 200 Metric tons. The seller can offer 1000MT - 2000MT per month / per shipment on a long term basis ( for quantities greater than the above mentioned, please write to us in detail )
3. Origin of scrap wire ( either S.A / Europe / Russia ) seller's option.
4. SOP: Letter of Intent with Bank Confirmation letter from the Buyer (trading companies). If the buyer-importer is end-user/consumer, BCL is not required but due to manufacturing licence/end products' details and other information as required before the execution of a contract.
5. Price $5500pmt CFR one safe port
6. Delivery/shipment - shall be provided after the receipt of LoI with BCL and due diligence.
7. Payment terms by Irrevocable, confirmed Letter of credit from first-class/internationally recognized bank
