Please quote for the following wholesale product requirement -
Product Name: Metal Working Machine Like Hardbanding Unit
Specifications :
• All steel skid fabrication approximately 6’ long x 4’ Wide x 7’ High Collapsed with open operator area.
• Unit weighs approximately 3300# as shipped.
• Unit has adjustable, pin able stiff legs with pinch bolts that adjust to pipe rack height.
• Unit has four each Hydraulic powered drum rollers to rotate from 3 ½” O.D. Drill pipe to 10” O.D. Collars, As well as center wear pad on Hevi Wate Drill Pipe.
• Drum Rollers are 6” O.D. x 8” Long. Two below pipe and two above pipe applied with hydraulic pressure.
• Hydraulic conveying system to move pipe in/out of grinding area, mounted on moveable exterior jack.
• Two exterior jacks with 750lbs ball transfer rollers.
• One jack is used with hydraulic conveying system to move Drill pipe from racks to and from the machines grinding area.
• The other jack is used behind machine for center wear pad on Hevi Wate Drill Pipe.
• All Hydraulic jack cylinders have 12” stroke with adjustable legs.
• Hydraulic tank is 35 gallons, 6 gpm @ 1000 psi with heat exchanging fan and radiator.
• Grinder:
- 14” O.D X 3 ¼ wide or 14” OD X 1 1/2” wide Grinding Wheel.
- Grinding wheel moves up and down 14” and 12” left to right.
- Grinding Wheel can tilt hydraulically for 18-degree area repair.
• Unit is electric over hydraulic powered,460-volt 3ph 60 hertz or customers shop power.
• All operational controls are at operator’s fingertips
The buyer is interested to receive quotations for the following RFQ -
Product Name: Metal Engraving Marking Machinery
Specifications:
Name: Pneumatic engraving machine
Marking Speed: 30-40mm/s
Marking Depth: 0.1-2mm (depends on the different materials)
Marking Area (mm): up to 300mm x 200mm
Up and down lifting height: 0~300mm
Material hard request: Below HRC60
Whole machine power: 500W
Power supply: AC100V- 240V 50Hz/60Hz
Airpower: 0.3~0.6MPa
Marking Type: Pin Making Machine
Condition: New
