1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives.
2. Typical recipes
Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde.
3. Application scope
A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc.
B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent.
Free samples
4. Storage and packaging
A. All emulsions/additives are water-based and there is no risk of explosion when transported.
B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels.
C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use.
D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives.
2. Typical recipes
Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�??�?�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde.
3. Application scope
A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc.
B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent.
Free samples
4. Storage and packaging
A. All emulsions/additives are water-based and there is no risk of explosion when transported.
B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels.
C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use.
D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
Water undissolved substance(%): Minim
Butanol undissolved substance(%): Minim
3. Usage:
Its polymer or co-polymer can be used as flocculant, mud conditioner, blocking agent, mineral dressing agent, textile treatment agent, intensifier and water treatment agent.
Most acrylamide is used to synthesize polyacrylamides, which find many uses as water-soluble thickeners. These include use in wastewater treatment, gel electrophoresis (sds-page), papermaking, ore processing, and the manufacture of permanent press fabrics. Some acrylamide is used in the manufacture of dyes and the manufacture of other monomers.
4. Product package
The flocculant is packed in 25 kg paper plastic three-in-one compound woven bags, or according to users¡¡¥ requirement; its shelf life is 2 years.
item index
appearance white crystal
acrylamide% 98.0
moisture% 0.7
iron ion(PPM) no
polymerization inhibitor(PPM) 15
40% solvent PH range 7-8
40% solvent specific conductanceUS/CM5
ethyl alcohol insoluble substance no
Package:25kgs/kraft paper bag with plastic inner,
16.5mt for 1x20 feet container.
Overview:
Acrylamide is a white crystalline solid used as a monomer for producing polyacrylamide. It is essential in water treatment, mining, and laboratory applications.
Properties:
Molecular Formula: CHNO
Appearance: White crystals
Solubility: Highly soluble in water
Applications:
Water treatment: Produces flocculants.
Mining: Aids in solid-liquid separation.
Labs: Used in gel electrophoresis.
Safety:
Handle with care due to potential toxicity. Store in a cool, dry place.
Polyacrylamide, abbr. PAM, is a kind of water soluble polymer, has unique effect to increase the viscosity of water or to promote the flocculation of particles present in water, it can also reduce the frictional resistance between the liquid.
According to the different ion characteristics, PAM has three types:Anionic PAM,Cationic PAM and Nonionic PAM
It is widely used in many fileds like Water Treatment, Oil Exploration, Sludge Dewatering, Paper Making, Textile, Sugar Making, Coal washing and Incense Making, etc.
Appearance: White to off-white Crystalline Granular.
Solubility: Soluble in water, insoluble in most organic solvents.
Molecular Formula: CONH2[CH2-CH]n
CAS NO.: 9003-5-8
Mesh size: 20-80mesh
Quick Details
INCI Name:ACRYLAMIDOPROPYLTRIMONIUM CHLORIDE/ ACRYLAMIDE COPOLYMER
Appearance: White to yellowish solid
Content of active matter 99% Min.
Viscosity (250C, CPS) 2000-5500
Benefits:
- Curl retention
- Frizz control
- Improve style durability
- Improve slip and lubricity of hair
- Improve foam stabilization
General Information:
SC60A is a cationic high molecular polymer with strong Adhesion (molecular weight: 1.5-6 million). It possesses detangling, softening and good spreading properties.
This ingredient offers characteristics such as reduced combing force on both wet and dry hair, slip and lubricity, substantivity and foam stabilization. It can be mixed with nonionic, cationic rubber powder K90 K30, and gel products, imparting a smooth touch and does not feel sticky.
Packing&Handling
Standard Packing:Â 25kg /box
Life Span 24 months
Store in dry and cool place, keep away from sunshine and rain.
