NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : ???18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
Shearhead Connectors
shearbolt connectors are a reliable and cost effective way of connecting different conductor sizes and types.
manufactured and certified in Europe from high strength aluminium alloy and using shearbolt technology, they are
available as both a lug and a link in 1KV and up to 36KV options.
shearbolt connectors minimize inventory and can save downtime in the event of cable outages.
they are quick and easy to use, provide optimal cable clamping and can be used on both copper and aluminium conductors.
hot-dipped galvanized bolt & nut and cable fitting with well-equipped testing equipment and strong technical force.
With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in the area of electrical power industry, esp. in mounting of overhead power line.
The PGC is used for all non tension aluminum to aluminum cable. PGC-10/95 is equipped with two M8 shear head bolts. Use 13mm spanner to screw the torque nuts until they shear off
split bolt SB series
It is used to branch or connect aerial hard copper conductor or insulated copper conductor.
Material: Brass
Surface treatment: Tin plated or copper plated on request
Product Property: It is used to branch or connect aerial hard copper conductor or insulated copper conductor.
JCD type electric meter box clamp is made from a special aluminum alloy material, conductive performance is very strong, both for the aluminum wire, and is suitable for copper wire and copper aluminum transitton wire. Mainly used in the connection into householods bus and electric meter box holding the line, with a head into households bus connection, through the hinge wedge wire pressing, using C type structure of the body, can keep the guide constant contact pressure line.
Suspension clamps are used to hang conductor or ground wire through insulators of link fitting to tower arms of substation structures The clamps are made of malleable iron or alummium alloy
The meaning of letter & arabic figures in the catalog are shown as follow
Xsuspension clamp Gfixed Sdolble clamp UU bolt Jstrength Halunimium Fcorona control K unde r axletype T envelopetype A with a socket clevis B with U clevis C hartg downtype
The suspension angleof suspension clampsis not less than 25??C the radius of curvature is not less than the dia of installed leaded by 8-10,and the percentage of the grip on different kinds of leads to calculating capabilltyof snap show in following table
ADSS Accessories Simple Guy End Grip
Specifications
Simple Guy End Grip
1.ADSS preformed tension clamp is used for cable route's fixing & anchor shackling.
2.Installed on the terminal tower, tight tension tower and intersection angle tower etc.tension cable clamp
3. Compared with the traditional fittings with uniform force, no stress concentration and good vibration performance.
4. Perfect corrosion resistance: because the material is HOt dip galvanized steel wire or Aluminium clad steel.
5. Easy installation: One man does not need any special tools to complete the installation. tension cable clamp
