ZY-JKFZ-EIM100/0 Omnidirectional Jammer adopts omnidirectional antenna combination to block and interfere with the reception and processing of UAV's figure transmission, remote control and navigation signals within a range of 360, so as to achieve countermeasures such as forced course reversal, forced landing and drive away, so as to quickly and effectively dispose suspicious UAV.
1. For anti-UAV, forced landing and drive mode are adopted
2. Manual \ automatic adjustment of strike frequency band and power
3. Flexible customized interference mode, automatic start and stop
4. The electronic map shows the working status and strike area in real time
5. Guided by UAV radar, UAV Radio Monitoring Equipment, Optoelectronic Device and other equipment
6. Equipment self-check, abnormal report
7. Standard interfaces and protocols for secondary development components
Product Parameters
Interference intervention distance: 0.6km1km
Control pitch Angle: 16
Azimuth coverage (horizontal): 360
Interference beam width: 1550~1620MHz; 2400~2485MHz; 5720~5870MHz(Other frequency bands can be customized)
Antenna gain: 1550~1620MHz 6Db; 2400~2485MHz 5720~5870MHz 8db
Interference time: 1s
Interference type: Narrow band noise interference, broadband noise interference, frequency sweep noise interference
Control interface: Network/serial port
Weight: 20Kg (standard frequency band)
Power supply: AC220V/50Hz
Equipment power: 950W (All frequencies)
Physical Features
Working Temperature: -30-55
Storage Temperature: -40~60
General Specification
Dimensions (LWH): 480mm155mm340mm
Protection grade: IP66
1.Multi-band and all-band scanning to detect drones
2.Support urban mode, suburban mode, base station mode and other complex environment application mode
3.Interference linkage
4.Create a black and white list identifying WIFI type drones
5.Passive detection, GPS positioning, automatic north calibration, unattended
6.Equipment self-inspection, historical data return visit
7.No high-power electromagnetic radiation in the system. Strong concealment. No interference to environment and human body
8.Small and light, suitable for portable
Product Description
ZY-JKFZ-RAD001 UAV Radio Monitoring Equipment can realize real-time search, detection and alarm for UAV data transmission and measurement and control signals, and has parameters for UAV data transmission and measurement and control signals.
This radio frequency drone detection has the functions of measurement, single-station direction finding and rough ranging. Combined with the identification database, it can identify the model of UAV and the manufacturer. At the same time, this drone detection device can also locate and continuously track the UAV, and display its position and track in real time on the map.
ZY-JKFZ-3010A UAV Radio Monitoring Equipment is composed of passive detection antenna array, signal processing equipment and control terminal which can implement automatic real-time passive, no dead angle, zero interference detection and advance warning. According to different equipment hardware and software configuration, there are 4 product series with detection distance not less than 500m\2km \5km\9km provided, and the detection distance of network can be extended indefinitely. Furthermore it has been added new Al intelligent algorithm with unknown UAV detection capability.
ZY-JKFZ-2000C portable reconnaissance and strike integrated system adopts a body, miniaturized design consisting of the antenna array, signal processing equipment, control terminal and so on. Including automatic real-time passive detection, no dead Angle, zero interference detection, early warning, accurate identification, identification of friend and foe, it also can identify the only electronic fingerprint of the same brand and model UAV. Using narrow band and low power for precise strike, it can carry out omnibearing defense and take over multiple UAVs. Furthermore, it can be easy to carry and fast to deploy.
Product Parameters
Frequency range 70MHz~6000MHz
Reconnaissance distance. 3km
Strike distance.... 1.5km
Reconnaissance sensitivityover -95dbm (25kHz)
Reconnaissance airspace.... 360°the whole airspace
Power supply.. power, oil generator, battery
Built-in battery life....4 hours
Operating temperature.. -40°C~+70°
Dimension... 57cm X 25cm X35cm
Product Description
ZY-JKFZ-2000A fixed reconnaissance strike integrated system consists of antenna array, information processing equipment, commanding terminal and so on. It is capable of automatic real-time passive detection, no dead Angle, zero interference detection, early warning, accurate identification, and identification of friend and foe, and can identify the only electronic fingerprint of the same brand and model UAV. Adopting narrow band and low power for precise strike, it can fully defend and take over multiple UAVs.
Product Parameters
Frequency range 70MHz~6000MHz
Reconnaissance distance. 9km/5km/3km
Strike distance.... 3km/2km
Reconnaissance sensitivityover -95dbm (25kHz)
Reconnaissance airspace.... 360°the whole airspace
Protection class.. IP65
Connection mode... wired connection (network or optical cable)
Operating temperature.. -40°C~+70°
Power supply.. C12V
Dimension... 42cm X 18cm X 46cm
Supplier: Industrial safety (ppe), height safety, fire detection & protection system, gas detection system and building management system (bms) product.
RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.!
Features & Benefits:
1. Designed for sprinkler standards NFPA 13, 15 and 16.
2. Dual hazard operation.
3. Cross-zone (double-interlock) capability.
4. Six programmable Style B (Class B) IDCs (Initiating Device Circuit).
5. Optional Digital Alarm Communicators
RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing.
Features & Benefits:
Disable/Enable control per input zone and output zone.
Extensive transient protection.
Dual hazard operation
Meets International Building Code (IBC) seismic requirements
The Notifier NBG-12 Series Pull Station is a fire alarm initiation device that allows manual activation of the fire alarm system. It typically consists of a red or yellow manual-pull handle or lever, which when activated, sends a signal to the fire alarm control panel to initiate an alarm. The NBG-12 series is designed for use in fire alarm systems and is commonly used in commercial, industrial, and residential buildings. The product is known for its durability and reliability, and it meets industry standards for fire alarm systems.
