Cv.Diprintz

Printer compatibility:

Seiko Colorpainter W-54s / Colorpainter W-64s



This Seiko Print Head Body IRH3223T is suitable and exclusive for Seiko Colorpainter W-54s / W-64s printers. This advanced industrial piezo printhead, designed for longevity and high-volume printing environments, has 254 nozzles (in a non-wetting nozzle plate), a built-in damper and supports 3 different droplet sizes . It has a 36mm print width and fires at frequencies of 36, 26 and 18 kHz. This is the original Seiko part (number 61562062 replacing number U00122416700). Note that this new head 61562062 is different from the old head body U00122416700 with an extra protection plate on the nozzle area that increase the printhead lifespan. The old head U00122416700 is not available anymore and it was discontinued. The new head 61562062 works with a new wiper (part number U00129167800). This new wiper is compatible with the old head U00122416700 but the old wiper is not compatible with the new head.

Printer compatibility:

Roland PC12



Roland PC60 original, water-based print head suitable for Roland PC12 printers. This is the original Roland water based printhead, delivered in a sealed Roland original package.


selling all types of printer machine tools.

Some of the sampel in this catalogue are artificial renderings
Specification, design and dimensions started in this catalogue may be subject to change without prior notice ( for technical improvements, etc)

selling all types of printer machine tools.

Printer compatibility:

Oce Arizona 200 GT / Arizona 250 GT, Fujifilm Acuity Advance HD2504



This original Océ Arizona print head is suitable for Arizona 200 GT / Arizona 250 GT and Fujifilm Acuity Advance HD2504 printers. Unlike conventional binary printheads, this grayscale printhead technology of jetting multiple drops within one dot allows for an image to have 8 level grayscale, since each dot is created through a minimum of 6 pl to a maximum of 42 pl of ink. This enables the image to express near photo quality. Revolutionary single passspeed quality priting is achievable with its unique precise piezo process and driving technologies, offering accurate dot placement and jetting reliability. Compatibility with both UV curable and oil based pigment ink allows printing on various types of substrate, both porous and non-porous. The Oce Arizona printhead is a packaged printhead with chassis which provides built-in water channel and complete sealing designed for easy temperature control. This head is the original Océ printhead (part number 3010106120) and it comes fitted in the metal frame. This printhead carries a product warranty.

Specifications
- Technology: Micro-Piezo
- Native resolution: 1440 dpi
- Min. Droplet Size: 1,5 pico litre
- Max. Droplet Size: 21 pico litre
- Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles)
- Firing Frequency: 8 kHz
- Ink Compatibility: water-based dye and pigment inks

Printer compatibility:

Anajet FP-125, Epson Stylus Pro 4400, Graphics One GO Salsa 64 / GO Salsa TX / GO Salsa TX100, Myjet MW1601EP5, Robustelli Monna Lisa 160 TM12 / Monna Lisa 180 TM12 / Monna Lisa 160 HT12 / Monna Lisa 180 HT12 / Monna Lisa 320 TM12 / Monna Lisa 320 HT12, Yuhan Kimberly Ujet MC3



The Epson DX5 water-based print head is used by different printer series as described in the printer compatibility. The Epson DX5 (Epson fifth generation micro-piezo print head) has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
The Epson DX5 is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1,5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the Epson DX5 Print Head is 8 kHz.
It is a new generation print head that allows fast speed, high resolution printing with water-based dye and pigment inks. The Epson DX5 original print head is delivered in a sealed Epson package.

Specifications

Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)
Native Resolution: 360 dpi
Cal. Droplet Size: 14 pico litre
Max. Drops in Greyscale: 8 drops
Tot. Amount of Nozzles: 1024 (512 nozzles per line)
Nozzle Spacing: 70.5 microns
Print Width: 72 mm
Firing Frequency: 12.8 kHz
Ink Compatibility: Oil Based and Solvent Inks
Heater: not integrated
Printer compatibility:

Agfa :Anapurna M1600 / :Anapurna M² / :Anapurna M2050 / :Anapurna M2540 FB , Allwin C8



The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 MNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.

4 Ink Tanks & 4 Cartridges
Incomparable savings on printing cost.
Reliable and stable operation from start to end.
Easy installation and replacement of ink bags.
Permanent and one time chips available.
1 Liter or 2 Liter ink bag bulk system.
More stable Ink flowing in a clean environment.
No mess.
Supported ink types: Hard Solvent, Mild Solvent, Eco-Solvent, Water-Based, Dye Sublimation and Reactive (optional UV).
Compatible Printers No
OEM Product Number No
STS Product Number CISS.4X4
Cartridge Capacity No
Ink Color N/A
ink Type No
Printer Brand Mimaki, Mutoh, Roland
Note No

4 x 8 High Capacity Ink System for Mimaki, Roland and Mutoh Printers

4 Ink Tanks & 8 Cartridges
Incomparable savings on printing cost.
Reliable and stable operation from start to end.
Easy installation and replacement of ink bags.
Permanent and one time chips available.
1 Liter or 2 Liter ink bag bulk system.
More stable Ink flowing in a clean environment.
No mess.
Supported ink types: Hard Solvent, Mild Solvent, Eco-Solvent, Water-Based, Dye Sublimation and Reactive (optional UV).