Supplier : Roll forming machine, c purlin roll forming machine, c and z purlin roll forming machine, light steel keel roll forming , garage door forming machine, simple slittiing line, sandwich shutter door forming machine, door frame machine, shutter sliding machine, hydraulic decoiler, highway guardrail roll forming machine, floor deck roll forming machine, down pipe roll forming machine
Established: 1995
Standards: ISO9000, CE
Verification Status
Contact Details:
Zhenggang Road, Economic Development Zone
Botou
062150
Hebei
China
C60*27/U27*28 This profile is very popular and usual.
Our machine have high precision, the cutter is tracking, when cutting, the machine will not stop. It is full-automatic.
(1)Plate Material: Galvanized plate
(2)Thickness of the plate : 1.5-3.0mm
(3) Machine body : 400mm H steel
(4)Wall thickness of the main forming machine: 18mm steel plate
(5)Transmission chain : 2
(6) Reducer :11kw Xingxing Cycloid which works stably and no noise.
(7) Seam type semi-mat
(8) Roller material: 9 Cr-Si with quenched treatment 62-64
(9) Rollers: 12 steps for moldind and 9 steps for leveling, 1 pair steps on the middle for adjusting machine height, 1 pair steps on the coil-output part for adjusting deviation and 1 step for straightening
(10) 4 steps side wheels on the coil-input part for avoiding coil-deviation
(11) Diameter of active shaft: 65mm, 45# steel
(12) Hydraulic pump power: 5KW
(13) PLC control systerm with inverter
(14) Dimensions of major structure: 7.6(length)*1.0(width)*1.2m(height)
(15) Woking Speed: 8-12m/min
NO. Composing of product line:
1 Uncoiler (hydraulic and automatic ) with loading car
2 Steel sheet transverse cutting deviceã??steel sheet surface PVC film covering device
3 Roll forming machine
4 EPS slab feeding belt system
The device for cutting the EPS trapeziform strip
5 PU Liquid glue mixing and scraping device for foaming
6 Laminating press and sandwich panel agglutinating and maturing in the machine(Caterpillar structure)
7 Panel automatically cutting system with band saw
8 Automatic stack system and packing machine
9 Electric control system
Stone coated metal roofing production line
Colorful stone-coated metal roof tile is a modern environmentally friendly
roofing material with the basic of 0.4mm Al-zine coated steel.
Covering color vermiculite surface which carried under the high temperature
technology.
It is high-performance, stable, energy-efficient and easy operation.
Technical parameters of roll forming machine
1 Main moter power: 3KW
2 The number of roller: 5
3 Diameter of principal axis: 70MM
4 Material of roller: 45#steel hard chrome plating
5 Processing speed: 6m/min
6 Installation dimension about(L*W*H): 1.05*1*1.6M
7 Total weight: 1.08 T
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
