Lakdek Sandwich Panel is a self supporting metal panel insulated with EPS for roofing, and walling to be used in industrial, commercial buildings and refrigerated rooms., The panel is coated with AZ100 Zinc Aluminium alloy for superior durability. The exterior, side is coated with 20 microns of regular polyester finish coat over 5 microns of, polyester primer.
Benefits of using Lakdek EPS Sandwich Panel
1. Long life and very low maintenance cost.
2. Good sound insulation.
3. High load bearing capacity at low weight.
4. Excellent and durable thermal insulation.
5. Absolute water and vapour barrier.
6. Easy repair and replacement in case of damage.
7. Easy and speed of installation.
8. Excellent air tightness and free of thermal bridges
which result in considerable energy savings.
EPS Sandwich Panel Specification
Zn/Al Sheet Thickness - 0.3mm – 0.6mm
Core Materials - 50mm – 250mm
Effective Width (Cladding) - 950mm – 1150mm
Effective Length - By customized
For walls, fascias, fences, awnings and gates. Lakdek Cladding is available in customized lengths.
Product Specifications
Feeding Width - 1000mm Effective Cover Width - 900mm
Rib Height - 15mm Tensile Strength - G550
Coating Class - AZ 150
Recommended Total Coated Thickness -
0.47mm, 0.40mm and 0.35mm
Recommended Screw - Steel Frames - 12 x 25, 12 x 20
Material Specifications
Standards Code -
Material - 55% Aluminium, 43.4% Zinc, 1.6% Silicon alloy coated steel base
Tensile Strength - 550 N/mm2 (Grade 550) Hi-ten
350 N/mm2 (Grade 350) Soft
Coating Class - AZ 150 (150gms/m2 of Zinc Aluminium coating on base metal)
International Standard
AS1397
Australian Standard
ASTMB 117
Curve sheets are recommended for walkways, car parks, busstops, weather sheds and, a variety of commercial, industrial and domestic building applications. The curved, sheets also contribute to cost saving due to lesser supporting frame work for fascias, and roofs.
Product Specifications
Feeding Width - 1000mm
Effective Width - 840mm
Rib Height - 25mm
Tensile Strength - G550 (Hi-Ten) and G350 (Soft)
Coating Class - AZ 150
Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm
Recommended Screw - Steel Frames - 55mm
Timber Frames - 68mm
(Delta Coated Screws)
Lakdek Roll forming ridge cap ideally suitable for, Tile Roofs and corrugated roofs. Lakdek roll, forming ridge cap is available in non colour,, colour bonded and customized lengths.
The Tile Roofing is available in four profiles to the Company’s roofing range which is, neat and aesthetic, giving a streamlined and attractive perspective to any building. The, tile profile is ideal for Hip Roofs (Gable), Houses (Domestic), Hotels and any commercial, building requiring an elegant finish.
Product Specifications
Feeding Width - 1200mm
Effective Cover Width - 950mm
Rib Height - 30mm
Tensile Strength - G550 (Hi-Ten) and G350 (Soft)
Coating Class - AZ 150
Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm
Standard Tile Length - 10” (inches) orders for customized tile lengths are also accepted
Lakdek Roofing (3) of colour bonded, (Zinc Aluminium) Alloy Coated Roofing, and Cladding in Sri Lanka is suitable, for a wide range of heavy duty roofs., Lakdek Roofing (3) is ideally suited to, carry large volumes of water on roofs, with a pitch as low as 1° degree.
The, unique fastener system by using a roof, connector provides easier and faster, installation., Lakdek Roofing (3) is available in, fifteen attractive colours and could be, manufactured to customized lengths.
Product Specifications
Feeding Width - 1000mm
Effective Cover Width - 600mm
Rib Height - 88mm
Tensile Strength - G550
Coating Class - AZ 150
Recommended Total Coated Thickness -
0.35mm up to 1.20mm
