[ CHARACTERISTICS ]
Accurate heat consumed under heat load is measureable
* Display of various information : Heating energy / cooling energy Instantaneous heat and accumulated quantity, temperature , instantaneous flow rate, accumulated flow rate, etc. â?¢ Easy data transfer function through MODBUS RS 485
[ SPECIFICATIONS ]
* Display
- DC Type : Touch Screen Color Graphic LCD
- AC Type : 2 X 20 Characteristic LCD with El Backlight or VFD
* Temperature
- Operating temperature: 0 ~ 60 â??â??
- Storage temperature: 25 ~ 70
* Power : 85 ~ 264 V AC / 12 V DC
* Case dimension : (W) 150 mm X (H) 180 mm X (D) 50 mm
* Input
- Frequency Range: 0 Hz to 5 kHz / K factor Range: 0.0001 to 50,000.000 (Pulse / Units)
- RTD Signal Type: Open Collector, Voltage or Current Pulse
* Output
- Analog Function: 4 ~ 20 mA calorific output / accuracy: 0.1%
- Pulse Output #1 (Energy Total) Output: Open Collector transistor will sink 50 mA max
- Pulse Output #2 (Flow Total) Pulse width: 5 ms , 10 ms , 100 ms , 200 ms
* Communication
- Kinds RS 485 MODBUS
- Baud Rate 1200 ~ 19,200 BPS
- ID code 4 Multi Point communication, specific address programmable
* Display unit
- Energy kWh, J , cal , BTU
- Volume m3, L
* Data logging
- Logging interval : Day, hour and second can be set
- Logging information : Volume Total, Volume Rate, Energy Total, Energy Rate, Temperature, Date & Time
- Internal memory 12 months (Logging interval: 1 minute storage, 1 year storage)
For more details on quality Korean flowmeters, please feel free to visit
[ CHARACTERISTICS ]
Various inputs such as flow meters and pressure gauges.
Real time communication through Modbus, BlueTooth , etc. 2G Data logging
â?¢ Convert MODBUS or RS232 input to HART Item
[ SPECIFICATIONS ]
* Display 3.5 inch (320 x 240) Touch Screen Color Graphic LCD
* Power : 90 ~ 240 V AC (Free Volt)
* Output : RS 232 ASC DATA, HART Communication, RS485 MODBUS, 4~20 mA Output(24bit) of Flow Rate, MODBUS TCP/IP Ethernet(LAN), BlueTooth Wireless, 2 GB Memory, Memory Data Download USB Memory, Total Pulse Output(TTL), DC 24 V Power (0.6 A)
* Input : RS 232 ASC DATA, HART Communication RS 485 MODBUS Communication 4 ~ 20 mA
* Protection class : IP 65
* Piping pressure input 24 V DC pressure gauge drive and display
* Size : (W) 150 mm X (H) 180 mm X (D) 50 mm
Low flow flowmeter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display together with electrical instrument can achieve remote only instantaneous flow or accumulated flow.
The low flow flowmeter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum.
Model Flow range Connection
CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread
CX-M3-SS/AL 1-300 ml/min G1/8 female thread
CX-M5-SS/AL 5-1000 ml/min G1/8 female thread
CX-M6-SS/AL 0.5-100 l/H G1/4 female thread
CX-M9-SS/AL 5-550 l/H G1/4 female thread
CX-M12-SS/AL 1~30 L/min G1/2 female thread
CX-M25-SS/AL 5-110 l/min G1 female thread
CX-M40-SS/AL 10-250L/min G1 1/2 female thread
CX-M50-SS/AL 10-500L/min G2 female thread
select the low flow flowmeter and jsn WE will provide the professional service for you.
Main features
A. Single chip technology, powerful function, high accuracy.
B. Lithium battery for energy source, as long as two years or longer.
C. Instant flow and total flow are easily showed on the screen, and all the data will be remembered for more than ten years though the product powered off.
D. Simple structure, easy installation, operation and maintenance. And password protection.
E. Data is amended automatically and high accuracy.
F. Clear in reading, simple operation and maintenance.
G. Explosion-proof.
The measurement will not be affected by the density, viscosity, temperature and pressure of the fluid. This item could work smoothly under the temperature of -20¡æ~+250¡æ. Pulse and analog signal can be choose, which could well operate with the computer system.
DMF Mass Flowmeter is mainly used in food industry (dairy product, liquor, drink, syrup, chocolate, cooking oil), chemical industry (olefin, light olefin, naphtha and diesel oil, arene, LPG), fine chemical industry (salt chemical industry, resin industry, chemical additives), pharmaceuticals industry (material producing, testing), logistics industry (all kinds of chemical material, oil)
1. Main Technology Parameters
/cm3 Repeatability: 0.10%
Signal output: 4~20mA load resistor £¼ 500¦¸ (real-time flow rate or density )
0~10 KHz real-time flow pulse signal
485 communication signal
Sensor explosion-proof grade: Exib(ib)IIBT2~T5
Transmitter explosion-proof grade: Exib(ib)ibI BT5
Lde electronic magnetic flowmeter is mainly used in oil, chemical industry, metallurgy and other fields. And it can be measure the liquid which conductivity is equal or greater than 5us/cm. There is no moving parts or loss of pressure in the close tube and the measurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the liquid. The lining and electrode materials are manufactured with good corrosion resistance and abrasion resistance. Adopt a novel way of excitation. Low power consumption; stable zero point and high accuracy. This kind of item is applicable for industries like oil, chemical, power supply, textile, food, paper making, environmental protection, water conservancy construction, especially the field of sewage treatment.
Individual in polybags, inner plastic boxes, out plywood cartons(wood cartons), any special required packings can be specified as well(customization).
SL1168 Ultrasonic Flowmeter
Specifications:
Accuracy: +/-1.0% of reading from 0.03 to 16fts (0.01 to 5m/s)
Repeatability: +/-0.3% of reading
Wide turndown ratio
Bi-directional flow range of 0.03 to 16 ft/s (0.01 to 5m/s)
Pipe sizes from 1 to 48 inches (25 to 1200mm)
Process pipe-wall temperature: 32 to140 (0 to 60)
Power supply: 10 to 24 V AC or 10 to 36 V DC at 1A
Output signals: 4-20mA
Pulse (configurable)
Relay (configurable)
Digital communications: RS-232, RS-485, Modbus RTU
RBEF Tri-clamp Sanitary type electromagnetic flowmeter especially designed for the food & beverage and pharmaceutical industries and is available with hygienic and flexible process connections. It ideals for conductive liquids. It comes in sizes from 15mm to 200 mm.
The RBEF Sanitary type electromagnetic flowmeter (EMF) is widely used for is ideal for the food and beverage industries, such as drink water, milk, beer, food & beverage juice filling machine and many other industrial fluid. Itâ??s body and connections are polished 304SS.
