Acetic Silicone Sealant is a 100% silicone sealant,It has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component Silicone Sealant forms strong cohesive bonds to glass without the need of primers.The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
INSTRUCTIONS
l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft,
l Joint width/depth ratio should be 2:1 (Table 1),
l If necessary, use back up material to adjust joint depth,
l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate.
STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C
905N a neutral cure, premium performance silicone sealant designed for gap filling and sealing in a wide range of use in building and construction. It combines the advantages of outstanding adhesion to building materials and non-corrosive and odorless
100% solventless silicone.
Excellent weatherproof and UV resistant.
No Cracking or Shrinking,Water resistant.
Very low odor and noncorrosive.
Excellent flexibility and adhesion to numerous porous and non-porous.
Substrates for large scale construction and glazing applications.
Resistant to temperature extremes (-60 C to +180 C)
Fast curing, low modulus, high elasticity.
High viscosity non slump formula.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
Shandong Factory Supply Neutral Weatherproof Silicone Sealant
Product Description
Material preparation:
For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air.
DO NOT clean glass with soap and water solutions.
Soap residue can cat as a release agent and result in adhesion failure.
Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure.
Application:
1. Glass must be properly prepared as described.
2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium.
3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass.
Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate.
Repair application:
The SINOLINK Aquarium Silicone Sealant can be used to repair old or damaged aquariums.
1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suirable solvent.
Spply sealant as described above and tool.
2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let it for several days and check for any signs or leakage.
SINOLINK hot sale white structural mp1 silicone sealant gun prices
Product Specification
