XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations.
B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
Polyurethane pir/pur/pu foam insulated sandwich panel for cold room/warehouse/workshop
1.Our PU sandwich panel has the following characteristics: light dead weight, high mechanical strength, excellent shearing resistant performance, strong corrosion resistance, high durability, and weather fastness, etc.
2. The sandwich panel has excellent insulating performance: heat insulation, sound insulation, waterproof performance, etc.
3. It is easy to install and can be used many times over.
4. Nowadays, the PU sandwich panel is widely used for cleaning workshops, industrial factory buildings, office buildings, stadiums, villas, and public buildings, etc.
Model: X150
Thermal Conductivity W/(m.K):0.028
Compressive strength (kPa): 200
Nominal Density (kg/m3): 26-28
Fire behavior: Class C
Oxygen Index (%): 27.4
Applicable temperature: 227;C
Size (mm): 1200*600*50
Surface: Smooth planing
Edge: Flat
Key Features:
1; Able to resist repeated freeze/thaw cycles
2; High density, tough and durable, not easily damaged
3; Dimensionally stable, cryogenic secondary foaming
4; Flame-retarded, light weight, thermal bridge breaker, easy to install
5; ECO, ODP, GWP: zero Ozone Depletion Potential, low global warming potential, the 1st manufacturer which uses CO₂ foaming technology in China, each piece of insulation board dedicates love for global environmental protection causes.
Application: Insulation & Energy-saving for roof, floor and walls.
Compressive strength (kPa): 250
Nominal Density (kg/m3): 31-32
Fire behavior: Class E
Oxygen Index (%): 27-33
Applicable temperature: Minus 50¡ãC-Positive 75¡ãC
Max. Size (mm): 2400*1200*150
Surface: Smooth planing, embossing & slotting, peel removal
Edge: Flat, lap joint, tenon, rain gutter
Key Features:
Ø Able to resist repeated freeze/thaw cycles.
Ø High density, tough and durable, not easily damaged.
Ø Dimensionally stable, cryogenic secondary foaming.
Ø Flame-retarded, light weight, thermal bridge breaker, easy to install.
Ø ECO, ODP, GWP: zero Ozone Depletion Potential, low global warming potential, the 1st manufacturer which uses CO₂ foaming technology in China, each piece of insulation board dedicates love for global environmental protection causes.
Application: Heat preservation & insulation for building, floors, parking platforms, and other moisture-proof insulation etc.
Detailed introduction to XPS Board-X300:
Our Corporation introduces the most advanced automated production lines all over the world. The computer pre-stores thousands of process parameters, equipped with full automatic control of various processes, automatic fault inspections and diagnosis closed recycled material processing system, various plate on-line automatic control and adjustment, the programs above are under network control by three country expert groups, which solves the quality non-stability phenomenon caused excess operators.
Properties:
Model: X300
Thermal Conductivity W/(m.K): 0.023-0.028.
Compressive strength (kPa): 300.
Nominal Density (kg/m3): 32-35.
Fire behavior: Class E.
Oxygen Index (%): 27-33.
Applicable temperature: Minus 50¡ãC-Positive 75¡ãC
Max. Size (mm): 2400*1200*150.
Surface: Smooth planing, embossing & slotting, peel removal.
Edge: Flat, lap joint, tenon, rain gutter.
Application: Heat preservation & insulation for building, floors, parking platforms, and other moisture-proof insulation etc.
Key Features:
Ø Able to resist repeated freeze/thaw cycles.
Ø High density, tough and durable, not easily damaged.
Ø Dimensionally stable, cryogenic secondary foaming.
Ø Flame-retarded, light weight, thermal bridge breaker, easy to install.
Ø ECO, ODP, GWP: zero Ozone Depletion Potential, low global warming potential, the 1st manufacturer which uses CO₂ foaming technology in China, each piece of insulation board dedicates love for global environmental protection causes.
