The machine can remove the water, gas and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. The machine is mainly used for electric power department and industries to deal with various oils such as transformer oil, mutual oil, switch oil, dielectric oil and so on. The machine is especially for purifying the insulation oil in all kinds of large power equipments that are above 110kv.
Feature:
1. This machine is high effective and portable, which is very suit to operate on line. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
2.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
3. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.
4. High absorption speed, absorption speed power more than 333l/sr.
5. Duplex 3d stereo-evaporation technology, eliminating the liquid water very effectively.
6. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effect.
7. Distinctive removing impurities technology filtering through double fh trapezoidal network and absorbing by high polymer without the mechanical power.
8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
9. The oil of any grades can be treated on line at the working site.
Advantage:
Comparing with the single-stage vacuum oil purifier, this machine dewaters, degases and removes impurities more quickly, more completely and make the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can filter and be an independent vacuum power supply, this machine can be vacuum treating the electric insulating devices.
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides and free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index including anti-oxides and acid- alkali water-solubility
2. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration
3. It can purify transformer oil on-line without cutting off the power
According to fieldwork requirement, this machine equips car wheels, which can be easily moved to any work point by traction. It is especially suitable for purifying transformer oil which locates in fields. This machine can seriously recover transformer oil. The treated transformer oil can reuse again in transformer
Application
SVP series efficiency single stage vacuum transformers insulation oil purifier can quickly and effectively remove water, gas, oxide materials, fee carbon and other impurities from transformer oil to lower the PH value, improve breakdown voltage and quality. Also serving as the vacuum oiling equipment and drying equipment, SVP vacuum transformer oil purifier adopts high vacuum oil dehydrator and degasification system and duplex-Stereo film evaporating technology for drying insulation oil and recover the dielectric strength. This vacuum insulation oil purification machine can live line work on the spot and also can be suitable to purify other insulating oils, such as capacitor oil, switch oil, mutual inductor oil, cable oil, circuit breaker oil and so on.
Features
1. Horizontal vacuum separation technology, high efficient separation of vacuum degassing, exponentially increase evaporation area, increase the retention time of the oil keep in the vacuum chamber, high efficient and reliable.
2. Radiant heating system, enhance the contact area of the oil and oil heater, reduce the surface temperature of the heater, put an end to oil cracking aging.
3. Fault protection, Heater protection, prevent heater dry, pressure protection, discharge fault alarm and motor alarm.
4. Vacuum pump front cooler, reduce the water into the vacuum pump, and reduce the frequency of replace the vacuum pump oil, extend the life of the vacuum pump.
5. Patent holder degassing tank "foam protection structure + two-way foam electronic monitoring system", to prevent vacuum pump oil injection.
6. Automatic oil floating ball and automatic oil level electronic control system, realize the man-machine separation
7. Using high pressure oil pump, put oil in/out through machine stability, low noise, long work life.
8. Stainless steel mesh filters, acid resistant and anti-corrosion, large filtration area, strong suction sewage capacity, high working efficiency.
Application
SVP series efficiency single stage vacuum transformers insulation oil purifier can quickly and effectively remove water, gas, oxide materials, fee carbon and other impurities from transformer oil to lower the PH value, improve breakdown voltage and quality. Also serving as the vacuum oiling equipment and drying equipment, SVP vacuum transformer oil purifier adopts high vacuum oil dehydrator and degasification system and duplex-Stereo film evaporating technology for drying insulation oil and recover the dielectric strength. This vacuum insulation oil purification machine can live line work on the spot and also can be suitable to purify other insulating oils, such as capacitor oil, switch oil, mutual inductor oil, cable oil, circuit breaker oil and so on.
Features
1. Horizontal vacuum separation technology, high efficient separation of vacuum degassing, exponentially increase evaporation area, increase the retention time of the oil keep in the vacuum chamber, high efficient and reliable.
2. Radiant heating system, enhance the contact area of the oil and oil heater, reduce the surface temperature of the heater, put an end to oil cracking aging.
3. Fault protection, Heater protection, prevent heater dry, pressure protection, discharge fault alarm and motor alarm.
4. Vacuum pump front cooler, reduce the water into the vacuum pump, and reduce the frequency of replace the vacuum pump oil, extend the life of the vacuum pump.
5. Patent holder degassing tank "foam protection structure + two-way foam electronic monitoring system", to prevent vacuum pump oil injection.
6. Automatic oil floating ball and automatic oil level electronic control system, realize the man-machine separation
7. Using high pressure oil pump, put oil in/out through machine stability, low noise, long work life.
8. Stainless steel mesh filters, acid resistant and anti-corrosion, large filtration area, strong suction sewage capacity, high working efficiency.
LV(lube oil purifier,oil filtration,oil purification,oil filtering,oil recycling,oil treatment,oil regeneration,oil reprocessing,oil filters)series is suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system
1.Scope of application
Lubricating oil, hydraulic oil, turbine oil, transformer oil, gear oil, cutting oil, cleaning oil, rolling oil, cooling oil, engine oil, guide rail oil, stamping oil, antirust oil, spark engine oil, phosphate oil, water glycol, etc.
2.Working principle
The oil purification device is a three-phase separation of particulate matter, oil, and water medium, and the sedimentation separation formed according to different densities, and the sedimentation is accelerated under the action of centrifugal force.Through the centrifuge, the sedimentation acceleration evolves into the circumferential acceleration. The separated material is sent into the heart of the machine, that is, inside the barrate. Under the action of strong centrifugal force, the material passes through the separation interval of a group of disc bundles. The disc wall moves out of the neutral hole, where heavy slag accumulates in the sediment area, and the heavy phase flows upward to the centripetal pump; the liquid with a smaller specific gravity moves along the disc wall into the neutral hole and converges to the lower centripetal pump The light and heavy phases are respectively output by the lower centripetal pump and the upper centripetal pump; the heavy slag is discharged regularly; continuous production is implemented.
3.Technical parameters
Model Number:LC-YJ-HWM-G
Scope of application:Oil-Based
Filtration Method:Centrifugal Separation
Slag Discharge Mode:Automatic Slag Discharge
Start Mode:Soft Start
Power Supply Data:Three Phase AC 38V 50Hz
Total Power (Kw):48
Control Panel:Siemens Touch Panel
Drum Capacity (L):20
Drum Speed (r/min):11600
Centrifugal Effect:99%
Working Pressure (Mpa):0.4
Working Noise:â?¤75 dB(A)
Maximum Handling Capacity:12000
Recommended Flow (L/H):6000~12000
Working Temperature For Oil ():45
Moisture after Processing (ppm):
Application
As composed of three-stage precise filtering, this machine is an ideal substitute of the board-frame oil purifier and the centrifugal oil purifier. It is also can serve as precise filtering and oiling.
Advantages
This oil purifier is equipped with three-stage purification, portable, easy to operate, very low price, no need of purification paper, no contamination to the ground.
The product can effectively purify the tiny and fine mechanical impurity min oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.
Crude Oil:
Bonny Light
REBCO
ESPO (Siberia Pacific Oil)
Basra Light
WTI
Southern Green Cayon Blend
Olmeca Mexican crude
Heavy Crude, etc.
Product Description :
Crude oil is a mixture of hydrocarbons that formed from plants and animals that lived millions of years ago. Crude oil is a fossil fuel, and it exists in liquid form in underground pools or reservoirs, in tiny spaces within sedimentary rocks, and near the surface in tar (or oil) sands
Price of product ( USD price or FOB price) : Price on request
Product origin : Worldwide
Key Specifications/Special Features :
Specifications for types/grades of crude (special grade needed by buyer)
will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
